Hi. I tried to install and use lm_sensors for my server at home. It has an Asus A7A266-Board. The detect and the infos at http://www.cs.utexas.edu/users/bdbryant/howtos/hardware/asus-a7a266/lm_sensors/ said to use the module w83781d. But I can't use it? I tried something... modprobe i2c-ali1535 is OK modprobe w83781d (and lm75) make my PC do a never ending high tone beep. I only can shut down then (system hangs at umount) and: I alwys had "no sensors found" do you have some Ideas/Hints for me?? my /var/log/messages: Jan 12 21:32:23 server kernel: i2c-core.o: i2c core module version 2.7.0 (20021208) Jan 12 21:32:23 server kernel: i2c-ali15x3.o version 2.7.0 (20021208) Jan 12 21:32:23 server kernel: i2c-ali15x3.o: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr Jan 12 21:32:23 server kernel: i2c-ali15x3.o: ALI15X3 not detected, module not inserted. Jan 12 21:32:27 server kernel: i2c-core.o: i2c core module version 2.7.0 (20021208) Jan 12 21:32:27 server kernel: i2c-ali1535.o version 2.7.0 (20021208) Jan 12 21:32:27 server kernel: i2c-ali1535.o: ALI1535 SMBus Controller detected and initialized Jan 12 21:32:29 server kernel: i2c-algo-bit.o: i2c bit algorithm module version 2.7.0 (20021208) Jan 12 21:32:29 server kernel: i2c-voodoo3.o version 2.7.0 (20021208) Jan 12 21:32:29 server kernel: i2c-voodoo3: Using Banshee/Voodoo3 at 0xd0921000 Jan 12 21:32:29 server kernel: i2c-voodoo3: 1 Banshee/Voodoo3 found. Jan 12 21:32:29 server kernel: i2c-voodoo3.o: I2C bus initialized Jan 12 21:32:29 server kernel: i2c-voodoo3.o: DDC bus initialized Jan 12 21:32:33 server kernel: i2c-algo-pcf.o: i2c pcf8584 algorithm module version 2.7.0 (20021208) Jan 12 21:32:33 server kernel: i2c-elektor.o: i2c pcf8584-isa adapter module version 2.7.0 (20021208) Jan 12 21:32:35 server kernel: i2c-elv.o: i2c ELV parallel port adapter module version 2.7.0 (20021208) Jan 12 21:32:36 server kernel: i2c-philips-par.o: i2c Philips parallel port adapter module version 2.7.0 (20021208) Jan 12 21:32:36 server insmod: /lib/modules/2.4.18-14/kernel/drivers/parport/parport_pc.o: init_module: Device or resource bus y Jan 12 21:32:36 server insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ p arameters. You may find more information in syslog or the output from dmesg Jan 12 21:32:36 server insmod: /lib/modules/2.4.18-14/kernel/drivers/parport/parport_pc.o: insmod parport_lowlevel failed Jan 12 21:32:38 server kernel: i2c-velleman.o: i2c Velleman K8000 adapter module version 2.7.0 (20021208) Jan 12 21:32:42 server kernel: i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208) Jan 12 21:32:45 server kernel: i2c-ali1535.o: Error: command never completed Jan 12 21:32:46 server last message repeated 123 times Jan 12 21:33:56 server kernel: i2c-ali15x3.o version 2.7.0 (20021208) Jan 12 21:33:56 server kernel: i2c-ali15x3.o: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr Jan 12 21:33:56 server kernel: i2c-ali15x3.o: ALI15X3 not detected, module not inserted. Jan 12 21:33:59 server kernel: i2c-algo-pcf.o: i2c pcf8584 algorithm module version 2.7.0 (20021208) Jan 12 21:33:59 server kernel: i2c-elektor.o: i2c pcf8584-isa adapter module version 2.7.0 (20021208) Jan 12 21:34:02 server kernel: i2c-velleman.o: i2c Velleman K8000 adapter module version 2.7.0 (20021208) Jan 12 21:34:03 server kernel: i2c-ali1535.o: Error: command never completed Jan 12 21:34:04 server last message repeated 123 times Jan 12 21:36:23 server kernel: i2c-proc.o version 2.7.0 (20021208) Jan 12 21:36:23 server kernel: w83781d.o version 2.7.0 (20021208) Jan 12 21:36:23 server kernel: i2c-ali1535.o: Error: command never completed Jan 12 21:36:23 server last message repeated 14 times
