Last time I checked the 3c59X line was a 10 MBPS half duplex card. the 3C90X series is the 100 MBPS card. You might want to double the card model, but you will never be able to make a 3c59x ANYTHING GO FASTER THAN 10 mBPS. > -----Original Message----- > From: redhat-list-admin@xxxxxxxxxx > [mailto:redhat-list-admin@xxxxxxxxxx]On Behalf Of Thierry ITTY > Sent: Wednesday, October 29, 2003 8:28 AM > To: redhat-list@xxxxxxxxxx > Subject: Re: 3c59x won't negotiate 100mb full duplex > > > what if you force it > mii-tool -F 100baseTx-FD eth1 > > hth > > > A 15:03 28/10/2003 -0600, vous avez écrit : > >I can't get a 3Com card (eth1) to negotiate 100mb, here are > the details of > >my setup. Any ideas what I can do ? > > > >modules.conf > >alias parport_lowlevel parport_pc > >alias scsi_hostadapter aic7xxx > >alias eth0 3c59x debug=9 options=4 full_duplex=1 > >alias scsi_hostadapter1 ips > >alias eth1 3c59x full_duplex=1 > >options 3c59x debug=3 options=0x30,0x30 full_duplex=1,1 > > > >mii-tool > >eth0: 100 Mbit, full duplex, link ok > >eth1: 10 Mbit, half duplex, no link > > > >/var/log/messages > >Oct 10 16:51:22 kernel: 01:0a.0: 3Com PCI 3c905B Cyclone > 100baseTx at > >0xe880. Vers LK1.1.18-ac > >Oct 10 16:51:22 kernel: 00:50:04:84:e0:4c, IRQ 10 > >Oct 10 16:51:22 kernel: product code 544e rev 00.9 date 05-13-99 > >Oct 10 16:51:22 kernel: Full duplex capable > >Oct 10 16:51:22 kernel: 8K byte-wide RAM 5:3 Rx:Tx split, > 100baseTX > >interface. > >Oct 10 16:51:22 kernel: Enabling bus-master transmits and > whole-frame > >receives. > > > >Thanks > > > >-- > > > > > >-- > >redhat-list mailing list > >unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe >https://www.redhat.com/mailman/listinfo/redhat-list > > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
