On Thu, Oct 11, 2012 at 12:56:38AM -0500, Ian Pilcher wrote: > On 10/10/2012 10:27 PM, Guenter Roeck wrote: > > Do you use the new nct6775 driver ? Can you provide the complete output of the > > sensors command ? > > I'm using the w83627ehf driver in Fedora 17 (3.5.6-1.fc17.x86_64). > There does not appear to be any nct6775 module, so I assume that it's > either not in 3.5.6 or not built as part of Fedora's kernel. > > # modinfo w83627ehf > filename: > /lib/modules/3.5.6-1.fc17.x86_64/kernel/drivers/hwmon/w83627ehf.ko > license: GPL > description: W83627EHF driver > author: Jean Delvare <khali@xxxxxxxxxxxx> > depends: hwmon-vid > intree: Y > vermagic: 3.5.6-1.fc17.x86_64 SMP mod_unload > parm: force_id:Override the detected device ID (ushort) > parm: fan_debounce:Enable debouncing for fan RPM signal (ushort) > > # modinfo nct6775 > ERROR: Module nct6775 not found. > Ok. The new driver is not upstream yet, so you would know if you use it. > sensors -c /dev/null says: > > coretemp-isa-0000 > Adapter: ISA adapter > Physical id 0: +42.0°C (high = +80.0°C, crit = +99.0°C) > Core 0: +36.0°C (high = +80.0°C, crit = +99.0°C) > Core 1: +42.0°C (high = +80.0°C, crit = +99.0°C) > Core 2: +35.0°C (high = +80.0°C, crit = +99.0°C) > Core 3: +30.0°C (high = +80.0°C, crit = +99.0°C) > > nct6775-isa-0290 > Adapter: ISA adapter > in0: +1.22 V (min = +0.20 V, max = +1.60 V) > in1: +0.76 V (min = +0.67 V, max = +0.82 V) > in2: +3.36 V (min = +2.98 V, max = +3.63 V) > in3: +3.36 V (min = +2.98 V, max = +3.63 V) > in4: +1.28 V (min = +1.18 V, max = +1.33 V) > in5: +1.48 V (min = +1.40 V, max = +1.60 V) > in6: +1.05 V (min = +0.60 V, max = +1.60 V) > in7: +3.28 V (min = +2.98 V, max = +3.63 V) > in8: +3.26 V (min = +2.70 V, max = +3.63 V) > fan1: 1506 RPM (min = 251 RPM, div = 32) > fan2: 629 RPM (min = 251 RPM, div = 32) > fan3: 1506 RPM (min = 251 RPM, div = 32) > fan4: 0 RPM (div = 128) > SYSTIN: +29.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU > diode > CPUTIN: +29.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU > diode > AUXTIN: -128.0°C sensor = CPU diode > PECI Agent 0: +42.0°C (high = +80.0°C, hyst = +75.0°C) > PCH_CHIP_TEMP: +46.0°C (high = +80.0°C, hyst = +75.0°C) > PECI Agent 1: +0.0°C (high = +80.0°C, hyst = +75.0°C) > cpu0_vid: +0.000 V > intrusion0: OK > Ok, then I guess it is more likely that the change was triggered by the BIOS update. Interesting. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
