Some time ago, I upgraded my Linux machine to use a new motherboard: ASUS M2NPV-VM At that time, I was told (on this list) that my CentOS Linux kernel was too old for the 3.0.X version of the lm_sensors package. I've now upgraded the machine to CentOS 5.2, which includes the Linux kernel 2.6.18. I downloaded lm_sensors-3.0.3 from http://www.lm-sensors.org/wiki/Download and built/installed successfully. This included some changes to the system's ld.so.conf to include /usr/local/lib on the system LD path. When I ran sensors-detect, it found the following: It said it found 'ITE IT8716F Super IO Sensors', address 0x290, driver 'it87'. It also said it found an AMD K8 thermal sensor embedded with the CPU (driver 'k8temp'). I had it create the /etc/sysconfig/lm_sensors file, which looks like this (sans the comments): MODULE_0=it87 MODULE_1=k8temp I then created the /etc/init.d/lm_sensors file (as per the instructions) and started the service. I ran sensors -s (as root), but when I run sensors, the only output I get is this: k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +33.0?C Core1 Temp: +37.0?C Well, this appears to be showing me good CPU temps, but where is the rest of the it87 chip data? Did I miss a step? Thanks for any help.
