Bruno Antunes <baantunes@xxxxxxxxx> writes: > On 4 November 2016 at 21:17, Valo, Kalle <kvalo@xxxxxxxxxxxxxxxx> wrote: >> Bruno Antunes <baantunes@xxxxxxxxx> writes: >> >>> Old thread but I think the issue is still present. >>> >>> I'm running a setup with VLANs with WDS and ath10k cards. >>> >>> To make it work both cards must be loaded in rawmode, AP >>> and Sta, and with no security. >>> >>> I'm using a OpenWrt trunk r49941 and the most recent firmware, >>> 10.2.4.70.58, from Kalle ath10k firmware tree. >>> >>> Although it works the throughput is very bad. >>> Are there any alternatives to improve the throughput. >> >> Can someone file a bug to bugzilla about this so that all the info is >> properly stored? The more comprehensive the report is the better. >> >> https://bugzilla.kernel.org/ > > I will file a bug report. Thanks, it's good to store all in one place so that it's easier to find the relevant info. > But since it appears to be a firmware related issue > under what category can fill in the bug? You can file it under Drivers/network-wireless, AFAIK we don't have any separate components for firmware bugs. Here's one example to follow: https://bugzilla.kernel.org/show_bug.cgi?id=186161 -- Kalle Valo
