what if you force it mii-tool -F 100baseTx-FD eth1 hth A 15:03 28/10/2003 -0600, vous avez écrit : >I can't get a 3Com card (eth1) to negotiate 100mb, here are the details of >my setup. Any ideas what I can do ? > >modules.conf >alias parport_lowlevel parport_pc >alias scsi_hostadapter aic7xxx >alias eth0 3c59x debug=9 options=4 full_duplex=1 >alias scsi_hostadapter1 ips >alias eth1 3c59x full_duplex=1 >options 3c59x debug=3 options=0x30,0x30 full_duplex=1,1 > >mii-tool >eth0: 100 Mbit, full duplex, link ok >eth1: 10 Mbit, half duplex, no link > >/var/log/messages >Oct 10 16:51:22 kernel: 01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at >0xe880. Vers LK1.1.18-ac >Oct 10 16:51:22 kernel: 00:50:04:84:e0:4c, IRQ 10 >Oct 10 16:51:22 kernel: product code 544e rev 00.9 date 05-13-99 >Oct 10 16:51:22 kernel: Full duplex capable >Oct 10 16:51:22 kernel: 8K byte-wide RAM 5:3 Rx:Tx split, 100baseTX >interface. >Oct 10 16:51:22 kernel: Enabling bus-master transmits and whole-frame >receives. > >Thanks > >-- > > >-- >redhat-list mailing list >unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe >https://www.redhat.com/mailman/listinfo/redhat-list > > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
