On Tue, Jul 09, 2013 at 12:00:13AM +0200, Jean Delvare wrote: > Hi Chris, > > On Mon, 08 Jul 2013 17:18:46 -0400, Chris Pattenden wrote: > > I'm working to configure lm_sensors and have notice a few strange issues. > > > > I'm working on a TI 8148 on custom hardware. > > Linux 2.6.37 > > lm_sensors lm_sensors-3.3.4 > > > > i2cdetect -l shows the following: > > > > i2c-2 i2c OMAP I2C adapter I2C adapter > > i2c-4 i2c OMAP I2C adapter I2C adapter > > > > > > > > I have two TI ADC128D818 ADCs (I cobbled together my own driver while > > waiting for support -- I see that someone else requested the same driver > > last week :-). They are: > > adc128d818-i2c-4-1d > > adc128d818-i2c-4-37 > > > > > > "sensors --bus-list" shows the following: > > bus "i2c-4" "OMAP I2C adapter" > > Why bus i2c-2 isn't shown, I don't know. That's likely an issue. > > No it's not. sensors --bus-list only lists the relevant buses - the > ones with at least one hwmon chip. There's no chip on i2c-2, so it's > not listed. > > > I started using the following sensors.conf: > > chip "adc128d818-i2c-4-1d" > > label in0 "Test" > > > > However, I was told that the "bus was unidentified". > > I used the following sensors.conf, hoping to fix the problem: > > bus "i2c-4" "OMAP I2C adapter" > > chip "adc128d818-i2c-4-1d" > > label in0 "Test" > > However, none in0 was not renamed as expected -- it printed as "in0". > > > > It turns out that sensors_substitute_busses() incorrectly renumbers > > adc128d818-i2c-4-1d to adc128d818-i2c-2-1d and then can't find the > > labels. > > The problem here is that your i2c bus driver is evil and attributes the > same name to two different buses. It should not do that. This is a bug > in the i2c-omap driver. It should give each bus a distinct name, for > example by including the base I/O address in it. > Unfortunately it is not the only such driver. Same output on P2020: i2c-0 i2c MPC adapter I2C adapter i2c-1 i2c MPC adapter I2C adapter And on P5040: i2c-0 i2c MPC adapter I2C adapter i2c-1 i2c MPC adapter I2C adapter i2c-2 i2c MPC adapter I2C adapter i2c-3 i2c MPC adapter I2C adapter Question is ... would a patch to fix that be accepted by the i2c maintainers ? Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
