Have you tried with some build optimization, e.g.: ./aconfigure CFLAGS="-O3 -DNDEBUG" and maybe some other things specific to your ARM platform. Cheers Benny On Wed, Jun 11, 2008 at 9:27 PM, C?sar Davi <cesargxn at gmail.com> wrote: > Hi All, > > I've made some changes suggested in > http://trac.pjsip.org/repos/wiki/FAQ#Performance: > > (my config_site.h file) > > #ifndef CONFIG_SITE_H_ > #define CONFIG_SITE_H_ > > > #define PJ_LOG_MAX_LEVEL 3 > #define PJSUA_DEFAULT_CLOCK_RATE (8000) > #define PJ_ENABLE_EXTRA_CHECK 0 > #define PJ_OS_HAS_CHECK_STACK 0 > #define PJSIP_SAFE_MODULE 0 > #define PJSIP_UNESCAPE_IN_PLACE 1 > #define PJ_HASH_USE_OWN_TOLOWER 1 > > #endif > /*CONFIG_SITE_H_*/ > > The CPU consumption is still high (sometimes 96 %). > > Does anyone have any suggestions? > > Thanks. > > Cesar > > > 2008/6/11 C?sar Davi <cesargxn at gmail.com>: >> Hi Benny, >> >> I'm using the EDB9302A board (cirrus logic), features: >> >> - ARM 9 processor - EP9302 - running at 200Mhz; >> - 64MByte SDRAM; >> - 16MByte NOR Flash Memory. >> >> Thanks for your help. >> >> Cesar >> >> 2008/6/10 Benny Prijono <bennylp at pjsip.org>: >>> On Tue, Jun 10, 2008 at 10:19 PM, C?sar Davi <cesargxn at gmail.com> wrote: >>>> Hi All, >>>> >>>> >>>> I'm developing an application to run in an ARM platform using embedded linux. >>>> I've cross-compiled it using pjsip 0.8.0 and arm-linux-gcc. I've >>>> downloaded the demo file >>>> (pjproject-0.8.0_arm/pjproject-0.8.0/pjsip-apps/bin/samples/siprtp-arm-linux-gnu >>>> ) to the target board using the >>>> option for 8 SIP calling: >>>> >>>> siprtp-arm-linux-gnu -c 8 >>>> >>>> The busybox TOP command has shown there were 12 threads and one of >>>> them was consuming 86% of CPU processing power (8 >>>> simultaneous call without audio, just SIP signalling). >>>> >>> >>> Actually although there is no audio, siprtp sample application does >>> send and receive RTP packets. So it's not totally idle on the media >>> side at all. >>> >>>> Is this high CPU consumption normal? >>> >>> Yeah it looks high. What ARM is that? >> >> >>> >>>> Is there a way to decrease it? >>>> How can I optimize my app? >>>> Is this 12 threads quantity normal for 8 SIP calling? >>>> >>> >>> In pjsip the number of threads (0-N) is chosen by application, and in >>> siprtp it happens that it uses one thread per call. As Tanguy pointed >>> out in the other mail, the link to the FAQ contains lots of switches >>> to enhance performance, please try that out. >>> >>> Cheers >>> Benny >>> >>>> Thanks in advance >>>> >>>> Cesar >>>> >>> >> >
