Mathew Tebbens wrote: > I'm also running the same chipset > lm_sensors is not working for me also. Hmm strange. > Next adapter: SMBus I801 adapter at ece0 > Do you want to scan it? (YES/no/selectively): YES > Client found at address 0x08 > Client found at address 0x30 > Client found at address 0x31 > Client found at address 0x32 > Client found at address 0x33 > Client found at address 0x44 > Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed! > Client found at address 0x50 > Probing for `SPD EEPROM'... Success! > (confidence 8, driver `eeprom') > Probing for `DDC monitor'... Failed! > Probing for `Maxim MAX6900'... Failed! > Client found at address 0x51 > Probing for `SPD EEPROM'... Success! > (confidence 8, driver `eeprom') > Client found at address 0x52 > Probing for `SPD EEPROM'... Success! > (confidence 8, driver `eeprom') > Client found at address 0x53 > Probing for `SPD EEPROM'... Success! > (confidence 8, driver `eeprom') > Client found at address 0x69 This means that the bus is working. But there are no interresting devices on the bus. Andre and Mathew, what model/brand is your motherboard? Can you re-try with the latest sensors-detect? http://www.lm-sensors.org/browser/lm-sensors/trunk/prog/detect/sensors-detect?format=txt Save this file, and change the file permissions to exect or run as: perl ./sensors-detect Regards Rudolf
