Le Lundi 6 janvier 2014 14h03, Jean Delvare <khali@xxxxxxxxxxxx> a écrit : ...Most important here is the kernel version, and the board brand and model. ---> yahoo email does "top posting" and not "> quoting", it's bad to answer. kernel is 3.9.11 board is gigabyte GA-MA78GM-UD2H ...For example, try adding the following to a new file under /etc/sensors.d: ---> you mean /etc/sensors.conf ? chip "it8718-*" compute in3 @ * (6.8/10+1), @ / (6.8/10+1) This should make the +5V line look reasonable. The exact scaling factor depends on your board. ---> it works, now shows +5.05 V ...But first check if we do not already have a configuration file for your board... ---> do you know where to find it ? thanks in advance _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
