This only happens when you use STA + WDS, or is .1q broken for you in other cases as well? Thanks, Ben On 12/08/2015 06:29 AM, Cedric VONCKEN wrote:
I'm testing to transmit frame with 802.1q tag (VLAN). My client is set in STA + WDS and the netdev is bridged with eth0. I have a computer with vlan configuration set connected to the STA eth0. If I try to transmit frames with 802.1q tag, the frames are not sent. I checked with wireless sniffer, and I don't see the frame with VLAN tag (the frames without VLAN tag are sent). I tested with firmware 10.2.4.70.14-2 from kale github, 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from openwrt, and in all cases I have the same issue. Thanks for your help. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
-- Ben Greear <greearb@xxxxxxxxxxxxxxx> Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
