Shiji Yang <yangshiji66@xxxxxxxxxxx> wrote: > 1. Do not hard reset the BBP. We can use soft reset instead. This > change has some help to the calibration failure issue. > 2. Enable falling back to legacy rate from the HT/RTS rate by > setting the HT_FBK_TO_LEGACY register. > 3. Implement MCS rate specific maximum PSDU size. It can improve > the transmission quality under the low RSSI condition. > 4. Set BBP_84 register value to 0x19. This is used for extension > channel overlapping IOT. > > Signed-off-by: Shiji Yang <yangshiji66@xxxxxxxxxxx> > Acked-by: Stanislaw Gruszka <stf_xl@xxxxx> 3 patches applied to wireless-next.git, thanks. 1ffe76d5ae78 wifi: rt2x00: improve MT7620 register initialization a28533c6be17 wifi: rt2x00: rework MT7620 channel config function cca74bed37af wifi: rt2x00: rework MT7620 PA/LNA RF calibration -- https://patchwork.kernel.org/project/linux-wireless/patch/TYAP286MB031553CCD4B7A3B89C85935DBCD4A@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
