On Sat, Feb 20, 2010 at 7:47 PM, Hans de Goede <j.w.r.degoede@xxxxxx> wrote: > On 02/20/2010 05:45 PM, Otto wrote: >> At the moment my Linux server is running kernel 2.6.31-19 and using the >> asus_atk0110 kernel module. As I discussed with Hans de Goede in Dutch >> below, unfortunately the command `sensors` is only functioning on my >> system when using the 'acpi_enforce_resources=lax' kernel option. Hans >> advised me to send this email, because I have an Asus motherboard and >> it's a bad idea to use both the acp_enforce_resources option and the >> asus_atk0110 driver. > > To be clear, iirc the problem is that although the asus_atk0110 driver loads > automatically, it does not work, and thus you need to specify > acpi_enforce_resources=lax and load the appropriate native drivers, correct? Otto can you send me a copy of the DSDT (/sys/firmware/acpi/tables/DSDT)? Luca _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
