My motherboard is a Intel? Desktop Board D945GCZ <http://www.intel.com/products/motherboard/d945gcz/index.htm> . And i also re-tryed with the latest sensor-detect and didn't work. Thanks for all, Andre. Rudolf Marek escreveu: >Mathew Tebbens wrote: > > >>I'm also running the same chipset >>lm_sensors is not working for me also. >> >> > >Hmm strange. > > > >>Next adapter: SMBus I801 adapter at ece0 >>Do you want to scan it? (YES/no/selectively): YES >>Client found at address 0x08 >>Client found at address 0x30 >>Client found at address 0x31 >>Client found at address 0x32 >>Client found at address 0x33 >>Client found at address 0x44 >>Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed! >>Client found at address 0x50 >>Probing for `SPD EEPROM'... Success! >> (confidence 8, driver `eeprom') >>Probing for `DDC monitor'... Failed! >>Probing for `Maxim MAX6900'... Failed! >>Client found at address 0x51 >>Probing for `SPD EEPROM'... Success! >> (confidence 8, driver `eeprom') >>Client found at address 0x52 >>Probing for `SPD EEPROM'... Success! >> (confidence 8, driver `eeprom') >>Client found at address 0x53 >>Probing for `SPD EEPROM'... Success! >> (confidence 8, driver `eeprom') >>Client found at address 0x69 >> >> > >This means that the bus is working. But there are no interresting devices on the >bus. > > >Andre and Mathew, what model/brand is your motherboard? > >Can you re-try with the latest sensors-detect? > >http://www.lm-sensors.org/browser/lm-sensors/trunk/prog/detect/sensors-detect?format=txt > >Save this file, and change the file permissions to exect or run as: > >perl ./sensors-detect > >Regards >Rudolf > > > > >
