Dear Sir/Madam,
I am using Redhat 7.3 with kernel 2.4.18-24.7.xsmp (SMP)
Motherboard is Intel ServerWorks
After installing and runing is works great using adm 1024.
Then when I do a shutdown -r now, It does not work anymore. Below is what I get.
The 3.3V is now 0
5V is now 0
12V is now 0
sys Temp is wrong
CPU2 Temp is wrong
CPU1 Temp is wrong
When I do shutdown -h now and off the unit then power up again it works.
What am I doing wrong?
P.V.Anthony
----------------------- Output I get after shutdown -r now ------------------
adm1024-i2c-0-2c
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
3.3V: +0.00 V (min = +2.93 V, max = +3.59 V)
5V: +0.00 V (min = +4.45 V, max = +5.44 V)
12V: +0.00 V (min = +10.68 V, max = +13.06 V)
CPU1 fan: 7500 RPM (min = 3000 RPM, div = 2)
CPU2 fan: 3994 RPM (min = 3000 RPM, div = 2)
SYS Temp: -127.0?C (limit = +50?C, hysteresis = +60?C)
CPU2 Temp:+128.0?C (limit = +50?C, hysteresis = +60?C)
CPU1 Temp:+128.0?C (limit = +50?C, hysteresis = +60?C)
vid: +1.65 V
alarms: Chassis intrusion detection
lm75-i2c-0-48
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
temp: +24.5?C (limit = +60.0?C, hysteresis = +50.0?C)
lm75-i2c-0-49
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
temp: +25.5?C (limit = +60.0?C, hysteresis = +50.0?C)
eeprom-i2c-0-50
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 512
eeprom-i2c-0-51
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
eeprom-i2c-0-54
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 512
eeprom-i2c-0-55
Adapter: SMBus PIIX4 adapter at 0580
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030307/29b155a6/attachment.html
