On Thursday, January 31, 2013 11:42:04 AM Johannes Berg wrote: > On Thu, 2013-01-31 at 11:46 +0200, Vladimir Kondratiev wrote: > > Hi, > > > > Now wifi drivers reports per-station info using struct station_info; > > and currently for the data counters it has: > > u32 rx_bytes; > > u32 tx_bytes; > > > > while for device-wide statistics one can use ndo_get_stats64() to fill > > 64-bit counters in the struct rtnl_link_stats64, per-station statistics > > are 32-bit. > > > > This becomes problematic with gigabit speeds now observed for .11ac and .11ad - > > counters overflown every few seconds. > > > > I'd like to extend rx and tx byte counters to 64-bit. > > > > What is better - expand existing fields in struct station_info as: > > u64 rx_bytes; > > u64 tx_bytes; > > This. > > > or add ne ones like: > > u64 rx_bytes64; > > u64 tx_bytes64; > > I don't see a reason to do this. > > > > > Then, I'll add > > NL80211_STA_INFO_RX_BYTES64, > > NL80211_STA_INFO_TX_BYTES64, > > to the enum nl80211_sta_info > > > > Before doing patch, I'd like to hear comments. > > Any consideration why is this not to be done or done differently? > > Sounds good to me. > > Two points: > > 1) You should provide the RX_TX_BYTES attributes, but I think only if > the value fits into 32 bits. That way, we don't report invalid > information. > > 2a) Need to be careful in downstream drivers/mac80211, they should also > be converted to use 64-bit counters when gathering the data. Otherwise, > userspace might assume the value is actually 64-bit, when it rolled over > in mac80211. > > 2b) An alternative to converting all the non-mac80211 drivers and > mac80211 would be to add new station info flags: STATION_INFO_TX_BYTES64 > and STATION_INFO_RX_BYTES64. You'd still fill the rx_bytes/tx_bytes > values, but if the driver sets STATION_INFO_TX_BYTES you'd never use a > 64-bit attribute in nl80211. > > I think 2a is preferable, but it'd be a bunch of work to make sure to > catch all drivers, and some devices might not actually have 64-bit > counters (if the data comes from firmware)? So 2b might be a better > choice. > > johannes > Patches follows. patch 1 expands counters and patch 2 uses this 64-bit counters for the ath6kl - only easy to find driver with 64-bit counters. >From e08b764685cc8887b36f97e2f7957498dbc48b60 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev <qca_vkondrat-A+ZNKFmMK5xy9aJCnZT0Uw@xxxxxxxxxxxxxxxx> Date: Fri, 1 Feb 2013 16:01:35 +0200 Subject: [PATCH 1/2] wireless: expand per-station byte counters to 64bit In per-station statistics, present 32bit counters are too small for practical purposes - with gigabit speeds, it get overlapped every few seconds. Expand counters in the struct station_info to be 64-bit. Driver can still fill only 32-bit and indicate in @filled only bits like STATION_INFO_[TR]X_BYTES; in case driver provides full 64-bit counter, it should also set in @filled bit STATION_INFO_[TR]RX_BYTES64 Netlink sends both 32-bit and 64-bit counters, if present, to not break user space. Signed-off-by: Vladimir Kondratiev <qca_vkondrat-A+ZNKFmMK5xy9aJCnZT0Uw@xxxxxxxxxxxxxxxx> --- include/net/cfg80211.h | 12 ++++++++---- include/uapi/linux/nl80211.h | 4 ++++ net/wireless/nl80211.c | 10 +++++++++- 3 files changed, 21 insertions(+), 5 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 36e076e..bcb6b70 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -672,8 +672,10 @@ struct station_parameters { * @STATION_INFO_SIGNAL: @signal filled * @STATION_INFO_TX_BITRATE: @txrate fields are filled * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) - * @STATION_INFO_RX_PACKETS: @rx_packets filled - * @STATION_INFO_TX_PACKETS: @tx_packets filled + * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value + * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value + * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value + * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -714,6 +716,8 @@ enum station_info_flags { STATION_INFO_LOCAL_PM = 1<<21, STATION_INFO_PEER_PM = 1<<22, STATION_INFO_NONPEER_PM = 1<<23, + STATION_INFO_RX_BYTES64 = 1<<24, + STATION_INFO_TX_BYTES64 = 1<<25, }; /** @@ -835,8 +839,8 @@ struct station_info { u32 filled; u32 connected_time; u32 inactive_time; - u32 rx_bytes; - u32 tx_bytes; + u64 rx_bytes; + u64 tx_bytes; u16 llid; u16 plid; u8 plink_state; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5b7dbc1..5c7d54c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1851,6 +1851,8 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) + * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) + * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute * containing info as possible, see &enum nl80211_rate_info @@ -1903,6 +1905,8 @@ enum nl80211_sta_info { NL80211_STA_INFO_LOCAL_PM, NL80211_STA_INFO_PEER_PM, NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b5978ab..b3a9c8e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3059,10 +3059,18 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, goto nla_put_failure; if ((sinfo->filled & STATION_INFO_RX_BYTES) && nla_put_u32(msg, NL80211_STA_INFO_RX_BYTES, - sinfo->rx_bytes)) + (u32)sinfo->rx_bytes)) goto nla_put_failure; if ((sinfo->filled & STATION_INFO_TX_BYTES) && nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, + (u32)sinfo->tx_bytes)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_RX_BYTES64) && + nla_put_u64(msg, NL80211_STA_INFO_RX_BYTES64, + sinfo->rx_bytes)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_TX_BYTES64) && + nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES64, sinfo->tx_bytes)) goto nla_put_failure; if ((sinfo->filled & STATION_INFO_LLID) && -- 1.7.10.4 >From ec3c391673d70078008213d6243881919c977b07 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev <qca_vkondrat-A+ZNKFmMK5xy9aJCnZT0Uw@xxxxxxxxxxxxxxxx> Date: Fri, 1 Feb 2013 16:03:34 +0200 Subject: [PATCH 2/2] ath6kl: provide 64-bit per-station byte counters Internally, 64-bit byte counters maintained for per-station statistics. Tell to the netlink that full 64-bit value provided Signed-off-by: Vladimir Kondratiev <qca_vkondrat-A+ZNKFmMK5xy9aJCnZT0Uw@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath6kl/cfg80211.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4225cca..90b1a93 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1778,14 +1778,16 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev, if (vif->target_stats.rx_byte) { sinfo->rx_bytes = vif->target_stats.rx_byte; - sinfo->filled |= STATION_INFO_RX_BYTES; + sinfo->filled |= STATION_INFO_RX_BYTES | + STATION_INFO_RX_BYTES64; sinfo->rx_packets = vif->target_stats.rx_pkt; sinfo->filled |= STATION_INFO_RX_PACKETS; } if (vif->target_stats.tx_byte) { sinfo->tx_bytes = vif->target_stats.tx_byte; - sinfo->filled |= STATION_INFO_TX_BYTES; + sinfo->filled |= STATION_INFO_TX_BYTES | + STATION_INFO_TX_BYTES64; sinfo->tx_packets = vif->target_stats.tx_pkt; sinfo->filled |= STATION_INFO_TX_PACKETS; } -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html