try modprobing i2c-isa then it should work. Charles Bailey wrote: > Tried CVS i2c lk-24 and lm_sensors2 per your reply. Both build and > install fine. ./prog/detect/sensors-detect again picks up the AMD768, > but fails loading i2c-amd756, apparently because it's now in > i2c/busses. It also fails to locate the 627HF, both before and after > the amd756 module is loaded manually (not that that should matter, > afaict). If I load modules manually, yielding > > Module Size Used by Not tainted > w83627hf 13044 0 (unused) > i2c-proc 8116 0 [w83627hf] > i2c-amd756 3848 0 > i2c-dev 4992 0 > i2c-core 20164 0 [w83627hf i2c-proc i2c-amd756 i2c-dev] > > I still have no luck: > > [bailey at XXX ~]% /usr/local/bin/sensors > No sensors found! > > If I add the eeprom chip driver, I get little more: > > [bailey at XXX ~]% /usr/local/bin/sensors > eeprom-i2c-0-50 > Adapter: SMBus AMD75x adapter at 06e0 > Algorithm: Non-I2C SMBus adapter > Memory type: DDR SDRAM DIMM SPD > Memory size (MB): 512 > > eeprom-i2c-0-51 > Adapter: SMBus AMD75x adapter at 06e0 > Algorithm: Non-I2C SMBus adapter > > [bailey at XXX ~]% > > I'm happy to test changes or provide additional data if that would help. > > -- > Regards, > Charles Bailey < baileych _at_ mail _dot_ med _dot_ upenn _dot_ edu > > Fellow, Pediatric Hematology/Oncology > Children's Hospital of Philadelphia/University of Pennsylvania >
