Michal Kazior <michal.kazior@xxxxxxxxx> writes:
> On 22 April 2015 at 08:27, Kalle Valo <kvalo@xxxxxxxxxxxxxxxx> wrote:
>> Kalle Valo <kvalo@xxxxxxxxxxxxxxxx> writes:
>>
>>> Michal Kazior <michal.kazior@xxxxxxxxx> writes:
>>>
>>>>> To reduce support questions from the users it would be nice to give few
>>>>> good examples how to use this with iw. And also it makes it easier to
>>>>> test the patch. If you could send something I can add it to the commit
>>>>> log.
>>>>
>>>> Should work:
>>>>
>>>> iw wlan0 set bitrates legacy 1 6 12 ht-mcs 1 2 3
>>>> iw wlan0 set bitrates legacy-5 mcs-5 7 8 9
>
> Oh, I just noticed I typo'ed: s/mcs-5/ht-mcs-5/.
>
>
>>>> iw wlan0 set bitrates legacy-5 24 ht-mcs-5 vht-mcs-5 1:0-9
>>>>
>>>> Won't work:
>>>>
>>>> iw wlan0 set bitrates legacy-5 ht-mcs-5 vht-mcs-5 1:0-5
>>>> iw wlan0 set bitrates vht-mcs-5 2:7-9
>>>>
>>>> (note the invalid VHT MCS ranges)
>>>
>>> Thanks, I added these to the commit log.
>>
>> Actually, I had some problems:
>>
>> # iw wlan0 set bitrates legacy-2.4 1 6 12 ht-mcs-2.4 1 2 3
>> command failed: Invalid argument (-22)
>> # iw wlan0 set bitrates legacy-5 1 6 12 ht-mcs-5 1 2 3
>> command failed: Invalid argument (-22)
>
> There's no 1mbps (CCK) on 5GHz. If you remove the "1" from legacy-5 it
> should work.
I fixed the commit now to:
----------------------------------------------------------------------
These work:
iw wlan0 set bitrates legacy-5 6 12 ht-mcs-5 1 2 3
iw wlan0 set bitrates legacy-5 ht-mcs-5 7 8 9
iw wlan0 set bitrates legacy-5 24 ht-mcs-5 vht-mcs-5 1:0-9
These won't work:
iw wlan0 set bitrates legacy-5 ht-mcs-5 vht-mcs-5 1:0-5
iw wlan0 set bitrates vht-mcs-5 2:7-9
(note the invalid VHT MCS ranges)
----------------------------------------------------------------------
>> # iw wlan0 set bitrates legacy-5 vht-mcs-5 7 8 9
>> command failed: Invalid argument (-22)
>
> There's a couple of problems here:
>
> * The syntax for VHT MCS is different: vht-mcs-<2.4|5>
> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*
> You used syntax from HT MCS: ht-mcs-<2.4|5> <MCS index>*
> The correct way to express this would be:
> iw wlan0 set bitrates legacy-5 vht-mcs-5 1:7,8,9
> or
> iw wlan0 set bitrates legacy-5 vht-mcs-5 1:7-9
> assuming you wanted NSS=1 (VHT MCS don't imply NSS just like HT MCS do)
>
> * As per commit log you can't use just any VHT MCS; you're limited to
> none, 0-7, 0-8, 0-9. You can set a *single* VHT MCS as per
> 51ab1a0a09a8 ("ath10k: add set_bitrate_mask callback") though.
Thanks, I understand better now.
--
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
