On Tue, Dec 01, 2015 at 11:28:25AM +0100, Bartlomiej Grzeskowiak wrote: > I have tested borad-2.bin file with my module, by forcing > ar->id.subsystem_vendor = 0x168c; > ar->id.subsystem_device = 0x3363; (1,2,3) > in ath/ath10k/pci.c file. > > All the tests failed with: > ath10k_pci 0000:01:00.0: failed to receive initialized event from > target: 00000000 > ath10k_pci 0000:01:00.0: firmware crashed! (uuid > 5506e81c-d538-4492-91d7-dc899fed8d8c) > > Does it mean, that this module is not supported? > I will need to dump firmware from windows driver, when I get it from > the vendor ? > Can you please apply below changes in your rc2 backports. https://github.com/kvalo/ath/commit/2727a743e9eeb3d4063d4077afee3fd2a5e198ca https://github.com/kvalo/ath/commit/6419fdbb6f90e147690f8833cba59d289d613da5 or try with latest backports. https://www.kernel.org/pub/linux/kernel/projects/backports/2015/11/20/backports-20151120.tar.gz -Rajkumar -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
