On Mon, Jul 02, 2012 at 05:42:53PM -0700, Gary E. Miller wrote: > Yo Sarah! > > On Mon, 2 Jul 2012 16:12:21 -0700 > Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote: > > > > > Can you send me the full dmesg with CONFIG_USB_XHCI_HCD_DEBUGGING > > > > turned on, and try to get it into a state where the hub stops > > > > communicating? > > > Sorry, you also need CONFIG_USB_DEBUG as well. > > Ding dong! > > That is a ton of output. > > This is plugging my USB headset into the USB 3.0 of my hub: > > http://bpaste.net/show/33196/ Are you able to run lsusb and see the USB headset, even though it doesn't enumerate properly? If so, please send me the output of `sudo lsusb -v -d 0d8c:0139`. I want to double check that the xHCI driver is setting up the command to add the configuration correctly. Can you send the dmesg with debugging enabled, starting from when you plug in the USB 3.0 hub as well? I also need the full lspci output for your system. I want to figure out if you have an EHCI host controller on board. Sarah Sharp -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
