Re: Two drives in RAID6 array experienced similar error at or near beginning of drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 1/19/19 10:22 AM, Wols Lists wrote:
On 19/01/19 14:57, Basil Mohamed Gohar wrote:
You are all correct.  It could not be a RAID6.  I just read about the
two modes and I am sure I did RAID5 across 4 drives, because I had 24TB
of total space from 32TB of total drives (4 8TB drives). I recall
expecting 1 drive worth of resiliency, not two, hence my predicament.
I'm HOPING, from what you say, it might be a simple case of something
wiping the partition table. We have had that happen before. In that
case, if we can reconstruct the partition table, you'll get the array
back. If not ... :-(

Cheers,
Wol
This was my hope as well, but I wanted to be careful before I made any changes to the drives per the advice on the wiki, hence my reaching-out to the list.



[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux