Re: kernel 3.1 & SB700/SB800: No working usb devices

Tomi Orava <tomimo+linux-usb@xxxxxxxxxxxxxxxxxx> · Thu, 10 Nov 2011 13:52:29 +0200

Quoting Andiry Xu <andiry.xu@xxxxxxx>:

On 11/09/2011 05:59 AM, Tomi Orava wrote:

Quoting Andiry Xu <andiry.xu@xxxxxxx>:

On 11/08/2011 01:35 PM, Tomi Orava wrote:

Hi,

The USB 2.0 hub doesn't want to enumerate under EHCI.  -32 is -EPIPE,
which is a protocol error, maybe a stall?  In any case, it looks like
your hub is just not working.  Have you tried a different hub?  Or a
different cable to the hub?

I just wanted to verify that all the end devices are ok and working,
so I plugged the Cypress usb 2.0 hub & logitech web camera to
my lenovo laptop (standard log below) and everything is working just fine.
I'm currently using another logitech mouse via this hub.
Would it help to get more detailed usb debug log out of these devices
while connected to a host where they do work ?

Please try the patch attached, connect the hub to the USB2.0 ports on
your original board to see if it helps.

Here is the full kernel log with your & Sarah's patches applied.

You plugged to the xHCI ports. Please plug it to USB2(EHCI) ports.

Ups! Here is the proper log: http://ncircle.nullnet.fi/usb/usb.log
Its 800K, mostly due to xhci_hcd debug logs.

After the reboot, the only visible usb device is the mouse:

Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Regards,
Tomi Orava

Nov  8 23:05:54 knummi kernel: imklog 4.2.0, log source =  
/proc/kmsg started.
Nov  8 23:05:54 knummi kernel: [    0.000000] Initializing cgroup
subsys cpuset
Nov  8 23:05:54 knummi kernel: [    0.000000] Initializing cgroup subsys cpu
Nov  8 23:05:54 knummi kernel: [    0.000000] Linux version 3.1.0-tmo5
(root@tipoca) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1
SMP Tue Nov 8 22:39:46 EET 2011
Nov  8 23:05:54 knummi kernel: [    0.000000] Command line:
BOOT_IMAGE=/vmlinuz-3.1.0-tmo5
root=UUID=69fbf031-8b40-4167-860c-2024ab4f8ae9 ro
Nov  8 23:05:54 knummi kernel: [    0.000000] BIOS-provided  
physical RAM map:
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
0000000000000000 - 000000000009d800 (usable)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
000000000009d800 - 00000000000a0000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000000e0000 - 0000000000100000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
0000000000100000 - 00000000cd952000 (usable)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cd952000 - 00000000cd99f000 (ACPI NVS)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cd99f000 - 00000000cd9a8000 (ACPI data)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cd9a8000 - 00000000cdae0000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdae0000 - 00000000cdaf1000 (ACPI NVS)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdaf1000 - 00000000cdb04000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdb04000 - 00000000cdb06000 (ACPI NVS)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdb06000 - 00000000cdb0f000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdb0f000 - 00000000cdb15000 (ACPI NVS)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdb15000 - 00000000cdb77000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdb77000 - 00000000cdd7a000 (ACPI NVS)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000cdd7a000 - 00000000cdf00000 (usable)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000f8000000 - 00000000fc000000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fec00000 - 00000000fec01000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fec10000 - 00000000fec11000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fec20000 - 00000000fec21000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fed00000 - 00000000fed01000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fed61000 - 00000000fed71000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fed80000 - 00000000fed90000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
00000000fef00000 - 0000000100000000 (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000]  BIOS-e820:
0000000100001000 - 0000000230000000 (usable)
Nov  8 23:05:54 knummi kernel: [    0.000000] NX (Execute Disable)
protection: active
Nov  8 23:05:54 knummi kernel: [    0.000000] DMI 2.7 present.
Nov  8 23:05:54 knummi kernel: [    0.000000] DMI: To be filled by
O.E.M. To be filled by O.E.M./M5A97 PRO, BIOS 0810 09/29/2011
Nov  8 23:05:54 knummi kernel: [    0.000000] e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000] e820 remove range:
00000000000a0000 - 0000000000100000 (usable)
Nov  8 23:05:54 knummi kernel: [    0.000000] No AGP bridge found
Nov  8 23:05:54 knummi kernel: [    0.000000] last_pfn = 0x230000
max_arch_pfn = 0x400000000
Nov  8 23:05:54 knummi kernel: [    0.000000] MTRR default type: uncachable
Nov  8 23:05:54 knummi kernel: [    0.000000] MTRR fixed ranges enabled:
Nov  8 23:05:54 knummi kernel: [    0.000000]   00000-9FFFF write-back
Nov  8 23:05:54 knummi kernel: [    0.000000]   A0000-BFFFF write-through
Nov  8 23:05:54 knummi kernel: [    0.000000]   C0000-CDFFF write-protect
Nov  8 23:05:54 knummi kernel: [    0.000000]   CE000-EBFFF uncachable
Nov  8 23:05:54 knummi kernel: [    0.000000]   EC000-FFFFF write-protect
Nov  8 23:05:54 knummi kernel: [    0.000000] MTRR variable ranges enabled:
Nov  8 23:05:54 knummi kernel: [    0.000000]   0 base 000000000000
mask FFFF80000000 write-back
Nov  8 23:05:54 knummi kernel: [    0.000000]   1 base 000080000000
mask FFFFC0000000 write-back
Nov  8 23:05:54 knummi kernel: [    0.000000]   2 base 0000C0000000
mask FFFFF0000000 write-back
Nov  8 23:05:54 knummi kernel: [    0.000000]   3 base 0000CDF00000
mask FFFFFFF00000 uncachable
Nov  8 23:05:54 knummi kernel: [    0.000000]   4 base 0000CE000000
mask FFFFFE000000 uncachable
Nov  8 23:05:54 knummi kernel: [    0.000000]   5 disabled
Nov  8 23:05:54 knummi kernel: [    0.000000]   6 disabled
Nov  8 23:05:54 knummi kernel: [    0.000000]   7 disabled
Nov  8 23:05:54 knummi kernel: [    0.000000] TOM2:  
0000000230000000 aka 8960M
Nov  8 23:05:54 knummi kernel: [    0.000000] x86 PAT enabled: cpu 0,
old 0x7040600070406, new 0x7010600070106
Nov  8 23:05:54 knummi kernel: [    0.000000] e820 update range:
00000000cdf00000 - 0000000100000000 (usable) ==> (reserved)
Nov  8 23:05:54 knummi kernel: [    0.000000] last_pfn = 0xcdf00
max_arch_pfn = 0x400000000
Nov  8 23:05:54 knummi kernel: [    0.000000] initial memory mapped :
0 - 20000000
Nov  8 23:05:54 knummi kernel: [    0.000000] Base memory trampoline
at [ffff880000098000] 98000 size 20480
Nov  8 23:05:54 knummi kernel: [    0.000000] Using GB pages for
direct mapping
Nov  8 23:05:54 knummi kernel: [    0.000000] init_memory_mapping:
0000000000000000-00000000cdf00000
Nov  8 23:05:54 knummi kernel: [    0.000000]  0000000000 -  
00c0000000 page 1G
Nov  8 23:05:54 knummi kernel: [    0.000000]  00c0000000 -  
00cde00000 page 2M
Nov  8 23:05:54 knummi kernel: [    0.000000]  00cde00000 -  
00cdf00000 page 4k
Nov  8 23:05:54 knummi kernel: [    0.000000] kernel direct mapping
tables up to cdf00000 @ 1fffd000-20000000
Nov  8 23:05:54 knummi kernel: [    0.000000] init_memory_mapping:
0000000100000000-0000000230000000
Nov  8 23:05:54 knummi kernel: [    0.000000]  0100000000 -  
0200000000 page 1G
Nov  8 23:05:54 knummi kernel: [    0.000000]  0200000000 -  
0230000000 page 2M
Nov  8 23:05:54 knummi kernel: [    0.000000] kernel direct mapping
tables up to 230000000 @ cdefe000-cdf00000
Nov  8 23:05:54 knummi kernel: [    0.000000] RAMDISK: 3752f000 - 37ff0000
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: RSDP
00000000000f0450 00024 (v02 ALASKA)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: XSDT
00000000cd99f068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: FACP
00000000cd9a6df0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI Warning: Optional
field Pm2ControlBlock has zero address or length:
0x0000000000000000/0x1 (20110623/tbfadt-560)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: DSDT
00000000cd99f140 07CA9 (v02 ALASKA    A M I 00000000 INTL 20051117)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: FACS
00000000cdb0ff80 00040
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: APIC
00000000cd9a6ee8 0009E (v03 ALASKA    A M I 01072009 AMI  00010013)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: MCFG
00000000cd9a6f88 0003C (v01 ALASKA    A M I 01072009 MSFT 00010013)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: HPET
00000000cd9a6fc8 00038 (v01 ALASKA    A M I 01072009 AMI  00000004)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: SSDT
00000000cd9a7000 008BC (v01 AMD    POWERNOW 00000001 AMD  00000001)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: Local APIC address
0xfee00000
Nov  8 23:05:54 knummi kernel: [    0.000000] Scanning NUMA topology
in Northbridge 24
Nov  8 23:05:54 knummi kernel: [    0.000000] No NUMA configuration found
Nov  8 23:05:54 knummi kernel: [    0.000000] Faking a node at
0000000000000000-0000000230000000
Nov  8 23:05:54 knummi kernel: [    0.000000] Initmem setup node 0
0000000000000000-0000000230000000
Nov  8 23:05:54 knummi kernel: [    0.000000]   NODE_DATA
[000000022fffb000 - 000000022fffffff]
Nov  8 23:05:54 knummi kernel: [    0.000000]
[ffffea0000000000-ffffea0008bfffff] PMD ->
[ffff880227600000-ffff88022f5fffff] on node 0
Nov  8 23:05:54 knummi kernel: [    0.000000] Zone PFN ranges:
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA      0x00000010 ->
0x00001000
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA32    0x00001000 ->
0x00100000
Nov  8 23:05:54 knummi kernel: [    0.000000]   Normal   0x00100000 ->
0x00230000
Nov  8 23:05:54 knummi kernel: [    0.000000] Movable zone start PFN
for each node
Nov  8 23:05:54 knummi kernel: [    0.000000] early_node_map[4] active
PFN ranges
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x00000010 ->  
0x0000009d
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x00000100 ->  
0x000cd952
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x000cdd7a ->  
0x000cdf00
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x00100001 ->  
0x00230000
Nov  8 23:05:54 knummi kernel: [    0.000000] On node 0 totalpages: 2087524
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA zone: 64 pages
used for memmap
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA zone: 5 pages reserved
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA zone: 3912 pages,
LIFO batch:0
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA32 zone: 16320
pages used for memmap
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA32 zone: 822040
pages, LIFO batch:31
Nov  8 23:05:54 knummi kernel: [    0.000000]   Normal zone: 19456
pages used for memmap
Nov  8 23:05:54 knummi kernel: [    0.000000]   Normal zone: 1225727
pages, LIFO batch:31
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: Local APIC address
0xfee00000
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x01] lapic_id[0x00] enabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x02] lapic_id[0x01] enabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x03] lapic_id[0x02] enabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x04] lapic_id[0x03] enabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x05] lapic_id[0x05] disabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x06] lapic_id[0x06] disabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x07] lapic_id[0x07] disabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC
(acpi_id[0x08] lapic_id[0x08] disabled)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: LAPIC_NMI
(acpi_id[0xff] high edge lint[0x1])
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IOAPIC (id[0x05]
address[0xfec00000] gsi_base[0])
Nov  8 23:05:54 knummi kernel: [    0.000000] IOAPIC[0]: apic_id 5,
version 33, address 0xfec00000, GSI 0-23
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IOAPIC (id[0x06]
address[0xfec20000] gsi_base[24])
Nov  8 23:05:54 knummi kernel: [    0.000000] IOAPIC[1]: apic_id 6,
version 33, address 0xfec20000, GSI 24-55
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 0 global_irq 2 dfl dfl)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0
bus_irq 9 global_irq 9 low level)
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IRQ0 used by override.
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IRQ2 used by override.
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IRQ9 used by override.
Nov  8 23:05:54 knummi kernel: [    0.000000] Using ACPI (MADT) for
SMP configuration information
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: HPET id:
0xffffffff base: 0xfed00000
Nov  8 23:05:54 knummi kernel: [    0.000000] SMP: Allowing 8 CPUs, 4
hotplug CPUs
Nov  8 23:05:54 knummi kernel: [    0.000000] nr_irqs_gsi: 72
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 000000000009d000 - 000000000009e000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 000000000009e000 - 00000000000a0000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000000a0000 - 00000000000e0000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000000e0000 - 0000000000100000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cd952000 - 00000000cd99f000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cd99f000 - 00000000cd9a8000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cd9a8000 - 00000000cdae0000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdae0000 - 00000000cdaf1000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdaf1000 - 00000000cdb04000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdb04000 - 00000000cdb06000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdb06000 - 00000000cdb0f000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdb0f000 - 00000000cdb15000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdb15000 - 00000000cdb77000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdb77000 - 00000000cdd7a000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000cdf00000 - 00000000f8000000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000f8000000 - 00000000fc000000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fc000000 - 00000000fec00000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fec00000 - 00000000fec01000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fec01000 - 00000000fec10000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fec10000 - 00000000fec11000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fec11000 - 00000000fec20000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fec20000 - 00000000fec21000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fec21000 - 00000000fed00000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fed00000 - 00000000fed01000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fed01000 - 00000000fed61000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fed61000 - 00000000fed71000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fed71000 - 00000000fed80000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fed80000 - 00000000fed90000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fed90000 - 00000000fef00000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 00000000fef00000 - 0000000100000000
Nov  8 23:05:54 knummi kernel: [    0.000000] PM: Registered nosave
memory: 0000000100000000 - 0000000100001000
Nov  8 23:05:54 knummi kernel: [    0.000000] Allocating PCI resources
starting at cdf00000 (gap: cdf00000:2a100000)
Nov  8 23:05:54 knummi kernel: [    0.000000] Booting paravirtualized
kernel on bare hardware
Nov  8 23:05:54 knummi kernel: [    0.000000] setup_percpu:
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
Nov  8 23:05:54 knummi kernel: [    0.000000] PERCPU: Embedded 27
pages/cpu @ffff88022fc00000 s81152 r8192 d21248 u262144
Nov  8 23:05:54 knummi kernel: [    0.000000] pcpu-alloc: s81152 r8192
d21248 u262144 alloc=1*2097152
Nov  8 23:05:54 knummi kernel: [    0.000000] pcpu-alloc: [0] 0 1 2  
3 4 5 6 7
Nov  8 23:05:54 knummi kernel: [    0.000000] Built 1 zonelists in
Zone order, mobility grouping on.  Total pages: 2051679
Nov  8 23:05:54 knummi kernel: [    0.000000] Policy zone: Normal
Nov  8 23:05:54 knummi kernel: [    0.000000] Kernel command line:
BOOT_IMAGE=/vmlinuz-3.1.0-tmo5
root=UUID=69fbf031-8b40-4167-860c-2024ab4f8ae9 ro
Nov  8 23:05:54 knummi kernel: [    0.000000] PID hash table entries:
4096 (order: 3, 32768 bytes)
Nov  8 23:05:54 knummi kernel: [    0.000000] Checking aperture...
Nov  8 23:05:54 knummi kernel: [    0.000000] No AGP bridge found
Nov  8 23:05:54 knummi kernel: [    0.000000] Node 0: aperture @
f8000000 size 64 MB
Nov  8 23:05:54 knummi kernel: [    0.000000] Memory:
8127572k/9175040k available (5772k kernel code, 824944k absent,
222524k reserved, 5213k data, 952k init)
Nov  8 23:05:54 knummi kernel: [    0.000000] SLUB: Genslabs=15,
HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Nov  8 23:05:54 knummi kernel: [    0.000000] Hierarchical RCU  
implementation.
Nov  8 23:05:54 knummi kernel: [    0.000000] 	RCU dyntick-idle
grace-period acceleration is enabled.
Nov  8 23:05:54 knummi kernel: [    0.000000] NR_IRQS:16640 nr_irqs:1288 16
Nov  8 23:05:54 knummi kernel: [    0.000000] Extended CMOS year: 2000
Nov  8 23:05:54 knummi kernel: [    0.000000] spurious 8259A  
interrupt: IRQ7.
Nov  8 23:05:54 knummi kernel: [    0.000000] Console: colour VGA+ 80x25
Nov  8 23:05:54 knummi kernel: [    0.000000] console [tty0] enabled
Nov  8 23:05:54 knummi kernel: [    0.000000] allocated 67108864 bytes
of page_cgroup
Nov  8 23:05:54 knummi kernel: [    0.000000] please try
'cgroup_disable=memory' option if you don't want memory cgroups
Nov  8 23:05:54 knummi kernel: [    0.000000] hpet clockevent registered
Nov  8 23:05:54 knummi kernel: [    0.000000] Fast TSC calibration using PIT
Nov  8 23:05:54 knummi kernel: [    0.000000] Detected 3411.228 MHz  
processor.
Nov  8 23:05:54 knummi kernel: [    0.001003] Calibrating delay loop
(skipped), value calculated using timer frequency.. 6822.45 BogoMIPS
(lpj=3411228)
Nov  8 23:05:54 knummi kernel: [    0.001124] pid_max: default: 32768
minimum: 301
Nov  8 23:05:54 knummi kernel: [    0.001203] Security Framework initialized
Nov  8 23:05:54 knummi kernel: [    0.001269] AppArmor: AppArmor initialized
Nov  8 23:05:54 knummi kernel: [    0.002374] Dentry cache hash table
entries: 1048576 (order: 11, 8388608 bytes)
Nov  8 23:05:54 knummi kernel: [    0.004459] Inode-cache hash table
entries: 524288 (order: 10, 4194304 bytes)
Nov  8 23:05:54 knummi kernel: [    0.005408] Mount-cache hash table
entries: 256
Nov  8 23:05:54 knummi kernel: [    0.005567] Initializing cgroup
subsys cpuacct
Nov  8 23:05:54 knummi kernel: [    0.005628] Initializing cgroup
subsys memory
Nov  8 23:05:54 knummi kernel: [    0.005692] Initializing cgroup
subsys devices
Nov  8 23:05:54 knummi kernel: [    0.005751] Initializing cgroup
subsys freezer
Nov  8 23:05:54 knummi kernel: [    0.005810] Initializing cgroup
subsys net_cls
Nov  8 23:05:54 knummi kernel: [    0.005887] tseg: 00cdf00000
Nov  8 23:05:54 knummi kernel: [    0.005889] CPU: Physical Processor ID: 0
Nov  8 23:05:54 knummi kernel: [    0.005947] CPU: Processor Core ID: 0
Nov  8 23:05:54 knummi kernel: [    0.006002] mce: CPU supports 6 MCE banks
Nov  8 23:05:54 knummi kernel: [    0.006065] using AMD E400 aware
idle routine
Nov  8 23:05:54 knummi kernel: [    0.007355] ACPI: Core revision 20110623
Nov  8 23:05:54 knummi kernel: [    0.010011] ftrace: allocating 21951
entries in 87 pages
Nov  8 23:05:54 knummi kernel: [    0.011334] ..TIMER: vector=0x30
apic1=0 pin1=2 apic2=-1 pin2=-1
Nov  8 23:05:54 knummi kernel: [    0.021960] CPU0: AMD Phenom(tm) II
X4 965 Processor stepping 03
Nov  8 23:05:54 knummi kernel: [    0.022998] Performance Events: AMD
PMU driver.
Nov  8 23:05:54 knummi kernel: [    0.022998] ... version:                0
Nov  8 23:05:54 knummi kernel: [    0.022998] ... bit width:              48
Nov  8 23:05:54 knummi kernel: [    0.022998] ... generic registers:      4
Nov  8 23:05:54 knummi kernel: [    0.022998] ... value mask:
    0000ffffffffffff
Nov  8 23:05:54 knummi kernel: [    0.022998] ... max period:
    00007fffffffffff
Nov  8 23:05:54 knummi kernel: [    0.022998] ... fixed-purpose events:   0
Nov  8 23:05:54 knummi kernel: [    0.022998] ... event mask:
    000000000000000f
Nov  8 23:05:54 knummi kernel: [    0.022998] Booting Node   0,  
Processors  #1
Nov  8 23:05:54 knummi kernel: [    0.022998] smpboot cpu 1:  
start_ip = 98000
Nov  8 23:05:54 knummi kernel: [    0.094002] System has AMD C1E enabled
Nov  8 23:05:54 knummi kernel: [    0.094037]  #2
Nov  8 23:05:54 knummi kernel: [    0.094038] smpboot cpu 2:  
