On 1 December 2015 at 09:42, Michal Kazior <michal.kazior@xxxxxxxxx> wrote: > On 1 December 2015 at 09:38, Bartlomiej Grzeskowiak > <bartlomiej.grzeskowiak@xxxxxxxxx> wrote: >> Hi, >> >> I have already tried with backports 4.2.6 and different combinations >> of firmware.bin / board.bin. With differnt results, but none of them >> works. I will redo the tests and summarize them. >> >> Loading with irq_mode=1 gives me following result: >> [55416.824364] ath10k_pci 0000:01:00.0: limiting irq mode to: 1 >> [55416.830102] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0 >> irq_mode 1 reset_mode 0 >> [55417.212048] ath10k_pci 0000:01:00.0: could not fetch firmware file >> 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 >> [55424.394422] ath10k_pci 0000:01:00.0: wmi unified ready event not received >> [55424.436023] ath10k_pci 0000:01:00.0: firmware crashed! (uuid >> e082ac60-7c2d-4d14-9c49-fd5b0591c95c) >> [55424.445008] ath10k_pci 0000:01:00.0: qca6174 hw3.2 (0x05030000, > > Oh, wait. > > You have hw3.2? I haven't noticed that earlier. > > If memory serves right it needs a different board.bin (compared to > e.g. hw3.0). I'm not sure if it's available in Kalle's repository. > Wrong board.bin can cause firmware to hang or crash during init. Could you give a try to the board-2.bin file, which is sort of a container for the board bins, ath10k shall support.. and say if it solves your card problem? *) https://github.com/kvalo/ath10k-firmware/blob/master/QCA6174/hw3.0/board-2.bin -- Bartosz -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
