On 7 November 2016 at 18:06, Valo, Kalle <kvalo@xxxxxxxxxxxxxxxx> wrote: > Bruno Antunes <baantunes@xxxxxxxxx> writes: > >> On 4 November 2016 at 21:17, Valo, Kalle <kvalo@xxxxxxxxxxxxxxxx> wrote: >>> Bruno Antunes <baantunes@xxxxxxxxx> writes: >>> >>>> Old thread but I think the issue is still present. >>>> >>>> I'm running a setup with VLANs with WDS and ath10k cards. >>>> >>>> To make it work both cards must be loaded in rawmode, AP >>>> and Sta, and with no security. >>>> >>>> I'm using a OpenWrt trunk r49941 and the most recent firmware, >>>> 10.2.4.70.58, from Kalle ath10k firmware tree. >>>> >>>> Although it works the throughput is very bad. >>>> Are there any alternatives to improve the throughput. >>> >>> Can someone file a bug to bugzilla about this so that all the info is >>> properly stored? The more comprehensive the report is the better. >>> >>> https://bugzilla.kernel.org/ >> >> I will file a bug report. > > Thanks, it's good to store all in one place so that it's easier to find > the relevant info. Just file the bug with the ID 187241 - VLAN support in ATH10k Feel free to ask for adicional info. I did not mention any names in the bug report fell free to take credit if wanted. Regards, Bruno > >> But since it appears to be a firmware related issue >> under what category can fill in the bug? > > You can file it under Drivers/network-wireless, AFAIK we don't have any > separate components for firmware bugs. Here's one example to follow: > > https://bugzilla.kernel.org/show_bug.cgi?id=186161 > > -- > Kalle Valo > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@xxxxxxxxxxxxxxxxx > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
