Re: Transferring an existing system from non-RAID disks to RAID1 disks in the same computer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





Am 21.01.23 um 23:59 schrieb Reindl Harald:


Am 21.01.23 um 23:56 schrieb Pascal Hambourg:
On 21/01/2023 at 21:44, Reindl Harald wrote:
Am 21.01.23 um 21:04 schrieb Pascal Hambourg:
On 21/01/2023 at 19:57, Reindl Harald wrote:
Am 21.01.23 um 19:52 schrieb Pascal Hambourg:

No, EFI is not the root cause either. The root cause is carelessly storing stuff in the bootloader area as if it was part of the standard Linux filesystem. Guess what ? It is not.

LSB is dead

LSB has nothing to do with this

fine, so nobody else but you knows what "part of standard Linux filesystem" means - i can't read your mind

it's difficult wehn people mix different topics as well as questions about "what is" and "what would be nice if it would"

and if i would mix different topics like you i would throw https://bugzilla.redhat.com/show_bug.cgi?id=2162871 into this therad - but it don't belong to the tpoic because it's about "why the f** a system don't reboot/poweroff" while this topic is about "how do i get a system to boot"



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux