Re: problem with Roseweil eusb3 enclosure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:

> On Wed, Oct 24, 2012 at 12:52:18PM -0400, covici@xxxxxxxxxxxxxx wrote:
> > Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx> wrote:
> > 
> > > On Wed, Oct 24, 2012 at 11:13:51AM -0400, covici@xxxxxxxxxxxxxx wrote:
> > > > I cannot post dmesg output befcause it starts spewing messages before
> > > > any disk is mounted -- I have to shut down and reboot without the drive
> > > > plugged in.  But see a previous message where I posted some more
> > > > information in this thread.  But to answer your questions, the enclosure
> > > > has its own power and it does work with usb2 -- although I have not
> > > > booted with it plugged in in that state, so I will have to check.
> > > 
> > > So it does not get better if you unplugg the device later on? You could either
> > > try netconsole (Documentation/networking/netconsole.txt assuming you have
> > > already network) if this works or maybe even simpler, boot your own kernel and
> > > after you booted modprobe the xhci driver (and hope that it still behaves that
> > > way).
> > 
> > I will have to try that, but when this has happened in the past with
> > kernels like 3.4.0, unplugging and replugging the drive did not fix
> > anything.  I will have to see if the xhci module is in there at the
> > time.
> 
> I'm wondering if perhaps your device isn't responding to the Set Address
> control transfer, and the xHCI driver is getting stuck with the command
> on the command ring.  Can you try the latest kernel from Linus' tree?
> There's some command cancellation patches that went into 3.7 (that are
> marked for stable) that should fix that particular issue.

How do I get those kernels?  Can you give me the address and whatever
else I need to get those?

Thanks.

-- 
Your life is like a penny.  You're going to lose it.  The question is:
How do
you spend it?

         John Covici
         covici@xxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux