> -----Message d'origine----- > De : Ben Greear [mailto:greearb@xxxxxxxxxxxxxxx] > Envoyé : mercredi 9 décembre 2015 16:34 > À : Cedric VONCKEN; ath10k@xxxxxxxxxxxxxxxxxxx; linux-wireless > Objet : Re: ATH10K VLAN firmware issue > > This only happens when you use STA + WDS, or is .1q broken for you in > other cases as well? No, this issue occurs in all modes (STA, STA + WDS, AP). Thanks Cedric. > > Thanks, > Ben > > On 12/08/2015 06:29 AM, Cedric VONCKEN wrote: > > I'm testing to transmit frame with 802.1q tag (VLAN). > > > > My client is set in STA + WDS and the netdev is bridged with eth0. > > I have a computer with vlan configuration set connected to the STA > > eth0. > > > > If I try to transmit frames with 802.1q tag, the frames are not sent. > > I checked with wireless sniffer, and I don't see the frame with VLAN > > tag (the frames without VLAN tag are sent). > > > > I tested with firmware 10.2.4.70.14-2 from kale github, > > 10.1.467-ct-com-full-015 from candelatech and 10.2.4.70-2 from > > openwrt, and in all cases I have the same issue. > > > > Thanks for your help. > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe > > linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > -- > Ben Greear <greearb@xxxxxxxxxxxxxxx> > Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