start_ip = 98000
Nov  8 23:05:54 knummi kernel: [    0.094123] Switch to broadcast  
mode on CPU1
Nov  8 23:05:54 knummi kernel: [    0.165995] Switch to broadcast  
mode on CPU2
Nov  8 23:05:54 knummi kernel: [    0.166033]  #3
Nov  8 23:05:54 knummi kernel: [    0.166034] smpboot cpu 3:  
start_ip = 98000
Nov  8 23:05:54 knummi kernel: [    0.237986] Brought up 4 CPUs
Nov  8 23:05:54 knummi kernel: [    0.237985] Switch to broadcast  
mode on CPU3
Nov  8 23:05:54 knummi kernel: [    0.238102] Total of 4 processors
activated (27290.84 BogoMIPS).
Nov  8 23:05:54 knummi kernel: [    0.239064] Switch to broadcast  
mode on CPU0
Nov  8 23:05:54 knummi kernel: [    0.239064] devtmpfs: initialized
Nov  8 23:05:54 knummi kernel: [    0.239108] PM: Registering ACPI NVS
region at cd952000 (315392 bytes)
Nov  8 23:05:54 knummi kernel: [    0.239108] PM: Registering ACPI NVS
region at cdae0000 (69632 bytes)
Nov  8 23:05:54 knummi kernel: [    0.239108] PM: Registering ACPI NVS
region at cdb04000 (8192 bytes)
Nov  8 23:05:54 knummi kernel: [    0.239168] PM: Registering ACPI NVS
region at cdb0f000 (24576 bytes)
Nov  8 23:05:54 knummi kernel: [    0.239234] PM: Registering ACPI NVS
region at cdb77000 (2109440 bytes)
Nov  8 23:05:54 knummi kernel: [    0.240557] print_constraints: dummy:
Nov  8 23:05:54 knummi kernel: [    0.240632] RTC time: 21:05:41,
date: 11/08/11
Nov  8 23:05:54 knummi kernel: [    0.240716] NET: Registered protocol
family 16
Nov  8 23:05:54 knummi kernel: [    0.241026] node 0 link 0: io port
[b000, ffff]
Nov  8 23:05:54 knummi kernel: [    0.241028] TOM: 00000000d0000000  
aka 3328M
Nov  8 23:05:54 knummi kernel: [    0.241086] Fam 10h mmconf
[e0000000, efffffff]
Nov  8 23:05:54 knummi kernel: [    0.241088] node 0 link 0: mmio
[d0000000, fef0ffff] ==> [d0000000, dfffffff] and [f0000000, fef0ffff]
Nov  8 23:05:54 knummi kernel: [    0.241092] TOM2:  
0000000230000000 aka 8960M
Nov  8 23:05:54 knummi kernel: [    0.241150] bus: [00, 1f] on node 0 link 0
Nov  8 23:05:54 knummi kernel: [    0.241152] bus: 00 index 0 [io
0x0000-0xffff]
Nov  8 23:05:54 knummi kernel: [    0.241153] bus: 00 index 1 [mem
0xd0000000-0xdfffffff]
Nov  8 23:05:54 knummi kernel: [    0.241155] bus: 00 index 2 [mem
0xf0000000-0xffffffff]
Nov  8 23:05:54 knummi kernel: [    0.241156] bus: 00 index 3 [mem
0x230000000-0xfcffffffff]
Nov  8 23:05:54 knummi kernel: [    0.241163] Extended Config Space
enabled on 1 nodes
Nov  8 23:05:54 knummi kernel: [    0.241236] ACPI: bus type pci registered
Nov  8 23:05:54 knummi kernel: [    0.241328] PCI: MMCONFIG for domain
0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov  8 23:05:54 knummi kernel: [    0.241409] PCI: not using MMCONFIG
Nov  8 23:05:54 knummi kernel: [    0.241466] PCI: Using configuration
type 1 for base access
Nov  8 23:05:54 knummi kernel: [    0.241526] PCI: Using configuration
type 1 for extended access
Nov  8 23:05:54 knummi kernel: [    0.242054] bio: create slab <bio-0> at 0
Nov  8 23:05:54 knummi kernel: [    0.242056] ACPI: Added  
_OSI(Module Device)
Nov  8 23:05:54 knummi kernel: [    0.242056] ACPI: Added
_OSI(Processor Device)
Nov  8 23:05:54 knummi kernel: [    0.242111] ACPI: Added _OSI(3.0
_SCP Extensions)
Nov  8 23:05:54 knummi kernel: [    0.242169] ACPI: Added
_OSI(Processor Aggregator Device)
Nov  8 23:05:54 knummi kernel: [    0.243105] ACPI: EC: Look up EC in DSDT
Nov  8 23:05:54 knummi kernel: [    0.243739] ACPI: Executed 2 blocks
of module-level executable AML code
Nov  8 23:05:54 knummi kernel: [    0.249074] ACPI Error: [RAMB]
Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
Nov  8 23:05:54 knummi kernel: [    0.249267] ACPI Exception:
AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region)
(20110623/nsinit-349)
Nov  8 23:05:54 knummi kernel: [    0.249688] ACPI: Interpreter enabled
Nov  8 23:05:54 knummi kernel: [    0.249747] ACPI: (supports S0 S1  
S3 S4 S5)
Nov  8 23:05:54 knummi kernel: [    0.250025] ACPI: Using IOAPIC for
interrupt routing
Nov  8 23:05:54 knummi kernel: [    0.250173] PCI: MMCONFIG for domain
0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Nov  8 23:05:54 knummi kernel: [    0.250276] PCI: MMCONFIG at [mem
0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Nov  8 23:05:54 knummi kernel: [    0.277589] ACPI: EC: GPE = 0xa,
I/O: command/status = 0x66, data = 0x62
Nov  8 23:05:54 knummi kernel: [    0.277747] ACPI: No dock devices found.
Nov  8 23:05:54 knummi kernel: [    0.277805] HEST: Table not found.
Nov  8 23:05:54 knummi kernel: [    0.277863] PCI: Using host bridge
windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov  8 23:05:54 knummi kernel: [    0.278053] ACPI: PCI Root Bridge
[PCI0] (domain 0000 [bus 00-ff])
Nov  8 23:05:54 knummi kernel: [    0.278255] pci_root PNP0A03:00:
host bridge window [io  0x0000-0x03af]
Nov  8 23:05:54 knummi kernel: [    0.278318] pci_root PNP0A03:00:
host bridge window [io  0x03e0-0x0cf7]
Nov  8 23:05:54 knummi kernel: [    0.278381] pci_root PNP0A03:00:
host bridge window [io  0x03b0-0x03df]
Nov  8 23:05:54 knummi kernel: [    0.278443] pci_root PNP0A03:00:
host bridge window [io  0x0d00-0xffff]
Nov  8 23:05:54 knummi kernel: [    0.278506] pci_root PNP0A03:00:
host bridge window [mem 0x000a0000-0x000bffff]
Nov  8 23:05:54 knummi kernel: [    0.278583] pci_root PNP0A03:00:
host bridge window [mem 0x000c0000-0x000dffff]
Nov  8 23:05:54 knummi kernel: [    0.278661] pci_root PNP0A03:00:
host bridge window [mem 0xd0000000-0xffffffff]
Nov  8 23:05:54 knummi kernel: [    0.278749] pci 0000:00:00.0:
[1002:5a14] type 0 class 0x000600
Nov  8 23:05:54 knummi kernel: [    0.278792] pci 0000:00:02.0:
[1002:5a16] type 1 class 0x000604
Nov  8 23:05:54 knummi kernel: [    0.278813] pci 0000:00:02.0: PME#
supported from D0 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.278815] pci 0000:00:02.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.278827] pci 0000:00:04.0:
[1002:5a18] type 1 class 0x000604
Nov  8 23:05:54 knummi kernel: [    0.278847] pci 0000:00:04.0: PME#
supported from D0 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.278849] pci 0000:00:04.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.278860] pci 0000:00:06.0:
[1002:5a1a] type 1 class 0x000604
Nov  8 23:05:54 knummi kernel: [    0.278880] pci 0000:00:06.0: PME#
supported from D0 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.278882] pci 0000:00:06.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.278892] pci 0000:00:07.0:
[1002:5a1b] type 1 class 0x000604
Nov  8 23:05:54 knummi kernel: [    0.278911] pci 0000:00:07.0: PME#
supported from D0 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.278914] pci 0000:00:07.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.278925] pci 0000:00:0a.0:
[1002:5a1d] type 1 class 0x000604
Nov  8 23:05:54 knummi kernel: [    0.278945] pci 0000:00:0a.0: PME#
supported from D0 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.278947] pci 0000:00:0a.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.278979] pci 0000:00:11.0:
[1002:4391] type 0 class 0x000106
Nov  8 23:05:54 knummi kernel: [    0.278993] pci 0000:00:11.0: reg
10: [io  0xf040-0xf047]
Nov  8 23:05:54 knummi kernel: [    0.279000] pci 0000:00:11.0: reg
14: [io  0xf030-0xf033]
Nov  8 23:05:54 knummi kernel: [    0.279006] pci 0000:00:11.0: reg
18: [io  0xf020-0xf027]
Nov  8 23:05:54 knummi kernel: [    0.279013] pci 0000:00:11.0: reg
1c: [io  0xf010-0xf013]
Nov  8 23:05:54 knummi kernel: [    0.279020] pci 0000:00:11.0: reg
20: [io  0xf000-0xf00f]
Nov  8 23:05:54 knummi kernel: [    0.279027] pci 0000:00:11.0: reg
24: [mem 0xfe50b000-0xfe50b3ff]
Nov  8 23:05:54 knummi kernel: [    0.279060] pci 0000:00:12.0:
[1002:4397] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279070] pci 0000:00:12.0: reg
10: [mem 0xfe50a000-0xfe50afff]
Nov  8 23:05:54 knummi kernel: [    0.279120] pci 0000:00:12.2:
[1002:4396] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279134] pci 0000:00:12.2: reg
10: [mem 0xfe509000-0xfe5090ff]
Nov  8 23:05:54 knummi kernel: [    0.279182] pci 0000:00:12.2:  
supports D1 D2
Nov  8 23:05:54 knummi kernel: [    0.279184] pci 0000:00:12.2: PME#
supported from D0 D1 D2 D3hot
Nov  8 23:05:54 knummi kernel: [    0.279187] pci 0000:00:12.2:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.279202] pci 0000:00:13.0:
[1002:4397] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279211] pci 0000:00:13.0: reg
10: [mem 0xfe508000-0xfe508fff]
Nov  8 23:05:54 knummi kernel: [    0.279260] pci 0000:00:13.2:
[1002:4396] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279274] pci 0000:00:13.2: reg
10: [mem 0xfe507000-0xfe5070ff]
Nov  8 23:05:54 knummi kernel: [    0.279322] pci 0000:00:13.2:  
supports D1 D2
Nov  8 23:05:54 knummi kernel: [    0.279324] pci 0000:00:13.2: PME#
supported from D0 D1 D2 D3hot
Nov  8 23:05:54 knummi kernel: [    0.279327] pci 0000:00:13.2:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.279341] pci 0000:00:14.0:
[1002:4385] type 0 class 0x000c05
Nov  8 23:05:54 knummi kernel: [    0.279394] pci 0000:00:14.2:
[1002:4383] type 0 class 0x000403
Nov  8 23:05:54 knummi kernel: [    0.279410] pci 0000:00:14.2: reg
10: [mem 0xfe500000-0xfe503fff 64bit]
Nov  8 23:05:54 knummi kernel: [    0.279450] pci 0000:00:14.2: PME#
supported from D0 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.279453] pci 0000:00:14.2:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.279462] pci 0000:00:14.3:
[1002:439d] type 0 class 0x000601
Nov  8 23:05:54 knummi kernel: [    0.279515] pci 0000:00:14.4:
[1002:4384] type 1 class 0x000604
Nov  8 23:05:54 knummi kernel: [    0.279543] pci 0000:00:14.5:
[1002:4399] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279552] pci 0000:00:14.5: reg
10: [mem 0xfe506000-0xfe506fff]
Nov  8 23:05:54 knummi kernel: [    0.279600] pci 0000:00:16.0:
[1002:4397] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279609] pci 0000:00:16.0: reg
10: [mem 0xfe505000-0xfe505fff]
Nov  8 23:05:54 knummi kernel: [    0.279658] pci 0000:00:16.2:
[1002:4396] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.279672] pci 0000:00:16.2: reg
10: [mem 0xfe504000-0xfe5040ff]
Nov  8 23:05:54 knummi kernel: [    0.279720] pci 0000:00:16.2:  
supports D1 D2
Nov  8 23:05:54 knummi kernel: [    0.279722] pci 0000:00:16.2: PME#
supported from D0 D1 D2 D3hot
Nov  8 23:05:54 knummi kernel: [    0.279725] pci 0000:00:16.2:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.279738] pci 0000:00:18.0:
[1022:1200] type 0 class 0x000600
Nov  8 23:05:54 knummi kernel: [    0.279750] pci 0000:00:18.1:
[1022:1201] type 0 class 0x000600
Nov  8 23:05:54 knummi kernel: [    0.279759] pci 0000:00:18.2:
[1022:1202] type 0 class 0x000600
Nov  8 23:05:54 knummi kernel: [    0.279769] pci 0000:00:18.3:
[1022:1203] type 0 class 0x000600
Nov  8 23:05:54 knummi kernel: [    0.279781] pci 0000:00:18.4:
[1022:1204] type 0 class 0x000600
Nov  8 23:05:54 knummi kernel: [    0.279821] pci 0000:01:00.0:
[10de:0de1] type 0 class 0x000300
Nov  8 23:05:54 knummi kernel: [    0.279829] pci 0000:01:00.0: reg
10: [mem 0xfd000000-0xfdffffff]
Nov  8 23:05:54 knummi kernel: [    0.279838] pci 0000:01:00.0: reg
14: [mem 0xd0000000-0xd7ffffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.279847] pci 0000:01:00.0: reg
1c: [mem 0xd8000000-0xd9ffffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.279853] pci 0000:01:00.0: reg
24: [io  0xe000-0xe07f]
Nov  8 23:05:54 knummi kernel: [    0.279859] pci 0000:01:00.0: reg
30: [mem 0xfe000000-0xfe07ffff pref]
Nov  8 23:05:54 knummi kernel: [    0.279896] pci 0000:01:00.1:
[10de:0bea] type 0 class 0x000403
Nov  8 23:05:54 knummi kernel: [    0.279904] pci 0000:01:00.1: reg
10: [mem 0xfe080000-0xfe083fff]
Nov  8 23:05:54 knummi kernel: [    0.281983] pci 0000:00:02.0: PCI
bridge to [bus 01-01]
Nov  8 23:05:54 knummi kernel: [    0.282046] pci 0000:00:02.0:
bridge window [io  0xe000-0xefff]
Nov  8 23:05:54 knummi kernel: [    0.282049] pci 0000:00:02.0:
bridge window [mem 0xfd000000-0xfe0fffff]
Nov  8 23:05:54 knummi kernel: [    0.282052] pci 0000:00:02.0:
bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.282085] pci 0000:02:00.0:
[10ec:8168] type 0 class 0x000200
Nov  8 23:05:54 knummi kernel: [    0.282097] pci 0000:02:00.0: reg
10: [io  0xd000-0xd0ff]
Nov  8 23:05:54 knummi kernel: [    0.282115] pci 0000:02:00.0: reg
18: [mem 0xda104000-0xda104fff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.282127] pci 0000:02:00.0: reg
20: [mem 0xda100000-0xda103fff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.282160] pci 0000:02:00.0:  
supports D1 D2
Nov  8 23:05:54 knummi kernel: [    0.282162] pci 0000:02:00.0: PME#
supported from D0 D1 D2 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.282165] pci 0000:02:00.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.283982] pci 0000:00:04.0: PCI
bridge to [bus 02-02]
Nov  8 23:05:54 knummi kernel: [    0.284045] pci 0000:00:04.0:
bridge window [io  0xd000-0xdfff]
Nov  8 23:05:54 knummi kernel: [    0.284048] pci 0000:00:04.0:
bridge window [mem 0xda100000-0xda1fffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.284085] pci 0000:03:00.0:
[197b:2362] type 0 class 0x000101
Nov  8 23:05:54 knummi kernel: [    0.284107] pci 0000:03:00.0: reg
10: [io  0xc040-0xc047]
Nov  8 23:05:54 knummi kernel: [    0.284116] pci 0000:03:00.0: reg
14: [io  0xc030-0xc033]
Nov  8 23:05:54 knummi kernel: [    0.284126] pci 0000:03:00.0: reg
18: [io  0xc020-0xc027]
Nov  8 23:05:54 knummi kernel: [    0.284135] pci 0000:03:00.0: reg
1c: [io  0xc010-0xc013]
Nov  8 23:05:54 knummi kernel: [    0.284145] pci 0000:03:00.0: reg
20: [io  0xc000-0xc00f]
Nov  8 23:05:54 knummi kernel: [    0.284155] pci 0000:03:00.0: reg
24: [mem 0xfe410000-0xfe4101ff]
Nov  8 23:05:54 knummi kernel: [    0.284164] pci 0000:03:00.0: reg
30: [mem 0x00000000-0x0000ffff pref]
Nov  8 23:05:54 knummi kernel: [    0.284189] pci 0000:03:00.0: PME#
supported from D3hot
Nov  8 23:05:54 knummi kernel: [    0.284192] pci 0000:03:00.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.285982] pci 0000:00:06.0: PCI
bridge to [bus 03-03]
Nov  8 23:05:54 knummi kernel: [    0.286044] pci 0000:00:06.0:
bridge window [io  0xc000-0xcfff]
Nov  8 23:05:54 knummi kernel: [    0.286047] pci 0000:00:06.0:
bridge window [mem 0xfe400000-0xfe4fffff]
Nov  8 23:05:54 knummi kernel: [    0.286084] pci 0000:04:00.0:
[1b21:1042] type 0 class 0x000c03
Nov  8 23:05:54 knummi kernel: [    0.286100] pci 0000:04:00.0: reg
10: [mem 0xfe300000-0xfe307fff 64bit]
Nov  8 23:05:54 knummi kernel: [    0.286170] pci 0000:04:00.0: PME#
supported from D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.286173] pci 0000:04:00.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.287981] pci 0000:00:07.0: PCI
bridge to [bus 04-04]
Nov  8 23:05:54 knummi kernel: [    0.288044] pci 0000:00:07.0:
bridge window [mem 0xfe300000-0xfe3fffff]
Nov  8 23:05:54 knummi kernel: [    0.288082] pci 0000:05:00.0:
[10ec:8168] type 0 class 0x000200
Nov  8 23:05:54 knummi kernel: [    0.288095] pci 0000:05:00.0: reg
10: [io  0xb000-0xb0ff]
Nov  8 23:05:54 knummi kernel: [    0.288117] pci 0000:05:00.0: reg
18: [mem 0xfe200000-0xfe200fff 64bit]
Nov  8 23:05:54 knummi kernel: [    0.288142] pci 0000:05:00.0: reg
30: [mem 0xfffe0000-0xffffffff pref]
Nov  8 23:05:54 knummi kernel: [    0.288175] pci 0000:05:00.0:  
supports D1 D2
Nov  8 23:05:54 knummi kernel: [    0.288177] pci 0000:05:00.0: PME#
supported from D1 D2 D3hot D3cold
Nov  8 23:05:54 knummi kernel: [    0.288180] pci 0000:05:00.0:  
PME# disabled
Nov  8 23:05:54 knummi kernel: [    0.288197] pci 0000:05:00.0:
disabling ASPM on pre-1.1 PCIe device.  You can enable it with
'pcie_aspm=force'
Nov  8 23:05:54 knummi kernel: [    0.288283] pci 0000:00:0a.0: PCI
bridge to [bus 05-05]
Nov  8 23:05:54 knummi kernel: [    0.288345] pci 0000:00:0a.0:
bridge window [io  0xb000-0xbfff]
Nov  8 23:05:54 knummi kernel: [    0.288347] pci 0000:00:0a.0:
bridge window [mem 0xfe200000-0xfe2fffff]
Nov  8 23:05:54 knummi kernel: [    0.288368] pci 0000:06:05.0:
[1131:7146] type 0 class 0x000480
Nov  8 23:05:54 knummi kernel: [    0.288381] pci 0000:06:05.0: reg
10: [mem 0xfe101000-0xfe1011ff]
Nov  8 23:05:54 knummi kernel: [    0.288442] pci 0000:06:06.0:
[1131:7146] type 0 class 0x000480
Nov  8 23:05:54 knummi kernel: [    0.288455] pci 0000:06:06.0: reg
10: [mem 0xfe100000-0xfe1001ff]
Nov  8 23:05:54 knummi kernel: [    0.288539] pci 0000:00:14.4: PCI
bridge to [bus 06-06] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288606] pci 0000:00:14.4:
bridge window [mem 0xfe100000-0xfe1fffff]
Nov  8 23:05:54 knummi kernel: [    0.288609] pci 0000:00:14.4:
bridge window [io  0x0000-0x03af] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288611] pci 0000:00:14.4:
bridge window [io  0x03e0-0x0cf7] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288612] pci 0000:00:14.4:
bridge window [io  0x03b0-0x03df] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288614] pci 0000:00:14.4:
bridge window [io  0x0d00-0xffff] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288616] pci 0000:00:14.4:
bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288617] pci 0000:00:14.4:
bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288619] pci 0000:00:14.4:
bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
Nov  8 23:05:54 knummi kernel: [    0.288633] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288706] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.P0PC._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288750] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.PC02._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288765] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.PC04._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288781] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.PC06._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288803] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.PC07._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288820] ACPI: PCI Interrupt
Routing Table [\_SB_.PCI0.PC0A._PRT]
Nov  8 23:05:54 knummi kernel: [    0.288837]  pci0000:00: Requesting
ACPI _OSC control (0x1d)
Nov  8 23:05:54 knummi kernel: [    0.288899]  pci0000:00: ACPI _OSC
request failed (AE_NOT_FOUND), returned control mask: 0x1d
Nov  8 23:05:54 knummi kernel: [    0.288966] ACPI _OSC control for
PCIe not granted, disabling ASPM
Nov  8 23:05:54 knummi kernel: [    0.292238] ACPI: PCI Interrupt Link
[LNKA] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.292665] ACPI: PCI Interrupt Link
[LNKB] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.293088] ACPI: PCI Interrupt Link
[LNKC] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.293512] ACPI: PCI Interrupt Link
[LNKD] (IRQs 3 4 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.293929] ACPI: PCI Interrupt Link
[LNKE] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.294329] ACPI: PCI Interrupt Link
[LNKF] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.294738] ACPI: PCI Interrupt Link
[LNKG] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.295145] ACPI: PCI Interrupt Link
[LNKH] (IRQs 4 7 10 11 14 15) *0
Nov  8 23:05:54 knummi kernel: [    0.295572] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov  8 23:05:54 knummi kernel: [    0.295572] vgaarb: loaded
Nov  8 23:05:54 knummi kernel: [    0.295572] vgaarb: bridge control
possible 0000:01:00.0
Nov  8 23:05:54 knummi kernel: [    0.295572] SCSI subsystem initialized
Nov  8 23:05:54 knummi kernel: [    0.295974] libata version 3.00 loaded.
Nov  8 23:05:54 knummi kernel: [    0.296041] wmi: Mapper loaded
Nov  8 23:05:54 knummi kernel: [    0.296097] PCI: Using ACPI for  
IRQ routing
Nov  8 23:05:54 knummi kernel: [    0.302191] PCI: pci_cache_line_size
set to 64 bytes
Nov  8 23:05:54 knummi kernel: [    0.302260] reserve RAM buffer:
000000000009d800 - 000000000009ffff
Nov  8 23:05:54 knummi kernel: [    0.302262] reserve RAM buffer:
00000000cd952000 - 00000000cfffffff
Nov  8 23:05:54 knummi kernel: [    0.302265] reserve RAM buffer:
00000000cdf00000 - 00000000cfffffff
Nov  8 23:05:54 knummi kernel: [    0.302316] NetLabel: Initializing
Nov  8 23:05:54 knummi kernel: [    0.302372] NetLabel:  domain hash
size = 128
Nov  8 23:05:54 knummi kernel: [    0.302430] NetLabel:  protocols =
UNLABELED CIPSOv4
Nov  8 23:05:54 knummi kernel: [    0.302497] NetLabel:  unlabeled
traffic allowed by default
Nov  8 23:05:54 knummi kernel: [    0.302568] hpet0: at MMIO
0xfed00000, IRQs 2, 8, 0
Nov  8 23:05:54 knummi kernel: [    0.302568] hpet0: 3 comparators,
32-bit 14.318180 MHz counter
Nov  8 23:05:54 knummi kernel: [    0.303987] Switching to clocksource hpet
Nov  8 23:05:54 knummi kernel: [    0.305972] Switched to NOHz mode  
on CPU #3
Nov  8 23:05:54 knummi kernel: [    0.305975] Switched to NOHz mode  
on CPU #2
Nov  8 23:05:54 knummi kernel: [    0.305978] Switched to NOHz mode  
on CPU #1
Nov  8 23:05:54 knummi kernel: [    0.305979] Switched to NOHz mode  
on CPU #0
Nov  8 23:05:54 knummi kernel: [    0.308983] AppArmor: AppArmor
Filesystem Enabled
Nov  8 23:05:54 knummi kernel: [    0.309064] pnp: PnP ACPI init
Nov  8 23:05:54 knummi kernel: [    0.309127] ACPI: bus type pnp registered
Nov  8 23:05:54 knummi kernel: [    0.309269] pnp 00:00: [bus 00-ff]
Nov  8 23:05:54 knummi kernel: [    0.309271] pnp 00:00: [io  0x0cf8-0x0cff]
Nov  8 23:05:54 knummi kernel: [    0.309273] pnp 00:00: [io
0x0000-0x03af window]
Nov  8 23:05:54 knummi kernel: [    0.309274] pnp 00:00: [io
0x03e0-0x0cf7 window]
Nov  8 23:05:54 knummi kernel: [    0.309275] pnp 00:00: [io
0x03b0-0x03df window]
Nov  8 23:05:54 knummi kernel: [    0.309277] pnp 00:00: [io
0x0d00-0xffff window]
Nov  8 23:05:54 knummi kernel: [    0.309278] pnp 00:00: [mem
0x000a0000-0x000bffff window]
Nov  8 23:05:54 knummi kernel: [    0.309280] pnp 00:00: [mem
0x000c0000-0x000dffff window]
Nov  8 23:05:54 knummi kernel: [    0.309281] pnp 00:00: [mem
0xd0000000-0xffffffff window]
Nov  8 23:05:54 knummi kernel: [    0.309282] pnp 00:00: [mem
0x00000000 window]
Nov  8 23:05:54 knummi kernel: [    0.309312] pnp 00:00: Plug and Play
ACPI device, IDs PNP0a03 (active)
Nov  8 23:05:54 knummi kernel: [    0.309331] pnp 00:01: [mem
0xe0000000-0xefffffff]
Nov  8 23:05:54 knummi kernel: [    0.309363] system 00:01: [mem
0xe0000000-0xefffffff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.309427] system 00:01: Plug and
Play ACPI device, IDs PNP0c01 (active)
Nov  8 23:05:54 knummi kernel: [    0.309708] pnp 00:02: [io  0x040b]
Nov  8 23:05:54 knummi kernel: [    0.309709] pnp 00:02: [io  0x04d6]
Nov  8 23:05:54 knummi kernel: [    0.309710] pnp 00:02: [io  0x0c00-0x0c01]
Nov  8 23:05:54 knummi kernel: [    0.309712] pnp 00:02: [io  0x0c14]
Nov  8 23:05:54 knummi kernel: [    0.309713] pnp 00:02: [io  0x0c50-0x0c51]
Nov  8 23:05:54 knummi kernel: [    0.309714] pnp 00:02: [io  0x0c52]
Nov  8 23:05:54 knummi kernel: [    0.309715] pnp 00:02: [io  0x0c6c]
Nov  8 23:05:54 knummi kernel: [    0.309716] pnp 00:02: [io  0x0c6f]
Nov  8 23:05:54 knummi kernel: [    0.309717] pnp 00:02: [io  0x0cd0-0x0cd1]
Nov  8 23:05:54 knummi kernel: [    0.309718] pnp 00:02: [io  0x0cd2-0x0cd3]
Nov  8 23:05:54 knummi kernel: [    0.309720] pnp 00:02: [io  0x0cd4-0x0cd5]
Nov  8 23:05:54 knummi kernel: [    0.309721] pnp 00:02: [io  0x0cd6-0x0cd7]
Nov  8 23:05:54 knummi kernel: [    0.309722] pnp 00:02: [io  0x0cd8-0x0cdf]
Nov  8 23:05:54 knummi kernel: [    0.309723] pnp 00:02: [io  0x0800-0x089f]
Nov  8 23:05:54 knummi kernel: [    0.309725] pnp 00:02: [io
0x0000-0xffffffffffffffff disabled]
Nov  8 23:05:54 knummi kernel: [    0.309726] pnp 00:02: [io  0x0000-0x000f]
Nov  8 23:05:54 knummi kernel: [    0.309727] pnp 00:02: [io  0x0b20-0x0b3f]
Nov  8 23:05:54 knummi kernel: [    0.309728] pnp 00:02: [io  0x0900-0x090f]
Nov  8 23:05:54 knummi kernel: [    0.309730] pnp 00:02: [io  0x0910-0x091f]
Nov  8 23:05:54 knummi kernel: [    0.309731] pnp 00:02: [io  0xfe00-0xfefe]
Nov  8 23:05:54 knummi kernel: [    0.309732] pnp 00:02: [io
0x0060-0x005f disabled]
Nov  8 23:05:54 knummi kernel: [    0.309734] pnp 00:02: [io
0x0064-0x0063 disabled]
Nov  8 23:05:54 knummi kernel: [    0.309735] pnp 00:02: [mem
0xfec00000-0xfec00fff]
Nov  8 23:05:54 knummi kernel: [    0.309736] pnp 00:02: [mem
0xfee00000-0xfee00fff]
Nov  8 23:05:54 knummi kernel: [    0.309738] pnp 00:02: [mem
0xfed80000-0xfed8ffff]
Nov  8 23:05:54 knummi kernel: [    0.309740] pnp 00:02: [mem
0xfed61000-0xfed70fff]
Nov  8 23:05:54 knummi kernel: [    0.309742] pnp 00:02: [mem
0xfec10000-0xfec10fff]
Nov  8 23:05:54 knummi kernel: [    0.309743] pnp 00:02: [mem
0xfed00000-0xfed00fff]
Nov  8 23:05:54 knummi kernel: [    0.309745] pnp 00:02: [mem
0xffc00000-0xffffffff]
Nov  8 23:05:54 knummi kernel: [    0.309795] system 00:02: [io
0x040b] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.309855] system 00:02: [io
0x04d6] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.309915] system 00:02: [io
0x0c00-0x0c01] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.309977] system 00:02: [io
0x0c14] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310044] system 00:02: [io
0x0c50-0x0c51] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310105] system 00:02: [io
0x0c52] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310165] system 00:02: [io
0x0c6c] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310225] system 00:02: [io
0x0c6f] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310286] system 00:02: [io
0x0cd0-0x0cd1] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310347] system 00:02: [io
0x0cd2-0x0cd3] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310409] system 00:02: [io
0x0cd4-0x0cd5] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310470] system 00:02: [io
0x0cd6-0x0cd7] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310531] system 00:02: [io
0x0cd8-0x0cdf] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310593] system 00:02: [io
0x0800-0x089f] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310654] system 00:02: [io
0x0b20-0x0b3f] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310716] system 00:02: [io
0x0900-0x090f] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310777] system 00:02: [io
0x0910-0x091f] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310839] system 00:02: [io
0xfe00-0xfefe] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.310900] system 00:02: [mem
0xfec00000-0xfec00fff] could not be reserved
Nov  8 23:05:54 knummi kernel: [    0.310964] system 00:02: [mem
0xfee00000-0xfee00fff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311032] system 00:02: [mem
0xfed80000-0xfed8ffff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311095] system 00:02: [mem
0xfed61000-0xfed70fff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311157] system 00:02: [mem
0xfec10000-0xfec10fff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311222] system 00:02: [mem
0xfed00000-0xfed00fff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311284] system 00:02: [mem
0xffc00000-0xffffffff] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311348] system 00:02: Plug and
Play ACPI device, IDs PNP0c02 (active)
Nov  8 23:05:54 knummi kernel: [    0.311413] pnp 00:03: [io
0x0000-0xffffffffffffffff disabled]
Nov  8 23:05:54 knummi kernel: [    0.311415] pnp 00:03: [io  0x0290-0x02af]
Nov  8 23:05:54 knummi kernel: [    0.311416] pnp 00:03: [io
0x0000-0xffffffffffffffff disabled]
Nov  8 23:05:54 knummi kernel: [    0.311443] system 00:03: [io
0x0290-0x02af] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311504] system 00:03: Plug and
Play ACPI device, IDs PNP0c02 (active)
Nov  8 23:05:54 knummi kernel: [    0.311513] pnp 00:04: [dma 4]
Nov  8 23:05:54 knummi kernel: [    0.311514] pnp 00:04: [io  0x0000-0x000f]
Nov  8 23:05:54 knummi kernel: [    0.311515] pnp 00:04: [io  0x0081-0x0083]
Nov  8 23:05:54 knummi kernel: [    0.311517] pnp 00:04: [io  0x0087]
Nov  8 23:05:54 knummi kernel: [    0.311518] pnp 00:04: [io  0x0089-0x008b]
Nov  8 23:05:54 knummi kernel: [    0.311519] pnp 00:04: [io  0x008f]
Nov  8 23:05:54 knummi kernel: [    0.311520] pnp 00:04: [io  0x00c0-0x00df]
Nov  8 23:05:54 knummi kernel: [    0.311534] pnp 00:04: Plug and Play
ACPI device, IDs PNP0200 (active)
Nov  8 23:05:54 knummi kernel: [    0.311540] pnp 00:05: [io  0x0070-0x0071]
Nov  8 23:05:54 knummi kernel: [    0.311546] pnp 00:05: [irq 8]
Nov  8 23:05:54 knummi kernel: [    0.311560] pnp 00:05: Plug and Play
ACPI device, IDs PNP0b00 (active)
Nov  8 23:05:54 knummi kernel: [    0.311564] pnp 00:06: [io  0x0061]
Nov  8 23:05:54 knummi kernel: [    0.311577] pnp 00:06: Plug and Play
ACPI device, IDs PNP0800 (active)
Nov  8 23:05:54 knummi kernel: [    0.311590] pnp 00:07: [io  0x0010-0x001f]
Nov  8 23:05:54 knummi kernel: [    0.311591] pnp 00:07: [io  0x0022-0x003f]
Nov  8 23:05:54 knummi kernel: [    0.311592] pnp 00:07: [io  0x0044-0x005f]
Nov  8 23:05:54 knummi kernel: [    0.311593] pnp 00:07: [io  0x0062-0x0063]
Nov  8 23:05:54 knummi kernel: [    0.311594] pnp 00:07: [io  0x0065-0x006f]
Nov  8 23:05:54 knummi kernel: [    0.311596] pnp 00:07: [io  0x0072-0x007f]
Nov  8 23:05:54 knummi kernel: [    0.311597] pnp 00:07: [io  0x0080]
Nov  8 23:05:54 knummi kernel: [    0.311598] pnp 00:07: [io  0x0084-0x0086]
Nov  8 23:05:54 knummi kernel: [    0.311599] pnp 00:07: [io  0x0088]
Nov  8 23:05:54 knummi kernel: [    0.311600] pnp 00:07: [io  0x008c-0x008e]
Nov  8 23:05:54 knummi kernel: [    0.311601] pnp 00:07: [io  0x0090-0x009f]
Nov  8 23:05:54 knummi kernel: [    0.311603] pnp 00:07: [io  0x00a2-0x00bf]
Nov  8 23:05:54 knummi kernel: [    0.311604] pnp 00:07: [io  0x00e0-0x00ef]
Nov  8 23:05:54 knummi kernel: [    0.311605] pnp 00:07: [io  0x04d0-0x04d1]
Nov  8 23:05:54 knummi kernel: [    0.311639] system 00:07: [io
0x04d0-0x04d1] has been reserved
Nov  8 23:05:54 knummi kernel: [    0.311701] system 00:07: Plug and
Play ACPI device, IDs PNP0c02 (active)
Nov  8 23:05:54 knummi kernel: [    0.311706] pnp 00:08: [io  0x00f0-0x00ff]
Nov  8 23:05:54 knummi kernel: [    0.311709] pnp 00:08: [irq 13]
Nov  8 23:05:54 knummi kernel: [    0.311723] pnp 00:08: Plug and Play
ACPI device, IDs PNP0c04 (active)
Nov  8 23:05:54 knummi kernel: [    0.311755] system 00:09: Plug and
Play ACPI device, IDs PNP0c02 (active)
Nov  8 23:05:54 knummi kernel: [    0.311767] pnp 00:0a: [io  0x0060]
Nov  8 23:05:54 knummi kernel: [    0.311769] pnp 00:0a: [io  0x0064]
Nov  8 23:05:54 knummi kernel: [    0.311771] pnp 00:0a: [irq 1]
Nov  8 23:05:54 knummi kernel: [    0.311790] pnp 00:0a: Plug and Play
ACPI device, IDs PNP0303 PNP030b (active)
Nov  8 23:05:54 knummi kernel: [    0.311860] pnp 00:0b: [mem
0x00000000-0xffffffffffffffff disabled]
Nov  8 23:05:54 knummi kernel: [    0.311891] system 00:0b: Plug and
Play ACPI device, IDs PNP0c02 (active)
Nov  8 23:05:54 knummi kernel: [    0.311940] pnp 00:0c: [mem
0x00000000-0xffffffffffffffff disabled]
Nov  8 23:05:54 knummi kernel: [    0.311942] pnp 00:0c: [mem
0xfec20000-0xfec200ff]
Nov  8 23:05:54 knummi kernel: [    0.311973] system 00:0c: [mem
0xfec20000-0xfec200ff] could not be reserved
Nov  8 23:05:54 knummi kernel: [    0.312043] system 00:0c: Plug and
Play ACPI device, IDs PNP0c02 (active)
Nov  8 23:05:54 knummi kernel: [    0.312127] pnp 00:0d: [mem
0xfed00000-0xfed003ff]
Nov  8 23:05:54 knummi kernel: [    0.312152] pnp 00:0d: Plug and Play
ACPI device, IDs PNP0103 (active)
Nov  8 23:05:54 knummi kernel: [    0.312156] pnp: PnP ACPI: found  
14 devices
Nov  8 23:05:54 knummi kernel: [    0.312214] ACPI: ACPI bus type pnp
unregistered
Nov  8 23:05:54 knummi kernel: [    0.318596] pci 0000:05:00.0: no
compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
Nov  8 23:05:54 knummi kernel: [    0.318678] PCI: max bus depth: 1
pci_try_num: 2
Nov  8 23:05:54 knummi kernel: [    0.318699] pci 0000:00:06.0: BAR
15: assigned [mem 0xda000000-0xda0fffff pref]
Nov  8 23:05:54 knummi kernel: [    0.318777] pci 0000:00:0a.0: BAR
15: assigned [mem 0xda200000-0xda2fffff pref]
Nov  8 23:05:54 knummi kernel: [    0.318855] pci 0000:00:02.0: PCI
bridge to [bus 01-01]
Nov  8 23:05:54 knummi kernel: [    0.318916] pci 0000:00:02.0:
bridge window [io  0xe000-0xefff]
Nov  8 23:05:54 knummi kernel: [    0.318978] pci 0000:00:02.0:
bridge window [mem 0xfd000000-0xfe0fffff]
Nov  8 23:05:54 knummi kernel: [    0.319047] pci 0000:00:02.0:
bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.319126] pci 0000:00:04.0: PCI
bridge to [bus 02-02]
Nov  8 23:05:54 knummi kernel: [    0.319187] pci 0000:00:04.0:
bridge window [io  0xd000-0xdfff]
Nov  8 23:05:54 knummi kernel: [    0.319250] pci 0000:00:04.0:
bridge window [mem 0xda100000-0xda1fffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.319330] pci 0000:03:00.0: BAR 6:
assigned [mem 0xda000000-0xda00ffff pref]
Nov  8 23:05:54 knummi kernel: [    0.319407] pci 0000:00:06.0: PCI
bridge to [bus 03-03]
Nov  8 23:05:54 knummi kernel: [    0.319467] pci 0000:00:06.0:
bridge window [io  0xc000-0xcfff]
Nov  8 23:05:54 knummi kernel: [    0.319529] pci 0000:00:06.0:
bridge window [mem 0xfe400000-0xfe4fffff]
Nov  8 23:05:54 knummi kernel: [    0.319593] pci 0000:00:06.0:
bridge window [mem 0xda000000-0xda0fffff pref]
Nov  8 23:05:54 knummi kernel: [    0.319671] pci 0000:00:07.0: PCI
bridge to [bus 04-04]
Nov  8 23:05:54 knummi kernel: [    0.319732] pci 0000:00:07.0:
bridge window [mem 0xfe300000-0xfe3fffff]
Nov  8 23:05:54 knummi kernel: [    0.319797] pci 0000:05:00.0: BAR 6:
assigned [mem 0xda200000-0xda21ffff pref]
Nov  8 23:05:54 knummi kernel: [    0.319874] pci 0000:00:0a.0: PCI
bridge to [bus 05-05]
Nov  8 23:05:54 knummi kernel: [    0.319934] pci 0000:00:0a.0:
bridge window [io  0xb000-0xbfff]
Nov  8 23:05:54 knummi kernel: [    0.319997] pci 0000:00:0a.0:
bridge window [mem 0xfe200000-0xfe2fffff]
Nov  8 23:05:54 knummi kernel: [    0.320065] pci 0000:00:0a.0:
bridge window [mem 0xda200000-0xda2fffff pref]
Nov  8 23:05:54 knummi kernel: [    0.320144] pci 0000:00:14.4: PCI
bridge to [bus 06-06]
Nov  8 23:05:54 knummi kernel: [    0.320206] pci 0000:00:14.4:
bridge window [mem 0xfe100000-0xfe1fffff]
Nov  8 23:05:54 knummi kernel: [    0.320281] pci 0000:00:02.0: PCI
INT A -> GSI 52 (level, low) -> IRQ 52
Nov  8 23:05:54 knummi kernel: [    0.320345] pci 0000:00:02.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    0.320349] pci 0000:00:04.0: PCI
INT A -> GSI 52 (level, low) -> IRQ 52
Nov  8 23:05:54 knummi kernel: [    0.320412] pci 0000:00:04.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    0.320417] pci 0000:00:06.0: PCI
INT A -> GSI 53 (level, low) -> IRQ 53
Nov  8 23:05:54 knummi kernel: [    0.320481] pci 0000:00:06.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    0.320484] pci 0000:00:07.0: PCI
INT A -> GSI 53 (level, low) -> IRQ 53
Nov  8 23:05:54 knummi kernel: [    0.320547] pci 0000:00:07.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    0.320552] pci 0000:00:0a.0: PCI
INT A -> GSI 54 (level, low) -> IRQ 54
Nov  8 23:05:54 knummi kernel: [    0.320615] pci 0000:00:0a.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    0.320620] pci_bus 0000:00:
resource 4 [io  0x0000-0x03af]
Nov  8 23:05:54 knummi kernel: [    0.320622] pci_bus 0000:00:
resource 5 [io  0x03e0-0x0cf7]
Nov  8 23:05:54 knummi kernel: [    0.320623] pci_bus 0000:00:
resource 6 [io  0x03b0-0x03df]
Nov  8 23:05:54 knummi kernel: [    0.320625] pci_bus 0000:00:
resource 7 [io  0x0d00-0xffff]
Nov  8 23:05:54 knummi kernel: [    0.320626] pci_bus 0000:00:
resource 8 [mem 0x000a0000-0x000bffff]
Nov  8 23:05:54 knummi kernel: [    0.320628] pci_bus 0000:00:
resource 9 [mem 0x000c0000-0x000dffff]
Nov  8 23:05:54 knummi kernel: [    0.320629] pci_bus 0000:00:
resource 10 [mem 0xd0000000-0xffffffff]
Nov  8 23:05:54 knummi kernel: [    0.320631] pci_bus 0000:01:
resource 0 [io  0xe000-0xefff]
Nov  8 23:05:54 knummi kernel: [    0.320632] pci_bus 0000:01:
resource 1 [mem 0xfd000000-0xfe0fffff]
Nov  8 23:05:54 knummi kernel: [    0.320634] pci_bus 0000:01:
resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.320636] pci_bus 0000:02:
resource 0 [io  0xd000-0xdfff]
Nov  8 23:05:54 knummi kernel: [    0.320637] pci_bus 0000:02:
resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
Nov  8 23:05:54 knummi kernel: [    0.320639] pci_bus 0000:03:
resource 0 [io  0xc000-0xcfff]
Nov  8 23:05:54 knummi kernel: [    0.320640] pci_bus 0000:03:
resource 1 [mem 0xfe400000-0xfe4fffff]
Nov  8 23:05:54 knummi kernel: [    0.320642] pci_bus 0000:03:
resource 2 [mem 0xda000000-0xda0fffff pref]
Nov  8 23:05:54 knummi kernel: [    0.320644] pci_bus 0000:04:
resource 1 [mem 0xfe300000-0xfe3fffff]
Nov  8 23:05:54 knummi kernel: [    0.320645] pci_bus 0000:05:
resource 0 [io  0xb000-0xbfff]
Nov  8 23:05:54 knummi kernel: [    0.320647] pci_bus 0000:05:
resource 1 [mem 0xfe200000-0xfe2fffff]
Nov  8 23:05:54 knummi kernel: [    0.320648] pci_bus 0000:05:
resource 2 [mem 0xda200000-0xda2fffff pref]
Nov  8 23:05:54 knummi kernel: [    0.320650] pci_bus 0000:06:
resource 1 [mem 0xfe100000-0xfe1fffff]
Nov  8 23:05:54 knummi kernel: [    0.320652] pci_bus 0000:06:
resource 4 [io  0x0000-0x03af]
Nov  8 23:05:54 knummi kernel: [    0.320653] pci_bus 0000:06:
resource 5 [io  0x03e0-0x0cf7]
Nov  8 23:05:54 knummi kernel: [    0.320655] pci_bus 0000:06:
resource 6 [io  0x03b0-0x03df]
Nov  8 23:05:54 knummi kernel: [    0.320656] pci_bus 0000:06:
resource 7 [io  0x0d00-0xffff]
Nov  8 23:05:54 knummi kernel: [    0.320657] pci_bus 0000:06:
resource 8 [mem 0x000a0000-0x000bffff]
Nov  8 23:05:54 knummi kernel: [    0.320659] pci_bus 0000:06:
resource 9 [mem 0x000c0000-0x000dffff]
Nov  8 23:05:54 knummi kernel: [    0.320661] pci_bus 0000:06:
resource 10 [mem 0xd0000000-0xffffffff]
Nov  8 23:05:54 knummi kernel: [    0.320682] NET: Registered protocol
family 2
Nov  8 23:05:54 knummi kernel: [    0.320898] IP route cache hash
table entries: 262144 (order: 9, 2097152 bytes)
Nov  8 23:05:54 knummi kernel: [    0.321942] TCP established hash
table entries: 524288 (order: 11, 8388608 bytes)
Nov  8 23:05:54 knummi kernel: [    0.323880] TCP bind hash table
entries: 65536 (order: 8, 1048576 bytes)
Nov  8 23:05:54 knummi kernel: [    0.324178] TCP: Hash tables
configured (established 524288 bind 65536)
Nov  8 23:05:54 knummi kernel: [    0.324241] TCP reno registered
Nov  8 23:05:54 knummi kernel: [    0.324308] UDP hash table entries:
4096 (order: 5, 131072 bytes)
Nov  8 23:05:54 knummi kernel: [    0.324411] UDP-Lite hash table
entries: 4096 (order: 5, 131072 bytes)
Nov  8 23:05:54 knummi kernel: [    0.324565] NET: Registered protocol
family 1
Nov  8 23:05:54 knummi kernel: [    0.408135] pci 0000:01:00.0: Boot
video device
Nov  8 23:05:54 knummi kernel: [    0.408176] PCI: CLS 64 bytes, default 64
Nov  8 23:05:54 knummi kernel: [    0.408211] Trying to unpack rootfs
image as initramfs...
Nov  8 23:05:54 knummi kernel: [    0.555355] Freeing initrd memory:
11012k freed
Nov  8 23:05:54 knummi kernel: [    0.559233] PCI-DMA: Disabling AGP.
Nov  8 23:05:54 knummi kernel: [    0.559357] PCI-DMA: aperture base @
f8000000 size 65536 KB
Nov  8 23:05:54 knummi kernel: [    0.559418] init_memory_mapping:
00000000f8000000-00000000fc000000
Nov  8 23:05:54 knummi kernel: [    0.559480]  00f8000000 -  
00fc000000 page 2M
Nov  8 23:05:54 knummi kernel: [    0.559484] PCI-DMA: using GART IOMMU.
Nov  8 23:05:54 knummi kernel: [    0.559542] PCI-DMA: Reserving 64MB
of IOMMU area in the AGP aperture
Nov  8 23:05:54 knummi kernel: [    0.562673] audit: initializing
netlink socket (disabled)
Nov  8 23:05:54 knummi kernel: [    0.562747] type=2000
audit(1320786340.561:1): initialized
Nov  8 23:05:54 knummi kernel: [    0.592518] HugeTLB registered 2 MB
page size, pre-allocated 0 pages
Nov  8 23:05:54 knummi kernel: [    0.627654] VFS: Disk quotas dquot_6.5.2
Nov  8 23:05:54 knummi kernel: [    0.627760] Dquot-cache hash table
entries: 512 (order 0, 4096 bytes)
Nov  8 23:05:54 knummi kernel: [    0.628431] fuse init (API version 7.17)
Nov  8 23:05:54 knummi kernel: [    0.628573] msgmni has been set to 16024
Nov  8 23:05:54 knummi kernel: [    0.628830] Block layer SCSI generic
(bsg) driver version 0.4 loaded (major 253)
Nov  8 23:05:54 knummi kernel: [    0.628908] io scheduler noop registered
Nov  8 23:05:54 knummi kernel: [    0.630183] io scheduler deadline  
registered
Nov  8 23:05:54 knummi kernel: [    0.630275] io scheduler cfq
registered (default)
Nov  8 23:05:54 knummi kernel: [    0.630709] pci_hotplug: PCI Hot
Plug PCI Core version: 0.5
Nov  8 23:05:54 knummi kernel: [    0.630781] pciehp: PCI Express Hot
Plug Controller Driver version: 0.4
Nov  8 23:05:54 knummi kernel: [    0.630941] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Nov  8 23:05:54 knummi kernel: [    0.631044] ACPI: Power Button [PWRB]
Nov  8 23:05:54 knummi kernel: [    0.631123] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Nov  8 23:05:54 knummi kernel: [    0.631201] ACPI: Power Button [PWRF]
Nov  8 23:05:54 knummi kernel: [    0.631371] ACPI: acpi_idle
registered with cpuidle
Nov  8 23:05:54 knummi kernel: [    0.631394] ACPI: processor limited
to max C-state 1
Nov  8 23:05:54 knummi kernel: [    0.677472] ERST: Table is not found!
Nov  8 23:05:54 knummi kernel: [    0.677590] Serial: 8250/16550
driver, 4 ports, IRQ sharing enabled
Nov  8 23:05:54 knummi kernel: [    0.679298] Linux agpgart interface v0.103
Nov  8 23:05:54 knummi kernel: [    0.680123] brd: module loaded
Nov  8 23:05:54 knummi kernel: [    0.680571] loop: module loaded
Nov  8 23:05:54 knummi kernel: [    0.680783] ahci 0000:00:11.0: version 3.0
Nov  8 23:05:54 knummi kernel: [    0.680799] ahci 0000:00:11.0: PCI
INT A -> GSI 19 (level, low) -> IRQ 19
Nov  8 23:05:54 knummi kernel: [    0.680957] ahci 0000:00:11.0: AHCI
0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
Nov  8 23:05:54 knummi kernel: [    0.681059] ahci 0000:00:11.0:
flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
Nov  8 23:05:54 knummi kernel: [    0.681601] scsi0 : ahci
Nov  8 23:05:54 knummi kernel: [    0.681720] scsi1 : ahci
Nov  8 23:05:54 knummi kernel: [    0.681819] scsi2 : ahci
Nov  8 23:05:54 knummi kernel: [    0.681920] scsi3 : ahci
Nov  8 23:05:54 knummi kernel: [    0.682035] scsi4 : ahci
Nov  8 23:05:54 knummi kernel: [    0.682136] scsi5 : ahci
Nov  8 23:05:54 knummi kernel: [    0.682368] ata1: SATA max UDMA/133
abar m1024@0xfe50b000 port 0xfe50b100 irq 19
Nov  8 23:05:54 knummi kernel: [    0.682447] ata2: SATA max UDMA/133
abar m1024@0xfe50b000 port 0xfe50b180 irq 19
Nov  8 23:05:54 knummi kernel: [    0.682525] ata3: SATA max UDMA/133
abar m1024@0xfe50b000 port 0xfe50b200 irq 19
Nov  8 23:05:54 knummi kernel: [    0.682603] ata4: SATA max UDMA/133
abar m1024@0xfe50b000 port 0xfe50b280 irq 19
Nov  8 23:05:54 knummi kernel: [    0.682681] ata5: SATA max UDMA/133
abar m1024@0xfe50b000 port 0xfe50b300 irq 19
Nov  8 23:05:54 knummi kernel: [    0.682759] ata6: SATA max UDMA/133
abar m1024@0xfe50b000 port 0xfe50b380 irq 19
Nov  8 23:05:54 knummi kernel: [    0.682945] ahci 0000:03:00.0: PCI
INT A -> GSI 51 (level, low) -> IRQ 51
Nov  8 23:05:54 knummi kernel: [    0.683109] ahci 0000:03:00.0: AHCI
0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Nov  8 23:05:54 knummi kernel: [    0.683197] ahci 0000:03:00.0:
flags: 64bit ncq pm led clo pmp pio slum part
Nov  8 23:05:54 knummi kernel: [    0.683263] ahci 0000:03:00.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    0.683438] scsi6 : ahci
Nov  8 23:05:54 knummi kernel: [    0.683536] scsi7 : ahci
Nov  8 23:05:54 knummi kernel: [    0.683631] ata7: SATA max UDMA/133
abar m512@0xfe410000 port 0xfe410100 irq 51
Nov  8 23:05:54 knummi kernel: [    0.683709] ata8: SATA max UDMA/133
abar m512@0xfe410000 port 0xfe410180 irq 51
Nov  8 23:05:54 knummi kernel: [    0.683967] Fixed MDIO Bus: probed
Nov  8 23:05:54 knummi kernel: [    0.684064] PPP generic driver  
version 2.4.2
Nov  8 23:05:54 knummi kernel: [    0.684157] tun: Universal TUN/TAP
device driver, 1.6
Nov  8 23:05:54 knummi kernel: [    0.684216] tun: (C) 1999-2004 Max
Krasnyansky <maxk@xxxxxxxxxxxx>
Nov  8 23:05:54 knummi kernel: [    0.684338] i8042: PNP: PS/2
Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Nov  8 23:05:54 knummi kernel: [    0.684400] i8042: PNP: PS/2 appears
to have AUX port disabled, if this is incorrect please boot with
i8042.nopnp
Nov  8 23:05:54 knummi kernel: [    0.684586] serio: i8042 KBD port at
0x60,0x64 irq 1
Nov  8 23:05:54 knummi kernel: [    0.684706] mousedev: PS/2 mouse
device common for all mice
Nov  8 23:05:54 knummi kernel: [    0.684854] rtc_cmos 00:05: RTC can
wake from S4
Nov  8 23:05:54 knummi kernel: [    0.684977] rtc_cmos 00:05: rtc
core: registered rtc_cmos as rtc0
Nov  8 23:05:54 knummi kernel: [    0.685078] rtc0: alarms up to one
month, y3k, 114 bytes nvram, hpet irqs
Nov  8 23:05:54 knummi kernel: [    0.685146] md: raid1 personality
registered for level 1
Nov  8 23:05:54 knummi kernel: [    0.685284] device-mapper: uevent:
version 1.0.3
Nov  8 23:05:54 knummi kernel: [    0.685400] device-mapper: ioctl:
4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx
Nov  8 23:05:54 knummi kernel: [    0.685549] device-mapper:
multipath: version 1.3.0 loaded
Nov  8 23:05:54 knummi kernel: [    0.685611] device-mapper: multipath
round-robin: version 1.0.0 loaded
Nov  8 23:05:54 knummi kernel: [    0.685747] cpuidle: using governor ladder
Nov  8 23:05:54 knummi kernel: [    0.685805] cpuidle: using governor menu
Nov  8 23:05:54 knummi kernel: [    0.685863] EFI Variables Facility
v0.08 2004-May-17
Nov  8 23:05:54 knummi kernel: [    0.686063] TCP cubic registered
Nov  8 23:05:54 knummi kernel: [    0.686236] NET: Registered protocol
family 10
Nov  8 23:05:54 knummi kernel: [    0.686578] NET: Registered protocol
family 17
Nov  8 23:05:54 knummi kernel: [    0.686644] Registering the
dns_resolver key type
Nov  8 23:05:54 knummi kernel: [    0.686802] PM: Hibernation image
not present or could not be loaded.
Nov  8 23:05:54 knummi kernel: [    0.686810] registered taskstats version 1
Nov  8 23:05:54 knummi kernel: [    0.703994]   Magic number: 3:373:95
Nov  8 23:05:54 knummi kernel: [    0.704150] rtc_cmos 00:05: setting
system clock to 2011-11-08 21:05:42 UTC (1320786342)
Nov  8 23:05:54 knummi kernel: [    0.704241] powernow-k8: Found 1 AMD
Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
Nov  8 23:05:54 knummi kernel: [    0.704359] powernow-k8:    0 :
pstate 0 (3400 MHz)
Nov  8 23:05:54 knummi kernel: [    0.704418] powernow-k8:    1 :
pstate 1 (2700 MHz)
Nov  8 23:05:54 knummi kernel: [    0.704477] powernow-k8:    2 :
pstate 2 (2200 MHz)
Nov  8 23:05:54 knummi kernel: [    0.704536] powernow-k8:    3 :
pstate 3 (800 MHz)
Nov  8 23:05:54 knummi kernel: [    0.704864] BIOS EDD facility v0.16
2004-Jun-25, 0 devices found
Nov  8 23:05:54 knummi kernel: [    0.704927] EDD information not available.
Nov  8 23:05:54 knummi kernel: [    0.716127] input: AT Translated Set
2 keyboard as /devices/platform/i8042/serio0/input/input2
Nov  8 23:05:54 knummi kernel: [    0.988095] ata5: SATA link down
(SStatus 0 SControl 300)
Nov  8 23:05:54 knummi kernel: [    0.988190] ata7: SATA link down
(SStatus 0 SControl 300)
Nov  8 23:05:54 knummi kernel: [    0.988281] ata8: SATA link down
(SStatus 0 SControl 300)
Nov  8 23:05:54 knummi kernel: [    1.142072] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Nov  8 23:05:54 knummi kernel: [    1.142151] ata1: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Nov  8 23:05:54 knummi kernel: [    1.142225] ata3: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Nov  8 23:05:54 knummi kernel: [    1.142874] ata2.00: ATA-8: WDC
WD1001FALS-00J7B0, 05.00K05, max UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.142938] ata2.00: 1953525168
sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Nov  8 23:05:54 knummi kernel: [    1.143060] ata4: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
Nov  8 23:05:54 knummi kernel: [    1.143214] ata3.00: ATA-8: WDC
WD1001FALS-00J7B0, 05.00K05, max UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.143278] ata3.00: 1953525168
sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Nov  8 23:05:54 knummi kernel: [    1.144907] ata2.00: configured  
for UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.145062] ata3.00: configured  
for UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.179642] ata1.00: ATA-7:
ST3160812AS, 3.AAE, max UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.179704] ata1.00: 312581808
sectors, multi 16: LBA48 NCQ (depth 31/32)
Nov  8 23:05:54 knummi kernel: [    1.188892] ata4.00: ATA-7:
ST3320620AS, 3.AAK, max UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.188954] ata4.00: 625142448
sectors, multi 16: LBA48 NCQ (depth 31/32)
Nov  8 23:05:54 knummi kernel: [    1.238000] ata1.00: configured  
for UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.238200] scsi 0:0:0:0:
Direct-Access     ATA      ST3160812AS      3.AA PQ: 0 ANSI: 5
Nov  8 23:05:54 knummi kernel: [    1.238374] sd 0:0:0:0: Attached
scsi generic sg0 type 0
Nov  8 23:05:54 knummi kernel: [    1.238485] sd 0:0:0:0: [sda]
312581808 512-byte logical blocks: (160 GB/149 GiB)
Nov  8 23:05:54 knummi kernel: [    1.238584] scsi 1:0:0:0:
Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
Nov  8 23:05:54 knummi kernel: [    1.238681] sd 0:0:0:0: [sda] Write
Protect is off
Nov  8 23:05:54 knummi kernel: [    1.238746] sd 0:0:0:0: [sda] Mode
Sense: 00 3a 00 00
Nov  8 23:05:54 knummi kernel: [    1.238767] sd 1:0:0:0: Attached
scsi generic sg1 type 0
Nov  8 23:05:54 knummi kernel: [    1.238782] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov  8 23:05:54 knummi kernel: [    1.238816] sd 1:0:0:0: [sdb]
1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Nov  8 23:05:54 knummi kernel: [    1.238935] sd 1:0:0:0: [sdb] Write
Protect is off
Nov  8 23:05:54 knummi kernel: [    1.238937] sd 1:0:0:0: [sdb] Mode
Sense: 00 3a 00 00
Nov  8 23:05:54 knummi kernel: [    1.239025] sd 1:0:0:0: [sdb] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov  8 23:05:54 knummi kernel: [    1.239284] scsi 2:0:0:0:
Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
Nov  8 23:05:54 knummi kernel: [    1.239453] sd 2:0:0:0: [sdc]
1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Nov  8 23:05:54 knummi kernel: [    1.239463] sd 2:0:0:0: Attached
scsi generic sg2 type 0
Nov  8 23:05:54 knummi kernel: [    1.239656] sd 2:0:0:0: [sdc] Write
Protect is off
Nov  8 23:05:54 knummi kernel: [    1.239716] sd 2:0:0:0: [sdc] Mode
Sense: 00 3a 00 00
Nov  8 23:05:54 knummi kernel: [    1.239743] sd 2:0:0:0: [sdc] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov  8 23:05:54 knummi kernel: [    1.247198] ata4.00: configured  
for UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.247321] scsi 3:0:0:0:
Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
Nov  8 23:05:54 knummi kernel: [    1.247474] sd 3:0:0:0: [sdd]
625142448 512-byte logical blocks: (320 GB/298 GiB)
Nov  8 23:05:54 knummi kernel: [    1.247505] sd 3:0:0:0: Attached
scsi generic sg3 type 0
Nov  8 23:05:54 knummi kernel: [    1.247649]  sdb: sdb1 sdb2 sdb3
Nov  8 23:05:54 knummi kernel: [    1.247663] sd 3:0:0:0: [sdd] Write
Protect is off
Nov  8 23:05:54 knummi kernel: [    1.247664] sd 3:0:0:0: [sdd] Mode
Sense: 00 3a 00 00
Nov  8 23:05:54 knummi kernel: [    1.247674] sd 3:0:0:0: [sdd] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov  8 23:05:54 knummi kernel: [    1.248159] sd 1:0:0:0: [sdb]
Attached SCSI disk
Nov  8 23:05:54 knummi kernel: [    1.253332]  sdc: sdc1 sdc2 sdc3
Nov  8 23:05:54 knummi kernel: [    1.253668] sd 2:0:0:0: [sdc]
Attached SCSI disk
Nov  8 23:05:54 knummi kernel: [    1.277633]  sda: sda1
Nov  8 23:05:54 knummi kernel: [    1.277929] sd 0:0:0:0: [sda]
Attached SCSI disk
Nov  8 23:05:54 knummi kernel: [    1.307767]  sdd: sdd1 sdd2
Nov  8 23:05:54 knummi kernel: [    1.307997] sd 3:0:0:0: [sdd]
Attached SCSI disk
Nov  8 23:05:54 knummi kernel: [    1.564073] Refined TSC clocksource
calibration: 3411.430 MHz.
Nov  8 23:05:54 knummi kernel: [    1.564141] Switching to clocksource tsc
Nov  8 23:05:54 knummi kernel: [    1.704072] ata6: SATA link up 1.5
Gbps (SStatus 113 SControl 300)
Nov  8 23:05:54 knummi kernel: [    1.710033] ata6.00: ATAPI: _NEC
DVD_RW ND-1300A, 1.0C, max UDMA/33
Nov  8 23:05:54 knummi kernel: [    1.710096] ata6.00: applying  
bridge limits
Nov  8 23:05:54 knummi kernel: [    1.716279] ata6.00: configured  
for UDMA/33
Nov  8 23:05:54 knummi kernel: [    1.720525] scsi 5:0:0:0: CD-ROM
        _NEC     DVD_RW ND-1300A  1.0C PQ: 0 ANSI: 5
Nov  8 23:05:54 knummi kernel: [    1.723254] sr0: scsi3-mmc drive:
40x/40x writer cd/rw xa/form2 cdda tray
Nov  8 23:05:54 knummi kernel: [    1.723318] cdrom: Uniform CD-ROM
driver Revision: 3.20
Nov  8 23:05:54 knummi kernel: [    1.723456] sr 5:0:0:0: Attached
scsi CD-ROM sr0
Nov  8 23:05:54 knummi kernel: [    1.723508] sr 5:0:0:0: Attached
scsi generic sg4 type 5
Nov  8 23:05:54 knummi kernel: [    1.724609] Freeing unused kernel
memory: 952k freed
Nov  8 23:05:54 knummi kernel: [    1.724838] Write protecting the
kernel read-only data: 10240k
Nov  8 23:05:54 knummi kernel: [    1.725748] Freeing unused kernel
memory: 352k freed
Nov  8 23:05:54 knummi kernel: [    1.729051] Freeing unused kernel
memory: 1520k freed
Nov  8 23:05:54 knummi kernel: [    1.740766] udev[118]: starting  
version 163
Nov  8 23:05:54 knummi kernel: [    1.753413] usbcore: registered new
interface driver usbfs
Nov  8 23:05:54 knummi kernel: [    1.753486] usbcore: registered new
interface driver hub
Nov  8 23:05:54 knummi kernel: [    1.761229] r8169 Gigabit Ethernet
driver 2.3LK-NAPI loaded
Nov  8 23:05:54 knummi kernel: [    1.761315] r8169 0000:02:00.0: PCI
INT A -> GSI 44 (level, low) -> IRQ 44
Nov  8 23:05:54 knummi kernel: [    1.761416] r8169 0000:02:00.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    1.761466] r8169 0000:02:00.0: irq
72 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.761762] r8169 0000:02:00.0:
eth0: RTL8168evl/8111evl at 0xffffc90000c6e000, 14:da:e9:52:13:d3, XID
0c900800 IRQ 72
Nov  8 23:05:54 knummi kernel: [    1.762749] usbcore: registered new
device driver usb
Nov  8 23:05:54 knummi kernel: [    1.763442] ehci_hcd: USB 2.0
'Enhanced' Host Controller (EHCI) Driver
Nov  8 23:05:54 knummi kernel: [    1.763506] ehci_hcd: block sizes:
qh 112 qtd 96 itd 192 sitd 96
Nov  8 23:05:54 knummi kernel: [    1.763604] ehci_hcd 0000:00:12.2:
PCI INT B -> GSI 17 (level, low) -> IRQ 17
Nov  8 23:05:54 knummi kernel: [    1.763685] ehci_hcd 0000:00:12.2:
EHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.763820] ehci_hcd 0000:00:12.2:
new USB bus registered, assigned bus number 1
Nov  8 23:05:54 knummi kernel: [    1.763904] ehci_hcd 0000:00:12.2:
reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
Nov  8 23:05:54 knummi kernel: [    1.763907] ehci_hcd 0000:00:12.2:
reset hcc_params a072 thresh 7 uframes 256/512/1024
Nov  8 23:05:54 knummi kernel: [    1.763929] ehci_hcd 0000:00:12.2:
debug port 1
Nov  8 23:05:54 knummi kernel: [    1.763991] ehci_hcd 0000:00:12.2:
reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Nov  8 23:05:54 knummi kernel: [    1.763998] ehci_hcd 0000:00:12.2:
MWI active
Nov  8 23:05:54 knummi kernel: [    1.763999] ehci_hcd 0000:00:12.2:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.764096] ehci_hcd 0000:00:12.2:
irq 17, io mem 0xfe509000
Nov  8 23:05:54 knummi kernel: [    1.764338] ohci_hcd: USB 1.1 'Open'
Host Controller (OHCI) Driver
Nov  8 23:05:54 knummi kernel: [    1.764339] ohci_hcd: block sizes:
ed 80 td 96
Nov  8 23:05:54 knummi kernel: [    1.765429] ehci_hcd 0000:00:12.2:
reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Nov  8 23:05:54 knummi kernel: [    1.765435] ehci_hcd 0000:00:12.2:
init command 0010005 (park)=0 ithresh=1 period=512 RUN
Nov  8 23:05:54 knummi kernel: [    1.766367] r8169 Gigabit Ethernet
driver 2.3LK-NAPI loaded
Nov  8 23:05:54 knummi kernel: [    1.766445] r8169 0000:05:00.0: PCI
INT A -> GSI 47 (level, low) -> IRQ 47
Nov  8 23:05:54 knummi kernel: [    1.766531] r8169 0000:05:00.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    1.766578] r8169 0000:05:00.0: irq
73 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.767857] r8169 0000:05:00.0:
eth1: RTL8168b/8111b at 0xffffc90000c6c000, 00:25:86:e0:32:a7, XID
18000000 IRQ 73
Nov  8 23:05:54 knummi kernel: [    1.768283] [drm] Initialized drm
1.1.0 20060810
Nov  8 23:05:54 knummi kernel: [    1.773093] ehci_hcd 0000:00:12.2:
USB 2.0 started, EHCI 1.00
Nov  8 23:05:54 knummi kernel: [    1.773179] usb usb1: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    1.773184] usb usb1: udev 1, busnum
1, minor = 0
Nov  8 23:05:54 knummi kernel: [    1.773185] usb usb1: New USB device
found, idVendor=1d6b, idProduct=0002
Nov  8 23:05:54 knummi kernel: [    1.773248] usb usb1: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    1.773326] usb usb1: Product: EHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    1.773385] usb usb1: Manufacturer:
Linux 3.1.0-tmo5 ehci_hcd
Nov  8 23:05:54 knummi kernel: [    1.773445] usb usb1: SerialNumber:
0000:00:12.2
Nov  8 23:05:54 knummi kernel: [    1.773558] usb usb1: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    1.773560] usb usb1: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    1.773566] usb usb1: adding 1-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    1.773626] hub 1-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    1.773628] hub 1-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    1.773629] hub 1-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.773689] hub 1-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    1.773815] hub 1-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    1.773816] hub 1-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    1.773818] hub 1-0:1.0: individual
port over-current protection
Nov  8 23:05:54 knummi kernel: [    1.773819] hub 1-0:1.0: power on to
power good time: 20ms
Nov  8 23:05:54 knummi kernel: [    1.773823] hub 1-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    1.773824] hub 1-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    1.775533] nouveau 0000:01:00.0:
PCI INT A -> GSI 24 (level, low) -> IRQ 24
Nov  8 23:05:54 knummi kernel: [    1.775601] nouveau 0000:01:00.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    1.776564] [drm] nouveau
0000:01:00.0: Detected an NVc0 generation card (0x0c1080a1)
Nov  8 23:05:54 knummi kernel: [    1.779207] ehci_hcd 0000:00:13.2:
PCI INT B -> GSI 21 (level, low) -> IRQ 21
Nov  8 23:05:54 knummi kernel: [    1.779277] ehci_hcd 0000:00:13.2:
EHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.779340] ehci_hcd 0000:00:13.2:
new USB bus registered, assigned bus number 2
Nov  8 23:05:54 knummi kernel: [    1.779424] ehci_hcd 0000:00:13.2:
reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5
Nov  8 23:05:54 knummi kernel: [    1.779428] ehci_hcd 0000:00:13.2:
reset hcc_params a072 thresh 7 uframes 256/512/1024
Nov  8 23:05:54 knummi kernel: [    1.779448] ehci_hcd 0000:00:13.2:
debug port 1
Nov  8 23:05:54 knummi kernel: [    1.779509] ehci_hcd 0000:00:13.2:
reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Nov  8 23:05:54 knummi kernel: [    1.779516] ehci_hcd 0000:00:13.2:
MWI active
Nov  8 23:05:54 knummi kernel: [    1.779517] ehci_hcd 0000:00:13.2:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.779528] ehci_hcd 0000:00:13.2:
irq 21, io mem 0xfe507000
Nov  8 23:05:54 knummi kernel: [    1.779591] ehci_hcd 0000:00:13.2:
reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Nov  8 23:05:54 knummi kernel: [    1.779596] ehci_hcd 0000:00:13.2:
init command 0010005 (park)=0 ithresh=1 period=512 RUN
Nov  8 23:05:54 knummi kernel: [    1.779926] [drm] nouveau
0000:01:00.0: Attempting to load BIOS image from PRAMIN
Nov  8 23:05:54 knummi kernel: [    1.845727] [drm] nouveau
0000:01:00.0: ... appears to be valid
Nov  8 23:05:54 knummi kernel: [    1.845789] [drm] nouveau
0000:01:00.0: BIT BIOS found
Nov  8 23:05:54 knummi kernel: [    1.845853] [drm] nouveau
0000:01:00.0: Bios version 70.08.29.00
Nov  8 23:05:54 knummi kernel: [    1.845915] [drm] nouveau
0000:01:00.0: TMDS table version 2.0
Nov  8 23:05:54 knummi kernel: [    1.845978] [drm] nouveau
0000:01:00.0: Found Display Configuration Block version 4.0
Nov  8 23:05:54 knummi kernel: [    1.846060] [drm] nouveau
0000:01:00.0: Raw DCB entry 0: 01000302 00020030
Nov  8 23:05:54 knummi kernel: [    1.846124] [drm] nouveau
0000:01:00.0: Raw DCB entry 1: 02000300 00000000
Nov  8 23:05:54 knummi kernel: [    1.846186] [drm] nouveau
0000:01:00.0: Raw DCB entry 2: 08011392 00020020
Nov  8 23:05:54 knummi kernel: [    1.846249] [drm] nouveau
0000:01:00.0: Raw DCB entry 3: 04022310 00000000
Nov  8 23:05:54 knummi kernel: [    1.846313] [drm] nouveau
0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
Nov  8 23:05:54 knummi kernel: [    1.846379] [drm] nouveau
0000:01:00.0:   0: 0x00001030: type 0x30 idx 0 tag 0x07
Nov  8 23:05:54 knummi kernel: [    1.846457] [drm] nouveau
0000:01:00.0:   1: 0x00002161: type 0x61 idx 1 tag 0x08
Nov  8 23:05:54 knummi kernel: [    1.846536] [drm] nouveau
0000:01:00.0:   2: 0x00000200: type 0x00 idx 2 tag 0xff
Nov  8 23:05:54 knummi kernel: [    1.846616] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6BB6
Nov  8 23:05:54 knummi kernel: [    1.866851] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table 1 at offset 0x71FC
Nov  8 23:05:54 knummi kernel: [    1.873977] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8391
Nov  8 23:05:54 knummi kernel: [    1.874057] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8395
Nov  8 23:05:54 knummi kernel: [    1.874179] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table 4 at offset 0x847D
Nov  8 23:05:54 knummi kernel: [    1.874257] [drm] nouveau
0000:01:00.0: Parsing VBIOS init table at offset 0x84E2
Nov  8 23:05:54 knummi kernel: [    1.894337] [drm] nouveau
0000:01:00.0: 0x6B29: Condition still not met after 20ms, skipping
following opcodes
Nov  8 23:05:54 knummi kernel: [    1.894445] ehci_hcd 0000:00:13.2:
USB 2.0 started, EHCI 1.00
Nov  8 23:05:54 knummi kernel: [    1.894524] usb usb2: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    1.894528] usb usb2: udev 1, busnum
2, minor = 128
Nov  8 23:05:54 knummi kernel: [    1.894529] usb usb2: New USB device
found, idVendor=1d6b, idProduct=0002
Nov  8 23:05:54 knummi kernel: [    1.894593] usb usb2: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    1.894670] usb usb2: Product: EHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    1.894730] usb usb2: Manufacturer:
Linux 3.1.0-tmo5 ehci_hcd
Nov  8 23:05:54 knummi kernel: [    1.894790] usb usb2: SerialNumber:
0000:00:13.2
Nov  8 23:05:54 knummi kernel: [    1.894872] xhci_hcd 0000:04:00.0:
PCI INT A -> GSI 50 (level, low) -> IRQ 50
Nov  8 23:05:54 knummi kernel: [    1.894966] usb usb2: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    1.894968] usb usb2: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    1.894973] usb usb2: adding 2-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    1.894985] hub 2-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    1.894987] hub 2-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    1.894988] hub 2-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.895056] hub 2-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    1.895113] hub 2-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    1.895114] hub 2-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    1.895116] hub 2-0:1.0: individual
port over-current protection
Nov  8 23:05:54 knummi kernel: [    1.895117] hub 2-0:1.0: power on to
power good time: 20ms
Nov  8 23:05:54 knummi kernel: [    1.895120] hub 2-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    1.895121] hub 2-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    1.900019] ehci_hcd 0000:00:16.2:
PCI INT B -> GSI 23 (level, low) -> IRQ 23
Nov  8 23:05:54 knummi kernel: [    1.900097] ehci_hcd 0000:00:16.2:
EHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.900159] ehci_hcd 0000:00:16.2:
new USB bus registered, assigned bus number 3
Nov  8 23:05:54 knummi kernel: [    1.900241] ehci_hcd 0000:00:16.2:
reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4
Nov  8 23:05:54 knummi kernel: [    1.900244] ehci_hcd 0000:00:16.2:
reset hcc_params a072 thresh 7 uframes 256/512/1024
Nov  8 23:05:54 knummi kernel: [    1.900261] ehci_hcd 0000:00:16.2:
debug port 1
Nov  8 23:05:54 knummi kernel: [    1.900321] ehci_hcd 0000:00:16.2:
reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Nov  8 23:05:54 knummi kernel: [    1.900327] ehci_hcd 0000:00:16.2:
MWI active
Nov  8 23:05:54 knummi kernel: [    1.900329] ehci_hcd 0000:00:16.2:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.900338] ehci_hcd 0000:00:16.2:
irq 23, io mem 0xfe504000
Nov  8 23:05:54 knummi kernel: [    1.900401] ehci_hcd 0000:00:16.2:
reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
Nov  8 23:05:54 knummi kernel: [    1.900406] ehci_hcd 0000:00:16.2:
init command 0010005 (park)=0 ithresh=1 period=512 RUN
Nov  8 23:05:54 knummi kernel: [    1.900418] xhci_hcd 0000:04:00.0:
setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [    1.900421] xhci_hcd 0000:04:00.0:
xHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.900483] xhci_hcd 0000:04:00.0:
new USB bus registered, assigned bus number 4
Nov  8 23:05:54 knummi kernel: [    1.904943] xhci_hcd 0000:04:00.0:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.904950] xhci_hcd 0000:04:00.0:
irq 50, io mem 0xfe300000
Nov  8 23:05:54 knummi kernel: [    1.905054] xhci_hcd 0000:04:00.0:
irq 74 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.905057] xhci_hcd 0000:04:00.0:
irq 75 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.905061] xhci_hcd 0000:04:00.0:
irq 76 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.905065] xhci_hcd 0000:04:00.0:
irq 77 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.905068] xhci_hcd 0000:04:00.0:
irq 78 for MSI/MSI-X
Nov  8 23:05:54 knummi kernel: [    1.905119] usb usb4: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    1.905123] usb usb4: udev 1, busnum
4, minor = 384
Nov  8 23:05:54 knummi kernel: [    1.905124] usb usb4: New USB device
found, idVendor=1d6b, idProduct=0002
Nov  8 23:05:54 knummi kernel: [    1.905187] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    1.905264] usb usb4: Product: xHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    1.905324] usb usb4: Manufacturer:
Linux 3.1.0-tmo5 xhci_hcd
Nov  8 23:05:54 knummi kernel: [    1.905384] usb usb4: SerialNumber:
0000:04:00.0
Nov  8 23:05:54 knummi kernel: [    1.906009] ehci_hcd 0000:00:16.2:
USB 2.0 started, EHCI 1.00
Nov  8 23:05:54 knummi kernel: [    1.906100] usb usb4: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    1.906102] usb usb4: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    1.906104] xHCI xhci_add_endpoint
called for root hub
Nov  8 23:05:54 knummi kernel: [    1.906105] xHCI
xhci_check_bandwidth called for root hub
Nov  8 23:05:54 knummi kernel: [    1.906108] usb usb4: adding 4-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    1.906121] hub 4-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    1.906122] hub 4-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    1.906123] hub 4-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.906183] hub 4-0:1.0: 2 ports detected
Nov  8 23:05:54 knummi kernel: [    1.906241] hub 4-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    1.906242] hub 4-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    1.906243] hub 4-0:1.0: individual
port over-current protection
Nov  8 23:05:54 knummi kernel: [    1.906245] hub 4-0:1.0: Single TT
Nov  8 23:05:54 knummi kernel: [    1.906246] hub 4-0:1.0: TT requires
at most 8 FS bit times (666 ns)
Nov  8 23:05:54 knummi kernel: [    1.906247] hub 4-0:1.0: power on to
power good time: 20ms
Nov  8 23:05:54 knummi kernel: [    1.906249] hub 4-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    1.906251] hub 4-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    1.906283] xhci_hcd 0000:04:00.0:
xHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.906344] xhci_hcd 0000:04:00.0:
new USB bus registered, assigned bus number 5
Nov  8 23:05:54 knummi kernel: [    1.906424] xhci_hcd 0000:04:00.0:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.906434] usb usb5: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    1.906436] usb usb5: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    1.906439] usb usb5: udev 1, busnum
5, minor = 512
Nov  8 23:05:54 knummi kernel: [    1.906440] usb usb5: New USB device
found, idVendor=1d6b, idProduct=0003
Nov  8 23:05:54 knummi kernel: [    1.906503] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    1.906580] usb usb5: Product: xHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    1.906639] usb usb5: Manufacturer:
Linux 3.1.0-tmo5 xhci_hcd
Nov  8 23:05:54 knummi kernel: [    1.906700] usb usb5: SerialNumber:
0000:04:00.0
Nov  8 23:05:54 knummi kernel: [    1.910029] usb usb5: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    1.910030] usb usb5: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    1.910032] xHCI xhci_add_endpoint
called for root hub
Nov  8 23:05:54 knummi kernel: [    1.910033] xHCI
xhci_check_bandwidth called for root hub
Nov  8 23:05:54 knummi kernel: [    1.910036] usb usb5: adding 5-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    1.910048] hub 5-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    1.910049] hub 5-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    1.910050] hub 5-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.910110] hub 5-0:1.0: 2 ports detected
Nov  8 23:05:54 knummi kernel: [    1.910168] hub 5-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    1.910169] hub 5-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    1.910170] hub 5-0:1.0: individual
port over-current protection
Nov  8 23:05:54 knummi kernel: [    1.910171] hub 5-0:1.0: TT requires
at most 8 FS bit times (666 ns)
Nov  8 23:05:54 knummi kernel: [    1.910173] hub 5-0:1.0: power on to
power good time: 20ms
Nov  8 23:05:54 knummi kernel: [    1.910175] hub 5-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    1.910176] hub 5-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    1.910206] usb usb3: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    1.910210] usb usb3: udev 1, busnum
3, minor = 256
Nov  8 23:05:54 knummi kernel: [    1.910211] usb usb3: New USB device
found, idVendor=1d6b, idProduct=0002
Nov  8 23:05:54 knummi kernel: [    1.910274] usb usb3: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    1.910351] usb usb3: Product: EHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    1.910410] usb usb3: Manufacturer:
Linux 3.1.0-tmo5 ehci_hcd
Nov  8 23:05:54 knummi kernel: [    1.910471] usb usb3: SerialNumber:
0000:00:16.2
Nov  8 23:05:54 knummi kernel: [    1.910571] usb usb3: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    1.910573] usb usb3: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    1.910576] usb usb3: adding 3-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    1.910588] hub 3-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    1.910589] hub 3-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    1.910591] hub 3-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.910649] hub 3-0:1.0: 4 ports detected
Nov  8 23:05:54 knummi kernel: [    1.910707] hub 3-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    1.910708] hub 3-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    1.910709] hub 3-0:1.0: individual
port over-current protection
Nov  8 23:05:54 knummi kernel: [    1.910710] hub 3-0:1.0: power on to
power good time: 20ms
Nov  8 23:05:54 knummi kernel: [    1.910712] hub 3-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    1.910714] hub 3-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    1.913035] ohci_hcd 0000:00:12.0:
PCI INT A -> GSI 18 (level, low) -> IRQ 18
Nov  8 23:05:54 knummi kernel: [    1.913110] ohci_hcd 0000:00:12.0:
OHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.913178] ohci_hcd 0000:00:12.0:
new USB bus registered, assigned bus number 6
Nov  8 23:05:54 knummi kernel: [    1.913264] QUIRK: Enable AMD PLL fix
Nov  8 23:05:54 knummi kernel: [    1.913266] ohci_hcd 0000:00:12.0:
enabled AMD prefetch quirk
Nov  8 23:05:54 knummi kernel: [    1.913277] ohci_hcd 0000:00:12.0:
created debug files
Nov  8 23:05:54 knummi kernel: [    1.913278] ohci_hcd 0000:00:12.0:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.913287] ohci_hcd 0000:00:12.0:
irq 18, io mem 0xfe50a000
Nov  8 23:05:54 knummi kernel: [    1.968026] ohci_hcd 0000:00:12.0:
OHCI controller state
Nov  8 23:05:54 knummi kernel: [    1.968028] ohci_hcd 0000:00:12.0:
OHCI 1.0, NO legacy support registers
Nov  8 23:05:54 knummi kernel: [    1.968031] ohci_hcd 0000:00:12.0:
control 0x283 RWC HCFS=operational CBSR=3
Nov  8 23:05:54 knummi kernel: [    1.968034] ohci_hcd 0000:00:12.0:
cmdstatus 0x00000 SOC=0
Nov  8 23:05:54 knummi kernel: [    1.968037] ohci_hcd 0000:00:12.0:
intrstatus 0x00000004 SF
Nov  8 23:05:54 knummi kernel: [    1.968040] ohci_hcd 0000:00:12.0:
intrenable 0x8000005a MIE RHSC UE RD WDH
Nov  8 23:05:54 knummi kernel: [    1.968047] ohci_hcd 0000:00:12.0:
hcca frame #0005
Nov  8 23:05:54 knummi kernel: [    1.968050] ohci_hcd 0000:00:12.0:
roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
Nov  8 23:05:54 knummi kernel: [    1.968053] ohci_hcd 0000:00:12.0:
roothub.b 00000000 PPCM=0000 DR=0000
Nov  8 23:05:54 knummi kernel: [    1.968055] ohci_hcd 0000:00:12.0:
roothub.status 00008000 DRWE
Nov  8 23:05:54 knummi kernel: [    1.968058] ohci_hcd 0000:00:12.0:
roothub.portstatus [0] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    1.968061] ohci_hcd 0000:00:12.0:
roothub.portstatus [1] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    1.968064] ohci_hcd 0000:00:12.0:
roothub.portstatus [2] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    1.968067] ohci_hcd 0000:00:12.0:
roothub.portstatus [3] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    1.968070] ohci_hcd 0000:00:12.0:
roothub.portstatus [4] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    1.968075] usb usb6: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    1.968078] usb usb6: udev 1, busnum
6, minor = 640
Nov  8 23:05:54 knummi kernel: [    1.968080] usb usb6: New USB device
found, idVendor=1d6b, idProduct=0001
Nov  8 23:05:54 knummi kernel: [    1.968143] usb usb6: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    1.968220] usb usb6: Product: OHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    1.968279] usb usb6: Manufacturer:
Linux 3.1.0-tmo5 ohci_hcd
Nov  8 23:05:54 knummi kernel: [    1.968339] usb usb6: SerialNumber:
0000:00:12.0
Nov  8 23:05:54 knummi kernel: [    1.968451] usb usb6: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    1.968452] usb usb6: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    1.968456] usb usb6: adding 6-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    1.968468] hub 6-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    1.968469] hub 6-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    1.968470] hub 6-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.968530] hub 6-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    1.968588] hub 6-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    1.968589] hub 6-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    1.968590] hub 6-0:1.0: no
over-current protection
Nov  8 23:05:54 knummi kernel: [    1.968591] hub 6-0:1.0: power on to
power good time: 4ms
Nov  8 23:05:54 knummi kernel: [    1.968595] hub 6-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    1.968596] hub 6-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    1.968623] ehci_hcd 0000:00:12.2:
HS companion for 0000:00:12.0
Nov  8 23:05:54 knummi kernel: [    1.972023] ohci_hcd 0000:00:13.0:
PCI INT A -> GSI 20 (level, low) -> IRQ 20
Nov  8 23:05:54 knummi kernel: [    1.972092] ohci_hcd 0000:00:13.0:
OHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    1.972154] ohci_hcd 0000:00:13.0:
new USB bus registered, assigned bus number 7
Nov  8 23:05:54 knummi kernel: [    1.972234] ohci_hcd 0000:00:13.0:
enabled AMD prefetch quirk
Nov  8 23:05:54 knummi kernel: [    1.972243] ohci_hcd 0000:00:13.0:
created debug files
Nov  8 23:05:54 knummi kernel: [    1.972244] ohci_hcd 0000:00:13.0:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    1.972252] ohci_hcd 0000:00:13.0:
irq 20, io mem 0xfe508000
Nov  8 23:05:54 knummi kernel: [    2.010118] hub 1-0:1.0: state 7
ports 5 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.010122] hub 4-0:1.0: port 1:
status 0101 change 0001
Nov  8 23:05:54 knummi kernel: [    2.010124] hub 2-0:1.0: state 7
ports 5 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.010130] hub 4-0:1.0: port 2:
status 0101 change 0001
Nov  8 23:05:54 knummi kernel: [    2.010180] hub 5-0:1.0: state 7
ports 2 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.010182] hub 3-0:1.0: state 7
ports 4 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.015241] md: bind<sdc2>
Nov  8 23:05:54 knummi kernel: [    2.016921] md: bind<sdc3>
Nov  8 23:05:54 knummi kernel: [    2.018425] md: bind<sdc1>
Nov  8 23:05:54 knummi kernel: [    2.027022] ohci_hcd 0000:00:13.0:
OHCI controller state
Nov  8 23:05:54 knummi kernel: [    2.027025] ohci_hcd 0000:00:13.0:
OHCI 1.0, NO legacy support registers
Nov  8 23:05:54 knummi kernel: [    2.027028] ohci_hcd 0000:00:13.0:
control 0x283 RWC HCFS=operational CBSR=3
Nov  8 23:05:54 knummi kernel: [    2.027031] ohci_hcd 0000:00:13.0:
cmdstatus 0x00000 SOC=0
Nov  8 23:05:54 knummi kernel: [    2.027033] ohci_hcd 0000:00:13.0:
intrstatus 0x00000004 SF
Nov  8 23:05:54 knummi kernel: [    2.027036] ohci_hcd 0000:00:13.0:
intrenable 0x8000005a MIE RHSC UE RD WDH
Nov  8 23:05:54 knummi kernel: [    2.027043] ohci_hcd 0000:00:13.0:
hcca frame #0005
Nov  8 23:05:54 knummi kernel: [    2.027046] ohci_hcd 0000:00:13.0:
roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5)
Nov  8 23:05:54 knummi kernel: [    2.027049] ohci_hcd 0000:00:13.0:
roothub.b 00000000 PPCM=0000 DR=0000
Nov  8 23:05:54 knummi kernel: [    2.027051] ohci_hcd 0000:00:13.0:
roothub.status 00008000 DRWE
Nov  8 23:05:54 knummi kernel: [    2.027054] ohci_hcd 0000:00:13.0:
roothub.portstatus [0] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.027057] ohci_hcd 0000:00:13.0:
roothub.portstatus [1] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.027060] ohci_hcd 0000:00:13.0:
roothub.portstatus [2] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.027063] ohci_hcd 0000:00:13.0:
roothub.portstatus [3] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.027065] ohci_hcd 0000:00:13.0:
roothub.portstatus [4] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.027073] usb usb7: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    2.027076] usb usb7: udev 1, busnum
7, minor = 768
Nov  8 23:05:54 knummi kernel: [    2.027077] usb usb7: New USB device
found, idVendor=1d6b, idProduct=0001
Nov  8 23:05:54 knummi kernel: [    2.027141] usb usb7: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    2.027219] usb usb7: Product: OHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    2.027278] usb usb7: Manufacturer:
Linux 3.1.0-tmo5 ohci_hcd
Nov  8 23:05:54 knummi kernel: [    2.027336] md: bind<sdb3>
Nov  8 23:05:54 knummi kernel: [    2.027396] usb usb7: SerialNumber:
0000:00:13.0
Nov  8 23:05:54 knummi kernel: [    2.027506] usb usb7: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.027508] usb usb7: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.027511] usb usb7: adding 7-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.027522] hub 7-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.027523] hub 7-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.027524] hub 7-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.027590] hub 7-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    2.027651] hub 7-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    2.027652] hub 7-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    2.027653] hub 7-0:1.0: no
over-current protection
Nov  8 23:05:54 knummi kernel: [    2.027654] hub 7-0:1.0: power on to
power good time: 4ms
Nov  8 23:05:54 knummi kernel: [    2.027658] hub 7-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    2.027659] hub 7-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    2.027688] ehci_hcd 0000:00:13.2:
HS companion for 0000:00:13.0
Nov  8 23:05:54 knummi kernel: [    2.028417] ohci_hcd 0000:00:14.5:
PCI INT C -> GSI 18 (level, low) -> IRQ 18
Nov  8 23:05:54 knummi kernel: [    2.028488] ohci_hcd 0000:00:14.5:
OHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    2.028552] ohci_hcd 0000:00:14.5:
new USB bus registered, assigned bus number 8
Nov  8 23:05:54 knummi kernel: [    2.028578] bio: create slab <bio-1> at 1
Nov  8 23:05:54 knummi kernel: [    2.028617] md/raid1:md2: active
with 2 out of 2 mirrors
Nov  8 23:05:54 knummi kernel: [    2.028632] md2: detected capacity
change from 0 to 8184070144
Nov  8 23:05:54 knummi kernel: [    2.028808] ohci_hcd 0000:00:14.5:
enabled AMD prefetch quirk
Nov  8 23:05:54 knummi kernel: [    2.028822] ohci_hcd 0000:00:14.5:
created debug files
Nov  8 23:05:54 knummi kernel: [    2.028823] ohci_hcd 0000:00:14.5:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    2.028826] ohci_hcd 0000:00:14.5:
irq 18, io mem 0xfe506000
Nov  8 23:05:54 knummi kernel: [    2.029936] md: bind<sdb1>
Nov  8 23:05:54 knummi kernel: [    2.031098] md/raid1:md0: active
with 2 out of 2 mirrors
Nov  8 23:05:54 knummi kernel: [    2.031210] md0: detected capacity
change from 0 to 2006843392
Nov  8 23:05:54 knummi kernel: [    2.031766]  md2: unknown partition table
Nov  8 23:05:54 knummi kernel: [    2.033700]  md0: unknown partition table
Nov  8 23:05:54 knummi kernel: [    2.068024] hub 6-0:1.0: state 7
ports 5 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.083023] ohci_hcd 0000:00:14.5:
OHCI controller state
Nov  8 23:05:54 knummi kernel: [    2.083025] ohci_hcd 0000:00:14.5:
OHCI 1.0, NO legacy support registers
Nov  8 23:05:54 knummi kernel: [    2.083028] ohci_hcd 0000:00:14.5:
control 0x283 RWC HCFS=operational CBSR=3
Nov  8 23:05:54 knummi kernel: [    2.083030] ohci_hcd 0000:00:14.5:
cmdstatus 0x00000 SOC=0
Nov  8 23:05:54 knummi kernel: [    2.083033] ohci_hcd 0000:00:14.5:
intrstatus 0x00000004 SF
Nov  8 23:05:54 knummi kernel: [    2.083036] ohci_hcd 0000:00:14.5:
intrenable 0x8000005a MIE RHSC UE RD WDH
Nov  8 23:05:54 knummi kernel: [    2.083043] ohci_hcd 0000:00:14.5:
hcca frame #0005
Nov  8 23:05:54 knummi kernel: [    2.083046] ohci_hcd 0000:00:14.5:
roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
Nov  8 23:05:54 knummi kernel: [    2.083049] ohci_hcd 0000:00:14.5:
roothub.b 00000000 PPCM=0000 DR=0000
Nov  8 23:05:54 knummi kernel: [    2.083051] ohci_hcd 0000:00:14.5:
roothub.status 00008000 DRWE
Nov  8 23:05:54 knummi kernel: [    2.083054] ohci_hcd 0000:00:14.5:
roothub.portstatus [0] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.083057] ohci_hcd 0000:00:14.5:
roothub.portstatus [1] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.083061] usb usb8: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    2.083065] usb usb8: udev 1, busnum
8, minor = 896
Nov  8 23:05:54 knummi kernel: [    2.083066] usb usb8: New USB device
found, idVendor=1d6b, idProduct=0001
Nov  8 23:05:54 knummi kernel: [    2.083129] usb usb8: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    2.083206] usb usb8: Product: OHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    2.083265] usb usb8: Manufacturer:
Linux 3.1.0-tmo5 ohci_hcd
Nov  8 23:05:54 knummi kernel: [    2.083326] usb usb8: SerialNumber:
0000:00:14.5
Nov  8 23:05:54 knummi kernel: [    2.083495] usb usb8: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.083496] usb usb8: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.083499] usb usb8: adding 8-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.083510] hub 8-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.083511] hub 8-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.083512] hub 8-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.083572] hub 8-0:1.0: 2 ports detected
Nov  8 23:05:54 knummi kernel: [    2.083630] hub 8-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    2.083631] hub 8-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    2.083632] hub 8-0:1.0: no
over-current protection
Nov  8 23:05:54 knummi kernel: [    2.083633] hub 8-0:1.0: power on to
power good time: 4ms
Nov  8 23:05:54 knummi kernel: [    2.083636] hub 8-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    2.083637] hub 8-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    2.086023] ohci_hcd 0000:00:16.0:
PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov  8 23:05:54 knummi kernel: [    2.086093] ohci_hcd 0000:00:16.0:
OHCI Host Controller
Nov  8 23:05:54 knummi kernel: [    2.086155] ohci_hcd 0000:00:16.0:
new USB bus registered, assigned bus number 9
Nov  8 23:05:54 knummi kernel: [    2.086235] ohci_hcd 0000:00:16.0:
enabled AMD prefetch quirk
Nov  8 23:05:54 knummi kernel: [    2.086245] ohci_hcd 0000:00:16.0:
created debug files
Nov  8 23:05:54 knummi kernel: [    2.086246] ohci_hcd 0000:00:16.0:
supports USB remote wakeup
Nov  8 23:05:54 knummi kernel: [    2.086254] ohci_hcd 0000:00:16.0:
irq 22, io mem 0xfe505000
Nov  8 23:05:54 knummi kernel: [    2.110028] hub 4-0:1.0: state 7
ports 2 chg 0006 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.110037] hub 4-0:1.0: port 1,
status 0101, change 0000, 12 Mb/s
Nov  8 23:05:54 knummi kernel: [    2.141045] ohci_hcd 0000:00:16.0:
OHCI controller state
Nov  8 23:05:54 knummi kernel: [    2.141047] ohci_hcd 0000:00:16.0:
OHCI 1.0, NO legacy support registers
Nov  8 23:05:54 knummi kernel: [    2.141050] ohci_hcd 0000:00:16.0:
control 0x283 RWC HCFS=operational CBSR=3
Nov  8 23:05:54 knummi kernel: [    2.141053] ohci_hcd 0000:00:16.0:
cmdstatus 0x00000 SOC=0
Nov  8 23:05:54 knummi kernel: [    2.141055] ohci_hcd 0000:00:16.0:
intrstatus 0x00000004 SF
Nov  8 23:05:54 knummi kernel: [    2.141058] ohci_hcd 0000:00:16.0:
intrenable 0x8000005a MIE RHSC UE RD WDH
Nov  8 23:05:54 knummi kernel: [    2.141066] ohci_hcd 0000:00:16.0:
hcca frame #0005
Nov  8 23:05:54 knummi kernel: [    2.141069] ohci_hcd 0000:00:16.0:
roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4)
Nov  8 23:05:54 knummi kernel: [    2.141071] ohci_hcd 0000:00:16.0:
roothub.b 00000000 PPCM=0000 DR=0000
Nov  8 23:05:54 knummi kernel: [    2.141074] ohci_hcd 0000:00:16.0:
roothub.status 00008000 DRWE
Nov  8 23:05:54 knummi kernel: [    2.141077] ohci_hcd 0000:00:16.0:
roothub.portstatus [0] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.141080] ohci_hcd 0000:00:16.0:
roothub.portstatus [1] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.141082] ohci_hcd 0000:00:16.0:
roothub.portstatus [2] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.141085] ohci_hcd 0000:00:16.0:
roothub.portstatus [3] 0x00000100 PPS
Nov  8 23:05:54 knummi kernel: [    2.141090] usb usb9: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    2.141093] usb usb9: udev 1, busnum
9, minor = 1024
Nov  8 23:05:54 knummi kernel: [    2.141095] usb usb9: New USB device
found, idVendor=1d6b, idProduct=0001
Nov  8 23:05:54 knummi kernel: [    2.141158] usb usb9: New USB device
strings: Mfr=3, Product=2, SerialNumber=1
Nov  8 23:05:54 knummi kernel: [    2.141235] usb usb9: Product: OHCI
Host Controller
Nov  8 23:05:54 knummi kernel: [    2.141294] usb usb9: Manufacturer:
Linux 3.1.0-tmo5 ohci_hcd
Nov  8 23:05:54 knummi kernel: [    2.141355] usb usb9: SerialNumber:
0000:00:16.0
Nov  8 23:05:54 knummi kernel: [    2.141464] usb usb9: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.141466] usb usb9: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.141469] usb usb9: adding 9-0:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.141479] hub 9-0:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.141481] hub 9-0:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.141482] hub 9-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.141542] hub 9-0:1.0: 4 ports detected
Nov  8 23:05:54 knummi kernel: [    2.141599] hub 9-0:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    2.141600] hub 9-0:1.0: no power
switching (usb 1.0)
Nov  8 23:05:54 knummi kernel: [    2.141602] hub 9-0:1.0: no
over-current protection
Nov  8 23:05:54 knummi kernel: [    2.141603] hub 9-0:1.0: power on to
power good time: 4ms
Nov  8 23:05:54 knummi kernel: [    2.141606] hub 9-0:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    2.141607] hub 9-0:1.0: trying to
enable port power on non-switchable hub
Nov  8 23:05:54 knummi kernel: [    2.141639] ehci_hcd 0000:00:16.2:
HS companion for 0000:00:16.0
Nov  8 23:05:54 knummi kernel: [    2.143049] [drm] nouveau
0000:01:00.0: 3 available performance level(s)
Nov  8 23:05:54 knummi kernel: [    2.143113] [drm] nouveau
0000:01:00.0: 0: memory 135MHz core 50MHz shader 101MHz voltage 880mV
timing 0
Nov  8 23:05:54 knummi kernel: [    2.143195] [drm] nouveau
0000:01:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 900mV
timing 1
Nov  8 23:05:54 knummi kernel: [    2.143277] [drm] nouveau
0000:01:00.0: 3: memory 800MHz core 700MHz shader 1400MHz voltage
990mV timing 2
Nov  8 23:05:54 knummi kernel: [    2.144736] [TTM] Zone  kernel:
Available graphics memory: 4103680 kiB.
Nov  8 23:05:54 knummi kernel: [    2.144799] [TTM] Zone   dma32:
Available graphics memory: 2097152 kiB.
Nov  8 23:05:54 knummi kernel: [    2.144861] [TTM] Initializing pool
allocator.
Nov  8 23:05:54 knummi kernel: [    2.144925] [drm] nouveau
0000:01:00.0: Detected 512MiB VRAM
Nov  8 23:05:54 knummi kernel: [    2.148292] [drm] nouveau
0000:01:00.0: 512 MiB GART (aperture)
Nov  8 23:05:54 knummi kernel: [    2.151292] [drm] Supports vblank
timestamp caching Rev 1 (10.10.2010).
Nov  8 23:05:54 knummi kernel: [    2.151382] [drm] No driver support
for vblank timestamp query.
Nov  8 23:05:54 knummi kernel: [    2.161033] hub 4-0:1.0: port 1 not
reset yet, waiting 50ms
Nov  8 23:05:54 knummi kernel: [    2.263034] usb 4-1: new low speed
USB device number 2 using xhci_hcd
Nov  8 23:05:54 knummi kernel: [    2.280034] usb 4-1: skipped 1
descriptor after interface
Nov  8 23:05:54 knummi kernel: [    2.280349] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.280447] usb 4-1: default  
language 0x0409
Nov  8 23:05:54 knummi kernel: [    2.281754] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.282572] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.282677] usb 4-1: udev 2, busnum
4, minor = 385
Nov  8 23:05:54 knummi kernel: [    2.282679] usb 4-1: New USB device
found, idVendor=046d, idProduct=c01b
Nov  8 23:05:54 knummi kernel: [    2.282771] usb 4-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=0
Nov  8 23:05:54 knummi kernel: [    2.282867] usb 4-1: Product:
USB-PS/2 Optical Mouse
Nov  8 23:05:54 knummi kernel: [    2.282960] usb 4-1:  
Manufacturer: Logitech
Nov  8 23:05:54 knummi kernel: [    2.283116] usb 4-1: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.283119] usb 4-1: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.283125] usb 4-1: ep 0x81 -
rounding interval to 64 microframes, ep desc says 80 microframes
Nov  8 23:05:54 knummi kernel: [    2.284083] usb 4-1: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    2.284389] usb 4-1: adding 4-1:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.284429] hub 4-0:1.0: port 2,
status 0101, change 0000, 12 Mb/s
Nov  8 23:05:54 knummi kernel: [    2.286078] usbhid 4-1:1.0:
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.286080] usbhid 4-1:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.288059] md: bind<sdb2>
Nov  8 23:05:54 knummi kernel: [    2.289070] input: Logitech USB-PS/2
Optical Mouse as
/devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-1/4-1:1.0/input/input3
Nov  8 23:05:54 knummi kernel: [    2.289259] generic-usb
0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech
USB-PS/2 Optical Mouse] on usb-0000:04:00.0-1/input0
Nov  8 23:05:54 knummi kernel: [    2.289393] usbcore: registered new
interface driver usbhid
Nov  8 23:05:54 knummi kernel: [    2.289486] usbhid: USB HID core driver
Nov  8 23:05:54 knummi kernel: [    2.335025] hub 4-0:1.0: port 2 not
reset yet, waiting 50ms
Nov  8 23:05:54 knummi kernel: [    2.341703] [drm] nouveau
0000:01:00.0: allocated 1920x1200 fb: 0x1a0000, bo ffff88021edc9800
Nov  8 23:05:54 knummi kernel: [    2.341852] fbcon: nouveaufb (fb0)
is primary device
Nov  8 23:05:54 knummi kernel: [    2.382433] Console: switching to
colour frame buffer device 240x75
Nov  8 23:05:54 knummi kernel: [    2.382513] md/raid1:md1: active
with 2 out of 2 mirrors
Nov  8 23:05:54 knummi kernel: [    2.382530] md1: detected capacity
change from 0 to 990011064320
Nov  8 23:05:54 knummi kernel: [    2.385164]  md1: unknown partition table
Nov  8 23:05:54 knummi kernel: [    2.385325] fb0: nouveaufb frame
buffer device
Nov  8 23:05:54 knummi kernel: [    2.385336] drm: registered panic notifier
Nov  8 23:05:54 knummi kernel: [    2.385349] [drm] Initialized
nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Nov  8 23:05:54 knummi kernel: [    2.438061] usb 4-2: new high speed
USB device number 3 using xhci_hcd
Nov  8 23:05:54 knummi kernel: [    2.452158] usb 4-2: udev 3, busnum
4, minor = 386
Nov  8 23:05:54 knummi kernel: [    2.452160] usb 4-2: New USB device
found, idVendor=04b4, idProduct=6560
Nov  8 23:05:54 knummi kernel: [    2.452169] usb 4-2: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Nov  8 23:05:54 knummi kernel: [    2.452221] usb 4-2: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.452223] usb 4-2: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.453077] usb 4-2: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    2.453124] usb 4-2: adding 4-2:1.0
(config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.453143] hub 4-2:1.0:  
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.453145] hub 4-2:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.453146] hub 4-2:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.453165] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.453196] hub 4-2:1.0: 4 ports detected
Nov  8 23:05:54 knummi kernel: [    2.453200] hub 4-2:1.0: standalone hub
Nov  8 23:05:54 knummi kernel: [    2.453202] hub 4-2:1.0: individual
port power switching
Nov  8 23:05:54 knummi kernel: [    2.453203] hub 4-2:1.0: individual
port over-current protection
Nov  8 23:05:54 knummi kernel: [    2.454306] usb 4-2: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    2.454357] hub 4-2:1.0: TT per port
Nov  8 23:05:54 knummi kernel: [    2.454359] hub 4-2:1.0: TT requires
at most 8 FS bit times (666 ns)
Nov  8 23:05:54 knummi kernel: [    2.454360] hub 4-2:1.0: Port
indicators are supported
Nov  8 23:05:54 knummi kernel: [    2.454362] hub 4-2:1.0: power on to
power good time: 100ms
Nov  8 23:05:54 knummi kernel: [    2.454712] usb 4-2: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    2.454752] hub 4-2:1.0: local power
source is good
Nov  8 23:05:54 knummi kernel: [    2.454754] hub 4-2:1.0: enabling
power on all ports
Nov  8 23:05:54 knummi kernel: [    2.454926] hub 7-0:1.0: state 7
ports 5 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.454928] hub 8-0:1.0: state 7
ports 2 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.454930] hub 9-0:1.0: state 7
ports 4 chg 0000 evt 0000
Nov  8 23:05:54 knummi kernel: [    2.554054] hub 4-2:1.0: port 1:
status 0301 change 0001
Nov  8 23:05:54 knummi kernel: [    2.554168] hub 4-2:1.0: port 3:
status 0101 change 0001
Nov  8 23:05:54 knummi kernel: [    2.554248] hub 4-2:1.0: port 4:
status 0101 change 0001
Nov  8 23:05:54 knummi kernel: [    2.563566] md: linear personality
registered for level -1
Nov  8 23:05:54 knummi kernel: [    2.564576] md: multipath
personality registered for level -4
Nov  8 23:05:54 knummi kernel: [    2.565611] md: raid0 personality
registered for level 0
Nov  8 23:05:54 knummi kernel: [    2.567535] async_tx: api
initialized (async)
Nov  8 23:05:54 knummi kernel: [    2.584042] raid6: int64x1   2906 MB/s
Nov  8 23:05:54 knummi kernel: [    2.601037] raid6: int64x2   4109 MB/s
