Sensors 3.0.3 on CentOS 5.2 (kernel 2.6.18) on ASUS M2NPV-VM: Need Config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With some help from others, I was able to get an upgraded kernel module for
the IT8716F chip found on the ASUS M2NPV-VM motherboard, and running 'sensors'
now shows lots of sensor data. Unfortunately, much of it doesn't make any
sense.

Is it possible that someone has already create a sensors.conf file for this
version of lm_sensors and this ASUS motherboard?

If it helps any, here is the information I see from the BIOS hardware
monitoring page:

  Q-Fan Controller:    Enabled
  VCore Voltage   :    1.23V
  3.3V  Voltage   :    3.18V
  5.0V  Voltage   :    4.95V
 12.0V  Voltage   :   11.60V

  CPU Temp            42C
  M/B Temp            38C
  CPU Fan Speed       2163 RPM
  Chassis 1 Fan Speed    0 RPM
  Chassis 2 Fan Speed 4647 RPM
  Power Fan Speed        0 RPM

Can anyone share their sensors.conf file?

Thanks,






[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux