Tried CVS i2c lk-24 and lm_sensors2 per your reply. Both build and install fine. ./prog/detect/sensors-detect again picks up the AMD768, but fails loading i2c-amd756, apparently because it's now in i2c/busses. It also fails to locate the 627HF, both before and after the amd756 module is loaded manually (not that that should matter, afaict). If I load modules manually, yielding Module Size Used by Not tainted w83627hf 13044 0 (unused) i2c-proc 8116 0 [w83627hf] i2c-amd756 3848 0 i2c-dev 4992 0 i2c-core 20164 0 [w83627hf i2c-proc i2c-amd756 i2c-dev] I still have no luck: [bailey at XXX ~]% /usr/local/bin/sensors No sensors found! If I add the eeprom chip driver, I get little more: [bailey at XXX ~]% /usr/local/bin/sensors eeprom-i2c-0-50 Adapter: SMBus AMD75x adapter at 06e0 Algorithm: Non-I2C SMBus adapter Memory type: DDR SDRAM DIMM SPD Memory size (MB): 512 eeprom-i2c-0-51 Adapter: SMBus AMD75x adapter at 06e0 Algorithm: Non-I2C SMBus adapter [bailey at XXX ~]% I'm happy to test changes or provide additional data if that would help. -- Regards, Charles Bailey < baileych _at_ mail _dot_ med _dot_ upenn _dot_ edu > Fellow, Pediatric Hematology/Oncology Children's Hospital of Philadelphia/University of Pennsylvania
