Hello,
I was also facing a similar issue with snd_hda_intel & realtek
codec under FC11.
I have created a file /etc/modprobe.d/sound.conf with the following
line & rebooted the pc & that fixed my issue.
options snd_hda_intel model=auto
If you look at the log of the kernel which detects the codec, you can
see that the module is not able to work with the parameter it
recevices, and it autoprobes the correct model.
>[ 19.012511] hda_codec: Unknown model for ALC262, trying
auto-probe from BIOS...
And it looks like in the second kernel, this is not happening. Check
for the parameters you are passing to the module under modprobe.d. Also
check whether the option 'model=auto' works..
Thanks for your reply,
Does /etc/modprobe.d/* differes for various kernels we use? Im using
both the kernels in a single debian os.
I
tried both the kernels with a fresh installation of debian too but even
in that only the kernel A detects the audio drive and loads the
modules, kernel B is not detecting it. But both are built with same
config file, except kernel A is compressed with gzip and kernel B is
with bzip
here is the content of /etc/modprobe.d/sound which is in defaulf or my
debian
alias snd-card-0 snd-opl3sa2
options snd-opl3sa2 index=0 fm_port=-1 midi_port=-1 port=0x370
wss_port=0x530 dma1=1 dma2=0 irq=15
Alagunambi Welkin
Hello,
Though I'm not an alsa expert, I think those configurations are meant
for 'Yamaha OPL3-SA2/SA3'. Can you remove that file from there after
taking a backup and boot the machine with kernel B and see whether it
works?
If that doesn't work, can you post the output of lsmod for both
kernels?. Also, recent alsa-utils package contains a shell script
called alsa-info which will collect information about sound h/w,
drivers, codecs used & other info. Can you execute 'alsa-info
--no-upload', the ouput will be stored under /tmp/alsa-info.txt and
post the output from both the kernels?
--
Sudheer
|
