Hi, I run ssensors version 3.3.4 with libsensors version 3.3.4. (got the same results with other versions). # sensors it8718-isa-0228 Adapter: ISA adapter in0: +1.04 V (min = +0.00 V, max = +4.08 V) in1: +1.84 V (min = +0.00 V, max = +4.08 V) in2: +3.33 V (min = +0.00 V, max = +4.08 V) +5V: +3.01 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +3.22 V (min = +0.00 V, max = +4.08 V) in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM in7: +2.00 V (min = +0.00 V, max = +4.08 V) Vbat: +3.20 V fan1: 1979 RPM (min = 10 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) temp1: +34.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor temp2: +35.0 C (low = +127.0 C, high = +70.0 C) sensor = thermal diode temp3: +44.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor cpu0_vid: +1.050 V intrusion0: OK Remarks : Is it normal that +5V is displayed as +3.01 V ? Or should it be renamed as +...something else ? in6 should not be ALARM ? Thanks in advance _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
