Hi Seth, On Wed, 8 Jan 2014 16:35:12 -0700, Seth Bardash wrote: > (...) > The CentOS based machine uses a much older kernel and libsensors > code. > > (opensuse) 3.7.10-1.16-desktop versus (CentOS) > 2.6.32-431.el6.x86_64 > > I downloaded the w83795 code and compiled it. > The loaded it with: > > rmmod w83795 > modprobe hwmon > modprobe hwmon-vid > modprobe i2c-core > insmod ./w83795.ko > > But get an error of no hwmon found. > I even ran modprobe i2c-piix4 first then ran the commands above > but > there is no entry in dmesg and sensors -s then sensors does not > show anything. Odds are that you need an updated i2c-piix4 driver too. Check the PCI ID of the SMBus controller (you can check which device got the i2c-piix4 driver attached on your openSUSE 13.1 system.) -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
