I assume you are using the force_addr parameter as recommended in dmesg. We know about the "command never completed" problem but don't have a fix because we don't have a datasheet. Be sure that you have a chip supported by the w83781d driver (look at your board) Don't load the parallel port drivers, they aren't helping. Benjamin Henne wrote: > Hi. > I tried to install and use lm_sensors for my server at home. > It has an Asus A7A266-Board. > > The detect and the infos at > http://www.cs.utexas.edu/users/bdbryant/howtos/hardware/asus-a7a266/lm_sensors/ > > said > to use the module w83781d. But I can't use it? > I tried something... > > modprobe i2c-ali1535 is OK > > modprobe w83781d > (and lm75) > > make my PC do a never ending high tone beep. I only can shut down then > (system hangs at umount) > > and: I alwys had "no sensors found" > > do you have some Ideas/Hints for me?? > > > > my > /var/log/messages: > > > Jan 12 21:32:23 server kernel: i2c-core.o: i2c core module version 2.7.0 > (20021208) > Jan 12 21:32:23 server kernel: i2c-ali15x3.o version 2.7.0 (20021208) > Jan 12 21:32:23 server kernel: i2c-ali15x3.o: ALI15X3_smb region > uninitialized - upgrade BIOS or use force_addr=0xaddr > Jan 12 21:32:23 server kernel: i2c-ali15x3.o: ALI15X3 not detected, > module not inserted. > Jan 12 21:32:27 server kernel: i2c-core.o: i2c core module version 2.7.0 > (20021208) > Jan 12 21:32:27 server kernel: i2c-ali1535.o version 2.7.0 (20021208) > Jan 12 21:32:27 server kernel: i2c-ali1535.o: ALI1535 SMBus Controller > detected and initialized > Jan 12 21:32:29 server kernel: i2c-algo-bit.o: i2c bit algorithm module > version 2.7.0 (20021208) > Jan 12 21:32:29 server kernel: i2c-voodoo3.o version 2.7.0 (20021208) > Jan 12 21:32:29 server kernel: i2c-voodoo3: Using Banshee/Voodoo3 at > 0xd0921000 > Jan 12 21:32:29 server kernel: i2c-voodoo3: 1 Banshee/Voodoo3 found. > Jan 12 21:32:29 server kernel: i2c-voodoo3.o: I2C bus initialized > Jan 12 21:32:29 server kernel: i2c-voodoo3.o: DDC bus initialized > Jan 12 21:32:33 server kernel: i2c-algo-pcf.o: i2c pcf8584 algorithm > module version 2.7.0 (20021208) > Jan 12 21:32:33 server kernel: i2c-elektor.o: i2c pcf8584-isa adapter > module version 2.7.0 (20021208) > Jan 12 21:32:35 server kernel: i2c-elv.o: i2c ELV parallel port adapter > module version 2.7.0 (20021208) > Jan 12 21:32:36 server kernel: i2c-philips-par.o: i2c Philips parallel > port adapter module version 2.7.0 (20021208) > Jan 12 21:32:36 server insmod: > /lib/modules/2.4.18-14/kernel/drivers/parport/parport_pc.o: init_module: > Device or resource bus > y > Jan 12 21:32:36 server insmod: Hint: insmod errors can be caused by > incorrect module parameters, including invalid IO or IRQ p > arameters. You may find more information in syslog or the output > from dmesg > Jan 12 21:32:36 server insmod: > /lib/modules/2.4.18-14/kernel/drivers/parport/parport_pc.o: insmod > parport_lowlevel failed > Jan 12 21:32:38 server kernel: i2c-velleman.o: i2c Velleman K8000 > adapter module version 2.7.0 (20021208) > Jan 12 21:32:42 server kernel: i2c-dev.o: i2c /dev entries driver module > version 2.7.0 (20021208) > Jan 12 21:32:45 server kernel: i2c-ali1535.o: Error: command never > completed > Jan 12 21:32:46 server last message repeated 123 times > Jan 12 21:33:56 server kernel: i2c-ali15x3.o version 2.7.0 (20021208) > Jan 12 21:33:56 server kernel: i2c-ali15x3.o: ALI15X3_smb region > uninitialized - upgrade BIOS or use force_addr=0xaddr > Jan 12 21:33:56 server kernel: i2c-ali15x3.o: ALI15X3 not detected, > module not inserted. > Jan 12 21:33:59 server kernel: i2c-algo-pcf.o: i2c pcf8584 algorithm > module version 2.7.0 (20021208) > Jan 12 21:33:59 server kernel: i2c-elektor.o: i2c pcf8584-isa adapter > module version 2.7.0 (20021208) > Jan 12 21:34:02 server kernel: i2c-velleman.o: i2c Velleman K8000 > adapter module version 2.7.0 (20021208) > Jan 12 21:34:03 server kernel: i2c-ali1535.o: Error: command never > completed > Jan 12 21:34:04 server last message repeated 123 times > Jan 12 21:36:23 server kernel: i2c-proc.o version 2.7.0 (20021208) > Jan 12 21:36:23 server kernel: w83781d.o version 2.7.0 (20021208) > Jan 12 21:36:23 server kernel: i2c-ali1535.o: Error: command never > completed > Jan 12 21:36:23 server last message repeated 14 times > >
