The adt7420 is software compatible to the adt7410.
Signed-off-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
---
drivers/hwmon/Kconfig | 4 ++--
drivers/hwmon/adt7410.c | 3 ++-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 52d5174..89ac1cb 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -180,11 +180,11 @@ config SENSORS_ADM9240
will be called adm9240.
config SENSORS_ADT7410
- tristate "Analog Devices ADT7410"
+ tristate "Analog Devices ADT7410/ADT7420"
depends on I2C
help
If you say yes here you get support for the Analog Devices
- ADT7410 temperature monitoring chip.
+ ADT7410 and ADT7420 temperature monitoring chips.
This driver can also be built as a module. If so, the module
will be called adt7410.
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 99f6d32..99a7290 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -407,6 +407,7 @@ static int adt7410_remove(struct i2c_client *client)
static const struct i2c_device_id adt7410_ids[] = {
{ "adt7410", adt7410, },
+ { "adt7420", adt7410, },
{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
@@ -455,5 +456,5 @@ static struct i2c_driver adt7410_driver = {
module_i2c_driver(adt7410_driver);
MODULE_AUTHOR("Hartmut Knaack");
-MODULE_DESCRIPTION("ADT7410 driver");
+MODULE_DESCRIPTION("ADT7410/ADT7420 driver");
MODULE_LICENSE("GPL");
--
1.8.0
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
