On Thu, 9 Jan 2014 09:02:32 +0100, Jean Delvare wrote: > Hi Seth, > > On Wed, 8 Jan 2014 16:35:12 -0700, Seth Bardash wrote: > > (...) > > The CentOS based machine uses a much older kernel and libsensors > > code. > > > > (opensuse) 3.7.10-1.16-desktop versus (CentOS) > > 2.6.32-431.el6.x86_64 > > > > I downloaded the w83795 code and compiled it. > > The loaded it with: > > > > rmmod w83795 > > modprobe hwmon > > modprobe hwmon-vid > > modprobe i2c-core > > insmod ./w83795.ko > > > > But get an error of no hwmon found. > > I even ran modprobe i2c-piix4 first then ran the commands above > > but > > there is no entry in dmesg and sensors -s then sensors does not > > show anything. > > Odds are that you need an updated i2c-piix4 driver too. Check the PCI > ID of the SMBus controller (you can check which device got the > i2c-piix4 driver attached on your openSUSE 13.1 system.) Such an updated driver is now available for download from: http://khali.linux-fr.org/devel/lm-sensors/drivers/i2c-piix4/ Hope it helps, -- Jean Delvare http://khali.linux-fr.org/wishlist.html _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
