This allows a userspace application to poll() on the alarm files to get notified
in case of an temperature threshold event.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/hwmon/adt7310.c | 4 ++--
drivers/hwmon/adt7410.c | 4 ++--
drivers/hwmon/adt7x10.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-----
drivers/hwmon/adt7x10.h | 4 ++--
4 files changed, 50 insertions(+), 11 deletions(-)
diff --git a/drivers/hwmon/adt7310.c b/drivers/hwmon/adt7310.c
index 0483e6c..dcd8d5a 100644
--- a/drivers/hwmon/adt7310.c
+++ b/drivers/hwmon/adt7310.c
@@ -127,13 +127,13 @@ static const struct adt7410_ops adt7310_spi_ops = {
static int adt7310_spi_probe(struct spi_device *spi)
{
- return adt7410_probe(&spi->dev, spi_get_device_id(spi)->name,
+ return adt7410_probe(&spi->dev, spi_get_device_id(spi)->name, spi->irq,
&adt7310_spi_ops);
}
static int adt7310_spi_remove(struct spi_device *spi)
{
- return adt7410_remove(&spi->dev);
+ return adt7410_remove(&spi->dev, spi->irq);
}
static const struct spi_device_id adt7310_id[] = {
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 13734c5..35880c6 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -84,12 +84,12 @@ static int adt7410_i2c_probe(struct i2c_client *client,
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- return adt7410_probe(&client->dev, NULL, &adt7410_i2c_ops);
+ return adt7410_probe(&client->dev, NULL, client->irq, &adt7410_i2c_ops);
}
static int adt7410_i2c_remove(struct i2c_client *client)
{
- return adt7410_remove(&client->dev);
+ return adt7410_remove(&client->dev, client->irq);
}
static const struct i2c_device_id adt7410_id[] = {
diff --git a/drivers/hwmon/adt7x10.c b/drivers/hwmon/adt7x10.c
index 2598aaf..d042596 100644
--- a/drivers/hwmon/adt7x10.c
+++ b/drivers/hwmon/adt7x10.c
@@ -30,6 +30,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/interrupt.h>
#include "adt7x10.h"
@@ -112,6 +113,26 @@ static const u8 ADT7410_REG_TEMP[4] = {
ADT7410_T_CRIT, /* critical */
};
+static irqreturn_t adt7410_irq_handler(int irq, void *private)
+{
+ struct device *dev = private;
+ u8 status;
+ int ret;
+
+ ret = adt7410_read_byte(dev, ADT7410_STATUS, &status);
+ if (ret)
+ return IRQ_HANDLED;
+
+ if (status & ADT7410_STAT_T_HIGH)
+ sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm");
+ if (status & ADT7410_STAT_T_LOW)
+ sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm");
+ if (status & ADT7410_STAT_T_CRIT)
+ sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm");
+
+ return IRQ_HANDLED;
+}
+
/*
* adt7410 register access by I2C
*/
@@ -359,7 +380,7 @@ static const struct attribute_group adt7410_group = {
.attrs = adt7410_attributes,
};
-int adt7410_probe(struct device *dev, const char *name,
+int adt7410_probe(struct device *dev, const char *name, int irq,
const struct adt7410_ops *ops)
{
struct adt7410_data *data;
@@ -383,11 +404,17 @@ int adt7410_probe(struct device *dev, const char *name,
return ret;
}
/*
- * Set to 16 bit resolution, continous conversion and comparator mode.
+ * Set to 16 bit resolution and continous conversion
*/
data->config = data->oldconfig;
- data->config &= ~ADT7410_MODE_MASK;
- data->config |= ADT7410_FULL | ADT7410_RESOLUTION | ADT7410_EVENT_MODE;
+ data->config &= ~(ADT7410_MODE_MASK | ADT7410_CT_POLARITY |
+ ADT7410_INT_POLARITY);
+ data->config |= ADT7410_FULL | ADT7410_RESOLUTION;
+
+ /* If we are not using interrupts use comperator mode */
+ if (irq <= 0)
+ data->config |= ADT7410_EVENT_MODE;
+
if (data->config != data->oldconfig) {
ret = adt7410_write_byte(dev, ADT7410_CONFIG, data->config);
if (ret)
@@ -421,8 +448,17 @@ int adt7410_probe(struct device *dev, const char *name,
goto exit_remove_name;
}
+ if (irq > 0) {
+ ret = request_threaded_irq(irq, NULL, adt7410_irq_handler,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT, name, dev);
+ if (ret)
+ goto exit_hwmon_device_unregister;
+ }
+
return 0;
+exit_hwmon_device_unregister:
+ hwmon_device_unregister(data->hwmon_dev);
exit_remove_name:
if (name)
device_remove_file(dev, &dev_attr_name);
@@ -434,10 +470,13 @@ exit_restore:
}
EXPORT_SYMBOL_GPL(adt7410_probe);
-int adt7410_remove(struct device *dev)
+int adt7410_remove(struct device *dev, int irq)
{
struct adt7410_data *data = dev_get_drvdata(dev);
+ if (irq > 0)
+ free_irq(irq, dev);
+
hwmon_device_unregister(data->hwmon_dev);
if (data->name)
device_remove_file(dev, &dev_attr_name);
diff --git a/drivers/hwmon/adt7x10.h b/drivers/hwmon/adt7x10.h
index 17c8053..173b094 100644
--- a/drivers/hwmon/adt7x10.h
+++ b/drivers/hwmon/adt7x10.h
@@ -32,9 +32,9 @@ struct adt7410_ops {
int (*write_byte)(struct device *, u8 reg, u8 data);
};
-int adt7410_probe(struct device *dev, const char *name,
+int adt7410_probe(struct device *dev, const char *name, int irq,
const struct adt7410_ops *ops);
-int adt7410_remove(struct device *dev);
+int adt7410_remove(struct device *dev, int irq);
#ifdef CONFIG_PM_SLEEP
--
1.8.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
