On Thu, Oct 19, 2023 at 07:58:56PM +0800, Shiji Yang wrote: > 1. Do not hard reset the BBP. We can use soft reset instead. This > change has some help to the calibration failure issue. > 2. Enable falling back to legacy rate from the HT/RTS rate by > setting the HT_FBK_TO_LEGACY register. > 3. Implement MCS rate specific maximum PSDU size. It can improve > the transmission quality under the low RSSI condition. > 4. Set BBP_84 register value to 0x19. This is used for extension > channel overlapping IOT. > > Signed-off-by: Shiji Yang <yangshiji66@xxxxxxxxxxx> Acked-by: Stanislaw Gruszka <stf_xl@xxxxx>
