HI,
Yes, I am testing it now:
ath10k_pci 0000:01:00.0: boot get otp board id result 0x00000001
board_id 0 chip_id 0
ath10k_pci 0000:01:00.0: boot using board name
'bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000'
ath10k_pci 0000:01:00.0: board name
ath10k_pci 0000:01:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64
6f 72 3d 31 bus=pci,vendor=1
ath10k_pci 0000:01:00.0: 00000010: 36 38 63 2c 64 65 76 69 63 65 3d 30
30 33 65 2c 68c,device=003e,
ath10k_pci 0000:01:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65
6e 64 6f 72 subsystem-vendor
ath10k_pci 0000:01:00.0: 00000030: 3d 31 36 38 63 2c 73 75 62 73 79 73
74 65 6d 2d =168c,subsystem-
ath10k_pci 0000:01:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 36 31
device=3361
ath10k_pci 0000:01:00.0: board name
ath10k_pci 0000:01:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64
6f 72 3d 31 bus=pci,vendor=1
ath10k_pci 0000:01:00.0: 00000010: 36 38 63 2c 64 65 76 69 63 65 3d 30
30 33 65 2c 68c,device=003e,
ath10k_pci 0000:01:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65
6e 64 6f 72 subsystem-vendor
ath10k_pci 0000:01:00.0: 00000030: 3d 31 36 38 63 2c 73 75 62 73 79 73
74 65 6d 2d =168c,subsystem-
ath10k_pci 0000:01:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 36 32
device=3362
ath10k_pci 0000:01:00.0: board name
ath10k_pci 0000:01:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64
6f 72 3d 31 bus=pci,vendor=1
ath10k_pci 0000:01:00.0: 00000010: 36 38 63 2c 64 65 76 69 63 65 3d 30
30 33 65 2c 68c,device=003e,
ath10k_pci 0000:01:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65
6e 64 6f 72 subsystem-vendor
ath10k_pci 0000:01:00.0: 00000030: 3d 31 36 38 63 2c 73 75 62 73 79 73
74 65 6d 2d =168c,subsystem-
ath10k_pci 0000:01:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 36 33
device=3363
ath10k_pci 0000:01:00.0: failed to fetch board data for
ath10k/QCA6174/hw3.0 from
bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000/board-2.bin,
board_len= 0, board_data= 0x0
ath10k_pci 0000:01:00.0: failed to fetch board data
ath10k_pci 0000:01:00.0: failed to fetch board file: -2
ath10k_pci 0000:01:00.0: boot hif power down
ath10k_pci 0000:01:00.0: could not probe fw (-2)
ath10k_pci 0000:01:00.0: pci ps timer refcount 0 awake 1
ath10k_pci 0000:01:00.0: pci ps sleep reg refcount 0 awake 1
Strange that my card is subsystem-vendor=0000,subsystem-device=0000...
2015-12-01 10:43 GMT+01:00 Bartosz Markowski <bartosz.markowski@xxxxxxxxx>:
> On 1 December 2015 at 09:42, Michal Kazior <michal.kazior@xxxxxxxxx> wrote:
>> On 1 December 2015 at 09:38, Bartlomiej Grzeskowiak
>> <bartlomiej.grzeskowiak@xxxxxxxxx> wrote:
>>> Hi,
>>>
>>> I have already tried with backports 4.2.6 and different combinations
>>> of firmware.bin / board.bin. With differnt results, but none of them
>>> works. I will redo the tests and summarize them.
>>>
>>> Loading with irq_mode=1 gives me following result:
>>> [55416.824364] ath10k_pci 0000:01:00.0: limiting irq mode to: 1
>>> [55416.830102] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0
>>> irq_mode 1 reset_mode 0
>>> [55417.212048] ath10k_pci 0000:01:00.0: could not fetch firmware file
>>> 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
>>> [55424.394422] ath10k_pci 0000:01:00.0: wmi unified ready event not received
>>> [55424.436023] ath10k_pci 0000:01:00.0: firmware crashed! (uuid
>>> e082ac60-7c2d-4d14-9c49-fd5b0591c95c)
>>> [55424.445008] ath10k_pci 0000:01:00.0: qca6174 hw3.2 (0x05030000,
>>
>> Oh, wait.
>>
>> You have hw3.2? I haven't noticed that earlier.
>>
>> If memory serves right it needs a different board.bin (compared to
>> e.g. hw3.0). I'm not sure if it's available in Kalle's repository.
>> Wrong board.bin can cause firmware to hang or crash during init.
>
> Could you give a try to the board-2.bin file, which is sort of a
> container for the board bins, ath10k shall support.. and say if it
> solves your card problem?
>
> *) https://github.com/kvalo/ath10k-firmware/blob/master/QCA6174/hw3.0/board-2.bin
>
> --
> Bartosz
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
