Lars-Peter Clausen schrieb:
> The adt7420 is software compatible to the adt7410.
>
> Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
I did some basic testing of the patch-set until this one (instantiation, removal, get/set min/max/crit/hyst, monitor temperatures and alarm triggers while changing temperatures) on an ADT7410, all went fine. No suspend/resume tested.
Tested-by: Hartmut Knaack <knaack.h@xxxxxx>
> ---
> drivers/hwmon/Kconfig | 4 ++--
> drivers/hwmon/adt7410.c | 3 ++-
> 2 files changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 52d5174..89ac1cb 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -180,11 +180,11 @@ config SENSORS_ADM9240
> will be called adm9240.
>
> config SENSORS_ADT7410
> - tristate "Analog Devices ADT7410"
> + tristate "Analog Devices ADT7410/ADT7420"
> depends on I2C
> help
> If you say yes here you get support for the Analog Devices
> - ADT7410 temperature monitoring chip.
> + ADT7410 and ADT7420 temperature monitoring chips.
>
> This driver can also be built as a module. If so, the module
> will be called adt7410.
> diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
> index 99f6d32..99a7290 100644
> --- a/drivers/hwmon/adt7410.c
> +++ b/drivers/hwmon/adt7410.c
> @@ -407,6 +407,7 @@ static int adt7410_remove(struct i2c_client *client)
>
> static const struct i2c_device_id adt7410_ids[] = {
> { "adt7410", adt7410, },
> + { "adt7420", adt7410, },
> { /* LIST END */ }
> };
> MODULE_DEVICE_TABLE(i2c, adt7410_ids);
> @@ -455,5 +456,5 @@ static struct i2c_driver adt7410_driver = {
> module_i2c_driver(adt7410_driver);
>
> MODULE_AUTHOR("Hartmut Knaack");
> -MODULE_DESCRIPTION("ADT7410 driver");
> +MODULE_DESCRIPTION("ADT7410/ADT7420 driver");
> MODULE_LICENSE("GPL");
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
