Dear Jean, Sorry about sending only to you. Thanks for the reply If anyone has any idea to solve this, it would be great. P.V.Anthony ----- Original Message ----- From: "Jean Delvare" <khali at linux-fr.org> To: "P.V.Anthony" <anthony at mindmedia.com.sg> Cc: "LM Sensors" <sensors at stimpy.netroedge.com> Sent: Friday, March 07, 2003 5:16 PM Subject: Re: Works great first. After restart do not work. > > *** PLEASE REPLY TO THE LIST, NOT TO ME ONLY *** > > > Dear Jean, > > > > Thank you for the reply. > > > > I have tried "sensors -s" it still do not work. I get the same output. > > > > As for the modules, these are the ones I have added in file "/etc/rc" > > > > #----cut here---- > > # I2C adapter drivers > > modprobe i2c-piix4 > > # I2C chip drivers > > modprobe adm1024 > > modprobe lm75 > > modprobe eeprom > > #----cut here---- > > > > Have I added them in the right file? If it is wrong please recommend a > > right file. > > Well, it actually depends on your distribution, but if it sometimes > works, then it must be the good location for your system. > > > The strange thing is that if I do a complete shutdown with shuting > > down the power, then start with turning on the power, it works great. > > If I do a restart without shuting down the power, I get this problem. > > That's a really valueable information. This would mean that the bus > isn't correctly reset or initialized. It is then beyond my personnal > knowledge, though. Maybe someone else on the list has an idea?
