Johannes Berg wrote:
> On Thu, 2013-01-31 at 11:46 +0200, Vladimir Kondratiev wrote:
>> Hi,
>>
>> Now wifi drivers reports per-station info using struct station_info;
>> and currently for the data counters it has:
>> u32 rx_bytes;
>> u32 tx_bytes;
>>
>> while for device-wide statistics one can use ndo_get_stats64() to fill
>> 64-bit counters in the struct rtnl_link_stats64, per-station statistics
>> are 32-bit.
>>
>> This becomes problematic with gigabit speeds now observed for .11ac and
>> .11ad - counters overflown every few seconds.
>>
>> I'd like to extend rx and tx byte counters to 64-bit.
>>
>> What is better - expand existing fields in struct station_info as:
>> u64 rx_bytes;
>> u64 tx_bytes;
>
> This.
>
>> or add ne ones like:
>> u64 rx_bytes64;
>> u64 tx_bytes64;
>
> I don't see a reason to do this.
>
>>
>> Then, I'll add
>> NL80211_STA_INFO_RX_BYTES64,
>> NL80211_STA_INFO_TX_BYTES64,
>> to the enum nl80211_sta_info
>>
>> Before doing patch, I'd like to hear comments.
>> Any consideration why is this not to be done or done differently?
>
> Sounds good to me.
>
> Two points:
>
> 1) You should provide the RX_TX_BYTES attributes, but I think only if
> the value fits into 32 bits. That way, we don't report invalid
> information.
>
> 2a) Need to be careful in downstream drivers/mac80211, they should also
> be converted to use 64-bit counters when gathering the data. Otherwise,
> userspace might assume the value is actually 64-bit, when it rolled over
> in mac80211.
>
> 2b) An alternative to converting all the non-mac80211 drivers and
> mac80211 would be to add new station info flags: STATION_INFO_TX_BYTES64
> and STATION_INFO_RX_BYTES64. You'd still fill the rx_bytes/tx_bytes
> values, but if the driver sets STATION_INFO_TX_BYTES you'd never use a
> 64-bit attribute in nl80211.
>
> I think 2a is preferable, but it'd be a bunch of work to make sure to
> catch all drivers, and some devices might not actually have 64-bit
> counters (if the data comes from firmware)? So 2b might be a better
> choice.
>
> johannes
>
So, it may be like the following, patch 1 expands counters and patch 2
uses this 64-bit counters for ath6kl - only easy to find driver with
64-bit counters.
Comments?
>From e08b764685cc8887b36f97e2f7957498dbc48b60 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>
Date: Fri, 1 Feb 2013 16:01:35 +0200
Subject: [PATCH 1/2] wireless: expand per-station byte counters to 64bit
In per-station statistics, present 32bit counters are too small
for practical purposes - with gigabit speeds, it get overlapped
every few seconds.
Expand counters in the struct station_info to be 64-bit.
Driver can still fill only 32-bit and indicate in @filled
only bits like STATION_INFO_[TR]X_BYTES; in case driver provides
full 64-bit counter, it should also set in @filled
bit STATION_INFO_[TR]RX_BYTES64
Netlink sends both 32-bit and 64-bit counters, if present, to not break
user space.
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>
---
include/net/cfg80211.h | 12 ++++++++----
include/uapi/linux/nl80211.h | 4 ++++
net/wireless/nl80211.c | 10 +++++++++-
3 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 36e076e..bcb6b70 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -672,8 +672,10 @@ struct station_parameters {
* @STATION_INFO_SIGNAL: @signal filled
* @STATION_INFO_TX_BITRATE: @txrate fields are filled
* (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs)
- * @STATION_INFO_RX_PACKETS: @rx_packets filled
- * @STATION_INFO_TX_PACKETS: @tx_packets filled
+ * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value
+ * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value
+ * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value
+ * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value
* @STATION_INFO_TX_RETRIES: @tx_retries filled
* @STATION_INFO_TX_FAILED: @tx_failed filled
* @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
@@ -714,6 +716,8 @@ enum station_info_flags {
STATION_INFO_LOCAL_PM = 1<<21,
STATION_INFO_PEER_PM = 1<<22,
STATION_INFO_NONPEER_PM = 1<<23,
+ STATION_INFO_RX_BYTES64 = 1<<24,
+ STATION_INFO_TX_BYTES64 = 1<<25,
};
/**
@@ -835,8 +839,8 @@ struct station_info {
u32 filled;
u32 connected_time;
u32 inactive_time;
- u32 rx_bytes;
- u32 tx_bytes;
+ u64 rx_bytes;
+ u64 tx_bytes;
u16 llid;
u16 plid;
u8 plink_state;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 5b7dbc1..5c7d54c 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1851,6 +1851,8 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
* @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
* @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
* @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
* @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
* containing info as possible, see &enum nl80211_rate_info
@@ -1903,6 +1905,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_LOCAL_PM,
NL80211_STA_INFO_PEER_PM,
NL80211_STA_INFO_NONPEER_PM,
+ NL80211_STA_INFO_RX_BYTES64,
+ NL80211_STA_INFO_TX_BYTES64,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index b5978ab..b3a9c8e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3059,10 +3059,18 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq,
goto nla_put_failure;
if ((sinfo->filled & STATION_INFO_RX_BYTES) &&
nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES,
- sinfo->rx_bytes))
+ (u32)sinfo->rx_bytes))
goto nla_put_failure;
if ((sinfo->filled & STATION_INFO_TX_BYTES) &&
nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES,
+ (u32)sinfo->tx_bytes))
+ goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_RX_BYTES64) &&
+ nla_put_u64(msg, NL80211_STA_INFO_RX_BYTES64,
+ sinfo->rx_bytes))
+ goto nla_put_failure;
+ if ((sinfo->filled & STATION_INFO_TX_BYTES64) &&
+ nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES64,
sinfo->tx_bytes))
goto nla_put_failure;
if ((sinfo->filled & STATION_INFO_LLID) &&
--
1.7.10.4
>From ec3c391673d70078008213d6243881919c977b07 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>
Date: Fri, 1 Feb 2013 16:03:34 +0200
Subject: [PATCH 2/2] ath6kl: provide 64-bit per-station byte counters
Internally, 64-bit byte counters maintained for per-station
statistics. Tell to the netlink that full 64-bit value provided
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 4225cca..90b1a93 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1778,14 +1778,16 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev,
if (vif->target_stats.rx_byte) {
sinfo->rx_bytes = vif->target_stats.rx_byte;
- sinfo->filled |= STATION_INFO_RX_BYTES;
+ sinfo->filled |= STATION_INFO_RX_BYTES |
+ STATION_INFO_RX_BYTES64;
sinfo->rx_packets = vif->target_stats.rx_pkt;
sinfo->filled |= STATION_INFO_RX_PACKETS;
}
if (vif->target_stats.tx_byte) {
sinfo->tx_bytes = vif->target_stats.tx_byte;
- sinfo->filled |= STATION_INFO_TX_BYTES;
+ sinfo->filled |= STATION_INFO_TX_BYTES |
+ STATION_INFO_TX_BYTES64;
sinfo->tx_packets = vif->target_stats.tx_pkt;
sinfo->filled |= STATION_INFO_TX_PACKETS;
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
