I can't get a 3Com card (eth1) to negotiate 100mb, here are the details of my setup. Any ideas what I can do ? modules.conf alias parport_lowlevel parport_pc alias scsi_hostadapter aic7xxx alias eth0 3c59x debug=9 options=4 full_duplex=1 alias scsi_hostadapter1 ips alias eth1 3c59x full_duplex=1 options 3c59x debug=3 options=0x30,0x30 full_duplex=1,1 mii-tool eth0: 100 Mbit, full duplex, link ok eth1: 10 Mbit, half duplex, no link /var/log/messages Oct 10 16:51:22 kernel: 01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe880. Vers LK1.1.18-ac Oct 10 16:51:22 kernel: 00:50:04:84:e0:4c, IRQ 10 Oct 10 16:51:22 kernel: product code 544e rev 00.9 date 05-13-99 Oct 10 16:51:22 kernel: Full duplex capable Oct 10 16:51:22 kernel: 8K byte-wide RAM 5:3 Rx:Tx split, 100baseTX interface. Oct 10 16:51:22 kernel: Enabling bus-master transmits and whole-frame receives. Thanks -- -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
