On Thu, Oct 19, 2023 at 07:58:57PM +0800, Shiji Yang wrote:
> 1. Move the channel configuration code from rt2800_vco_calibration()
> to the rt2800_config_channel().
> 2. Use MT7620 SoC specific AGC initial LNA value instead of the
> RT5592's value.
> 3. BBP{195,196} pairing write has been replaced with
> rt2800_bbp_glrt_write() to reduce redundant code.
>
> Signed-off-by: Shiji Yang <yangshiji66@xxxxxxxxxxx>
Acked-by: Stanislaw Gruszka <stf_xl@xxxxx>
