Hello List,
Having trouble setting the -D option in arecord to set the PCM by name.
If when I do "arecord -L" I get:
...
plughw:CARD=PCH,DEV=0
HDA Intel PCH, ALC1220 Analog
Hardware device with all software conversions
...
What is the PCM name? plughw?
I tried alot of names, but nothing is working. Well, "default" seems to be the only one.
I have two working sources, the sound device on the motherboard and a webcam here, 8 and 21, see below.
I using arecord in the default way, always data from the webcam is used.
If I try to select one with the -D option I get errors (no such file / device or resource busy)
If, using the configuration in pavucontrol, I turn one of the two off, than it works, but not
if both are active.
pactl list short sources
7 alsa_output.pci-0000_00_1f.3.analog-stereo.monitor module-alsa-card.c s16le 2ch 44100Hz RUNNING
8 alsa_input.pci-0000_00_1f.3.analog-stereo module-alsa-card.c s16le 2ch 44100Hz RUNNING
11 QuiskDigitalInput.monitor module-null-sink.c s16le 2ch 44100Hz RUNNING
12 QuiskDigitalOutput.monitor module-null-sink.c s16le 2ch 44100Hz RUNNING
21 alsa_input.usb-046d_09a4_07BDCE12-02.mono-fallback module-alsa-card.c s16le 1ch 16000Hz RUNNING
23 alsa_output.pci-0000_65_00.1.hdmi-stereo.monitor module-alsa-card.c s16le 2ch 44100Hz RUNNING
record -l
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC1220 Analog [ALC1220 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: ALC1220 Alt Analog [ALC1220 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: U0x46d0x9a4 [USB Device 0x46d:0x9a4], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
So the question is how to select a source using the -D option.
Thanks in advance,
Sietse
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
