On Mon, 11 Nov 2013 22:25:04 -0800, p. stephen w wrote: > Running sensors gives: > nct6791-isa-0290 > > Based on that the command becomes: > Mint stephen # isadump -k 0x55,0x55 0x905 0x906 > > Which outputs: > 0 1 2 3 4 5 6 7 8 9 a b c d e f > 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > > > > If that's correct, I'll go a head and run the rest of them. No it's not correct, base address 0x290 leads to the following command: # isadump -k 0x55,0x55 0x295 0x296 As a side note, Guenter, I'd be very surprised if you actually need the -k here, all Super-I/O chips I saw so far needed a key to access the configuration space only, not the logical device I/O areas. -- Jean Delvare _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
