Termination, Cabling and/or Drive Firmware Incompatibilities. Good idea to get your TSID ready, list of components and their firmware versions and call Adaptec Support and work through the discovery cookbook. Sincerely -- Mark Salyzyn -----Original Message----- From: linux-raid-owner@xxxxxxxxxxxxxxx [mailto:linux-raid-owner@xxxxxxxxxxxxxxx] On Behalf Of Brett I. Holcomb Sent: Saturday, March 19, 2005 1:22 AM To: linux-raid@xxxxxxxxxxxxxxx Subject: Adaptec 3210S Problems I'm running a Linux system with a Adaptec 3210S controller. Right now the system has nothing on it and I have not created any RAID. I've notice that when I boot into the Adaptec CD and watch the drives they keep getting flagged as missing. If I do a "Read system config" the drives show up and the flag goes away. A few minutes later they are flagged as missing again. This is a little discouraging as it appears I have a problem. Any ideas on what is happening - why do my drives keep getting flagged as missing? I need to find out before I install Linux! Thanks. -- Brett I. Holcomb brettholcomb@xxxxxxxxxxxxxxx Registered Linux User #188143 Remove R777 to email - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