Nov  8 23:05:54 knummi kernel: [    2.618040] raid6: int64x4   2984 MB/s
Nov  8 23:05:54 knummi kernel: [    2.635043] raid6: int64x8   2679 MB/s
Nov  8 23:05:54 knummi kernel: [    2.652038] raid6: sse2x1    4714 MB/s
Nov  8 23:05:54 knummi kernel: [    2.655043] hub 4-2:1.0: state 7
ports 4 chg 001a evt 0000
Nov  8 23:05:54 knummi kernel: [    2.655079] hub 4-2:1.0: port 1,
status 0301, change 0000, 1.5 Mb/s
Nov  8 23:05:54 knummi kernel: [    2.669026] raid6: sse2x2    7789 MB/s
Nov  8 23:05:54 knummi kernel: [    2.686025] raid6: sse2x4    9007 MB/s
Nov  8 23:05:54 knummi kernel: [    2.686028] raid6: using algorithm
sse2x4 (9007 MB/s)
Nov  8 23:05:54 knummi kernel: [    2.686214] xor: automatically using
best checksumming function: generic_sse
Nov  8 23:05:54 knummi kernel: [    2.691024]    generic_sse:  
13932.000 MB/sec
Nov  8 23:05:54 knummi kernel: [    2.691028] xor: using function:
generic_sse (13932.000 MB/sec)
Nov  8 23:05:54 knummi kernel: [    2.691432] md: raid6 personality
registered for level 6
Nov  8 23:05:54 knummi kernel: [    2.691437] md: raid5 personality
registered for level 5
Nov  8 23:05:54 knummi kernel: [    2.691441] md: raid4 personality
registered for level 4
Nov  8 23:05:54 knummi kernel: [    2.694513] md: raid10 personality
registered for level 10
Nov  8 23:05:54 knummi kernel: [    2.718088] usb 4-2.1: new low speed
USB device number 4 using xhci_hcd
Nov  8 23:05:54 knummi kernel: [    2.739791] usb 4-2.1: skipped 1
descriptor after interface
Nov  8 23:05:54 knummi kernel: [    2.739794] usb 4-2.1: skipped 1
descriptor after interface
Nov  8 23:05:54 knummi kernel: [    2.740048] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.740141] usb 4-2.1: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    2.742099] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.742762] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.742824] usb 4-2.1: udev 4,
busnum 4, minor = 387
Nov  8 23:05:54 knummi kernel: [    2.742825] usb 4-2.1: New USB
device found, idVendor=0111, idProduct=0111
Nov  8 23:05:54 knummi kernel: [    2.742831] usb 4-2.1: New USB
device strings: Mfr=1, Product=2, SerialNumber=0
Nov  8 23:05:54 knummi kernel: [    2.742836] usb 4-2.1: Product:
PS/2-Cable To USB Converter V:2.2
Nov  8 23:05:54 knummi kernel: [    2.742840] usb 4-2.1: Manufacturer: 607
Nov  8 23:05:54 knummi kernel: [    2.742922] usb 4-2.1: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.742924] usb 4-2.1: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.742930] usb 4-2.1: ep 0x81 -
rounding interval to 64 microframes, ep desc says 80 microframes
Nov  8 23:05:54 knummi kernel: [    2.742939] usb 4-2.1: ep 0x82 -
rounding interval to 64 microframes, ep desc says 80 microframes
Nov  8 23:05:54 knummi kernel: [    2.744145] usb 4-2.1: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    2.744360] usb 4-2.1: adding
4-2.1:1.0 (config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.745332] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    2.745438] usbhid 4-2.1:1.0:
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.745439] usbhid 4-2.1:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.748013] input: 607 PS/2-Cable To
USB Converter V:2.2 as
/devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-2/4-2.1/4-2.1:1.0/input/input4
Nov  8 23:05:54 knummi kernel: [    2.748085] generic-usb
0003:0111:0111.0002: input,hidraw1: USB HID v1.00 Keyboard [607
PS/2-Cable To USB Converter V:2.2] on usb-0000:04:00.0-2.1/input0
Nov  8 23:05:54 knummi kernel: [    2.748103] usb 4-2.1: adding
4-2.1:1.1 (config #1, interface 1)
Nov  8 23:05:54 knummi kernel: [    2.748118] usbhid 4-2.1:1.1:
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [    2.748119] usbhid 4-2.1:1.1:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [    2.750943] input: 607 PS/2-Cable To
USB Converter V:2.2 as
/devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-2/4-2.1/4-2.1:1.1/input/input5
Nov  8 23:05:54 knummi kernel: [    2.751028] generic-usb
0003:0111:0111.0003: input,hidraw2: USB HID v1.10 Joystick [607
PS/2-Cable To USB Converter V:2.2] on usb-0000:04:00.0-2.1/input1
Nov  8 23:05:54 knummi kernel: [    2.751079] hub 4-2:1.0: port 3,
status 0101, change 0000, 12 Mb/s
Nov  8 23:05:54 knummi kernel: [    2.813073] usb 4-2.3: new full
speed USB device number 5 using xhci_hcd
Nov  8 23:05:54 knummi kernel: [    2.874025] usb 4-2.3: skipped 1
descriptor after interface
Nov  8 23:05:54 knummi kernel: [    2.874027] usb 4-2.3: udev 5,
busnum 4, minor = 388
Nov  8 23:05:54 knummi kernel: [    2.874029] usb 4-2.3: New USB
device found, idVendor=0a12, idProduct=0001
Nov  8 23:05:54 knummi kernel: [    2.874035] usb 4-2.3: New USB
device strings: Mfr=0, Product=0, SerialNumber=0
Nov  8 23:05:54 knummi kernel: [    2.874099] usb 4-2.3: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    2.874101] usb 4-2.3: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    2.876061] usb 4-2.3: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    2.877319] usb 4-2.3: adding
4-2.3:1.0 (config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    2.877357] usb 4-2.3: adding
4-2.3:1.1 (config #1, interface 1)
Nov  8 23:05:54 knummi kernel: [    2.877377] usb 4-2.3: adding
4-2.3:1.2 (config #1, interface 2)
Nov  8 23:05:54 knummi kernel: [    2.877416] hub 4-2:1.0: port 4,
status 0101, change 0000, 12 Mb/s
Nov  8 23:05:54 knummi kernel: [    2.939074] usb 4-2.4: new high
speed USB device number 6 using xhci_hcd
Nov  8 23:05:54 knummi kernel: [    3.167171] usb 4-2.4: skipped 1
descriptor after configuration
Nov  8 23:05:54 knummi kernel: [    3.167173] usb 4-2.4: skipped 8
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167175] usb 4-2.4: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    3.167177] usb 4-2.4: skipped 43
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167181] usb 4-2.4: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    3.167183] usb 4-2.4: skipped 4
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167184] usb 4-2.4: skipped 2
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167185] usb 4-2.4: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    3.167187] usb 4-2.4: skipped 2
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167188] usb 4-2.4: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    3.167189] usb 4-2.4: skipped 2
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167191] usb 4-2.4: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    3.167192] usb 4-2.4: skipped 2
descriptors after interface
Nov  8 23:05:54 knummi kernel: [    3.167193] usb 4-2.4: skipped 1
descriptor after endpoint
Nov  8 23:05:54 knummi kernel: [    3.168313] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    3.168942] usb 4-2.4: default
language 0x0409
Nov  8 23:05:54 knummi kernel: [    3.171119] xhci_hcd 0000:04:00.0:
WARN: short transfer on control ep
Nov  8 23:05:54 knummi kernel: [    3.171709] usb 4-2.4: udev 6,
busnum 4, minor = 389
Nov  8 23:05:54 knummi kernel: [    3.171711] usb 4-2.4: New USB
device found, idVendor=046d, idProduct=0825
Nov  8 23:05:54 knummi kernel: [    3.171718] usb 4-2.4: New USB
device strings: Mfr=0, Product=0, SerialNumber=2
Nov  8 23:05:54 knummi kernel: [    3.171722] usb 4-2.4: SerialNumber:
C6CC2D90
Nov  8 23:05:54 knummi kernel: [    3.171786] usb 4-2.4: usb_probe_device
Nov  8 23:05:54 knummi kernel: [    3.171787] usb 4-2.4: configuration
#1 chosen from 1 choice
Nov  8 23:05:54 knummi kernel: [    3.172746] usb 4-2.4: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [    3.172788] usb 4-2.4: adding
4-2.4:1.0 (config #1, interface 0)
Nov  8 23:05:54 knummi kernel: [    3.172816] usb 4-2.4: adding
4-2.4:1.1 (config #1, interface 1)
Nov  8 23:05:54 knummi kernel: [    3.172829] usb 4-2.4: adding
4-2.4:1.2 (config #1, interface 2)
Nov  8 23:05:54 knummi kernel: [    3.172842] usb 4-2.4: adding
4-2.4:1.3 (config #1, interface 3)
Nov  8 23:05:54 knummi kernel: [    3.172866] hub 4-2:1.0: state 7
ports 4 chg 0000 evt 0010
Nov  8 23:05:54 knummi kernel: [    3.204063] ohci_hcd 0000:00:12.0:
auto-stop root hub
Nov  8 23:05:54 knummi kernel: [    3.204078] ohci_hcd 0000:00:13.0:
auto-stop root hub
Nov  8 23:05:54 knummi kernel: [    3.204087] ohci_hcd 0000:00:14.5:
auto-stop root hub
Nov  8 23:05:54 knummi kernel: [    3.204099] ohci_hcd 0000:00:16.0:
auto-stop root hub
Nov  8 23:05:54 knummi kernel: [    7.773853] EXT4-fs (md1): mounted
filesystem with ordered data mode. Opts: (null)
Nov  8 23:05:54 knummi kernel: [    9.962309] udev[474]: starting  
version 163
Nov  8 23:05:54 knummi kernel: [   11.085439] Bluetooth: Core ver 2.16
Nov  8 23:05:54 knummi kernel: [   11.085456] NET: Registered protocol
family 31
Nov  8 23:05:54 knummi kernel: [   11.085457] Bluetooth: HCI device
and connection manager initialized
Nov  8 23:05:54 knummi kernel: [   11.085459] Bluetooth: HCI socket
layer initialized
Nov  8 23:05:54 knummi kernel: [   11.085460] Bluetooth: L2CAP socket
layer initialized
Nov  8 23:05:54 knummi kernel: [   11.085464] Bluetooth: SCO socket
layer initialized
Nov  8 23:05:54 knummi kernel: [   11.091855] MCE: In-kernel MCE
decoding enabled.
Nov  8 23:05:54 knummi kernel: [   11.095935] Bluetooth: Generic
Bluetooth USB driver ver 0.6
Nov  8 23:05:54 knummi kernel: [   11.095949] btusb 4-2.3:1.0:
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [   11.095951] btusb 4-2.3:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [   11.170439] piix4_smbus
0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Nov  8 23:05:54 knummi kernel: [   11.183447] EDAC MC: Ver: 2.1.0
Nov  8 23:05:54 knummi kernel: [   11.305541] Linux media interface: v0.10
Nov  8 23:05:54 knummi kernel: [   11.393060] AMD64 EDAC driver v3.4.0
Nov  8 23:05:54 knummi kernel: [   11.393178] EDAC amd64: DRAM ECC disabled.
Nov  8 23:05:54 knummi kernel: [   11.393184] EDAC amd64: ECC disabled
in the BIOS or no ECC capability, module will not load.
Nov  8 23:05:54 knummi kernel: [   11.393185]  Either enable ECC
checking or force module loading by setting 'ecc_enable_override'.
Nov  8 23:05:54 knummi kernel: [   11.393186]  (Note that use of the
override may cause unknown side effects.)
Nov  8 23:05:54 knummi kernel: [   11.406270] EXT4-fs (md1):
re-mounted. Opts: user_xattr,errors=remount-ro
Nov  8 23:05:54 knummi kernel: [   11.507951] Intel AES-NI
instructions are not detected.
Nov  8 23:05:54 knummi kernel: [   11.518111] btusb 4-2.3:1.2:
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [   11.518114] btusb 4-2.3:1.2:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [   11.518130] usbcore: registered new
interface driver btusb
Nov  8 23:05:54 knummi kernel: [   11.553026] Linux video capture
interface: v2.00
Nov  8 23:05:54 knummi kernel: [   11.556489] uvcvideo 4-2.4:1.0:
usb_probe_interface
Nov  8 23:05:54 knummi kernel: [   11.556492] uvcvideo 4-2.4:1.0:
usb_probe_interface - got id
Nov  8 23:05:54 knummi kernel: [   11.556508] uvcvideo: Found UVC 1.00
device <unnamed> (046d:0825)
Nov  8 23:05:54 knummi kernel: [   11.556899] usb 4-2.4: Successful
Endpoint Configure command
Nov  8 23:05:54 knummi kernel: [   11.565397] EXT4-fs (sda1): mounted
filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro
Nov  8 23:05:54 knummi kernel: [   11.705757] saa7146: register
extension 'budget_av'.
Nov  8 23:05:54 knummi kernel: [   11.705823] budget_av 0000:06:05.0:
PCI INT A -> GSI 20 (level, low) -> IRQ 20
Nov  8 23:05:54 knummi kernel: [   11.705869] saa7146: found saa7146 @
mem ffffc900117ae000 (revision 1, irq 20) (0x153b,0x1157).
Nov  8 23:05:54 knummi kernel: [   11.705873] saa7146 (0): dma buffer
size 192512
Nov  8 23:05:54 knummi kernel: [   11.705875] DVB: registering new
adapter (Terratec Cinergy 1200 DVB-T)
Nov  8 23:05:54 knummi kernel: [   11.723928] adapter failed MAC
signature check
Nov  8 23:05:54 knummi kernel: [   11.723930] encoded MAC from EEPROM
was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
Nov  8 23:05:54 knummi kernel: [   11.791031] snd_hda_intel
0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov  8 23:05:54 knummi kernel: [   11.820062] hda_codec: ALC892: BIOS
auto-probing.
Nov  8 23:05:54 knummi kernel: [   11.827179] input: HDA ATI SB
Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
Nov  8 23:05:54 knummi kernel: [   11.827364] snd_hda_intel
0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25
Nov  8 23:05:54 knummi kernel: [   11.827367] hda_intel: Disabling MSI
Nov  8 23:05:54 knummi kernel: [   11.827400] snd_hda_intel
0000:01:00.1: setting latency timer to 64
Nov  8 23:05:54 knummi kernel: [   11.955418] KNC1-0: MAC addr =
00:0a:ac:11:01:c6
Nov  8 23:05:54 knummi kernel: [   12.000993] r8169 0000:02:00.0:
eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
Nov  8 23:05:54 knummi kernel: [   12.011185] r8169 0000:02:00.0:
eth0: link down
Nov  8 23:05:54 knummi kernel: [   12.011190] r8169 0000:02:00.0:
eth0: link down
Nov  8 23:05:54 knummi kernel: [   12.011841] ADDRCONF(NETDEV_UP):
eth0: link is not ready
Nov  8 23:05:54 knummi kernel: [   12.078069] HDMI status: Codec=0
Pin=5 Presence_Detect=0 ELD_Valid=0
Nov  8 23:05:54 knummi kernel: [   12.117059] HDMI status: Codec=1
Pin=5 Presence_Detect=0 ELD_Valid=0
Nov  8 23:05:54 knummi kernel: [   12.156060] HDMI status: Codec=2
Pin=5 Presence_Detect=0 ELD_Valid=0
Nov  8 23:05:54 knummi kernel: [   12.172106] DVB: registering adapter
0 frontend 0 (Philips TDA10046H DVB-T)...
Nov  8 23:05:54 knummi kernel: [   12.172211] budget-av: ci interface
initialised.
Nov  8 23:05:54 knummi kernel: [   12.172258] budget_av 0000:06:06.0:
PCI INT A -> GSI 21 (level, low) -> IRQ 21
Nov  8 23:05:54 knummi kernel: [   12.172294] saa7146: found saa7146 @
mem ffffc9001195c000 (revision 1, irq 21) (0x153b,0x1157).
Nov  8 23:05:54 knummi kernel: [   12.172298] saa7146 (1): dma buffer
size 192512
Nov  8 23:05:54 knummi kernel: [   12.172300] DVB: registering new
adapter (Terratec Cinergy 1200 DVB-T)
Nov  8 23:05:54 knummi kernel: [   12.191064] adapter failed MAC
signature check
Nov  8 23:05:54 knummi kernel: [   12.191066] encoded MAC from EEPROM
was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
Nov  8 23:05:54 knummi kernel: [   12.196033] HDMI status: Codec=3
Pin=5 Presence_Detect=0 ELD_Valid=0
Nov  8 23:05:54 knummi kernel: [   12.199674] kjournald starting.
Commit interval 5 seconds
Nov  8 23:05:54 knummi kernel: [   12.214251] input: HDA NVidia
HDMI/DP as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
Nov  8 23:05:54 knummi kernel: [   12.214295] input: HDA NVidia
HDMI/DP as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
Nov  8 23:05:54 knummi kernel: [   12.214336] input: HDA NVidia
HDMI/DP as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
Nov  8 23:05:54 knummi kernel: [   12.214375] input: HDA NVidia
HDMI/DP as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
Nov  8 23:05:54 knummi kernel: [   12.289248] EXT3-fs (md0): using
internal journal
Nov  8 23:05:54 knummi kernel: [   12.289252] EXT3-fs (md0): mounted
filesystem with ordered data mode
Nov  8 23:05:54 knummi kernel: [   12.532260] KNC1-1: MAC addr =
00:0a:ac:11:02:44
Nov  8 23:05:54 knummi kernel: [   12.633258] DVB: registering adapter
1 frontend 0 (Philips TDA10046H DVB-T)...
Nov  8 23:05:54 knummi kernel: [   12.633463] budget-av: ci interface
initialised.
Nov  8 23:05:54 knummi kernel: [   13.154236] r8169 0000:05:00.0:
eth1: link down
Nov  8 23:05:54 knummi kernel: [   13.154880] ADDRCONF(NETDEV_UP):
eth1: link is not ready
Nov  8 23:05:55 knummi kernel: [   13.596502] sshd (1114):
/proc/1114/oom_adj is deprecated, please use /proc/1114/oom_score_adj
instead.
Nov  8 23:05:55 knummi kernel: [   14.101409] r8169 0000:02:00.0:
eth0: link up
Nov  8 23:05:55 knummi kernel: [   14.102101] ADDRCONF(NETDEV_CHANGE):
eth0: link becomes ready
Nov  8 23:05:56 knummi kernel: [   14.821373] r8169 0000:05:00.0:
eth1: link up
Nov  8 23:05:56 knummi kernel: [   14.822023] ADDRCONF(NETDEV_CHANGE):
eth1: link becomes ready
Nov  8 23:05:58 knummi kernel: [   16.940121] audit_printk_skb: 57
callbacks suppressed
Nov  8 23:05:58 knummi kernel: [   16.940123] type=1400
audit(1320786358.734:31): apparmor="STATUS" operation="profile_load"
name="/usr/lib/libvirt/virt-aa-helper" pid=1207 comm="apparmor_parser"
Nov  8 23:05:59 knummi kernel: [   17.245545] ip_tables: (C) 2000-2006
Netfilter Core Team
Nov  8 23:05:59 knummi kernel: [   17.816220] Netfilter messages via
NETLINK v0.30.
Nov  8 23:05:59 knummi kernel: [   17.828933] nf_conntrack version
0.5.0 (16384 buckets, 65536 max)
Nov  8 23:05:59 knummi kernel: [   17.974851] ip6_tables: (C)
2000-2006 Netfilter Core Team
Nov  8 23:05:59 knummi kernel: [   17.975149] NF_TPROXY: Transparent
proxy support initialized, version 4.1.0
Nov  8 23:05:59 knummi kernel: [   17.975151] NF_TPROXY: Copyright (c)
2006-2007 BalaBit IT Ltd.
Nov  8 23:05:59 knummi kernel: [   18.010707] ctnetlink v0.93:
registering with nfnetlink.
Nov  8 23:05:59 knummi kernel: [   18.076707] ipt_CLUSTERIP: ClusterIP
Version 0.8 loaded successfully
Nov  8 23:06:00 knummi kernel: [   18.410271] xt_time: kernel timezone
is +0200
Nov  8 23:06:00 knummi kernel: [   18.518999] Bridge firewalling registered
Nov  8 23:06:00 knummi kernel: [   18.779421] u32 classifier
Nov  8 23:06:00 knummi kernel: [   18.779423]     Actions configured
Nov  8 23:06:03 knummi kernel: [   21.568088] xhci_hcd 0000:04:00.0:
xHCI host not responding to stop endpoint command.
Nov  8 23:06:03 knummi kernel: [   21.568098] xhci_hcd 0000:04:00.0:
Assuming host is dying, halting host.
Nov  8 23:06:03 knummi kernel: [   21.568154] Bluetooth: hci0 urb
ffff880220c78b40 failed to resubmit (22)
Nov  8 23:06:03 knummi kernel: [   21.568283] Bluetooth: hci0 urb
ffff88021f1e29c0 failed to resubmit (22)
Nov  8 23:06:03 knummi kernel: [   21.568399] Bluetooth: hci0 urb
ffff88021f1e20c0 failed to resubmit (22)
Nov  8 23:06:03 knummi kernel: [   21.568520] xhci_hcd 0000:04:00.0:
HC died; cleaning up
Nov  8 23:06:03 knummi kernel: [   21.568647] hub 4-0:1.0: state 0
ports 2 chg 0000 evt 0000
Nov  8 23:06:03 knummi kernel: [   21.568656] usb 4-2.4: modprobe
timed out on ep0out len=0/0
Nov  8 23:06:03 knummi kernel: [   21.568669] uvcvideo: UVC non
compliance - GET_DEF(PROBE) not supported. Enabling workaround.
Nov  8 23:06:03 knummi kernel: [   21.568677] usb 4-1: USB disconnect,
device number 2
Nov  8 23:06:03 knummi kernel: [   21.568683] usb 4-1: unregistering device
Nov  8 23:06:03 knummi kernel: [   21.568690] usb 4-1: unregistering
interface 4-1:1.0
Nov  8 23:06:03 knummi kernel: [   21.568698] uvcvideo: Failed to
query (129) UVC probe control : -19 (exp. 26).
Nov  8 23:06:03 knummi kernel: [   21.568723] uvcvideo: Failed to
initialize the device (-5).
Nov  8 23:06:03 knummi kernel: [   21.568962] snd-usb-audio 4-2.4:1.2:
usb_probe_interface
Nov  8 23:06:03 knummi kernel: [   21.568976] snd-usb-audio 4-2.4:1.2:
usb_probe_interface - got id
Nov  8 23:06:03 knummi kernel: [   21.568983] usbcore: registered new
interface driver uvcvideo
Nov  8 23:06:03 knummi kernel: [   21.568989] USB Video Class driver (1.1.1)
Nov  8 23:06:03 knummi kernel: [   21.584409] usb 4-1:
usb_disable_device nuking all URBs
Nov  8 23:06:03 knummi kernel: [   21.584462] usb 4-2.4: Not enough
bandwidth for altsetting 1
Nov  8 23:06:03 knummi kernel: [   21.584475] 6:3:1: cannot set freq
16000 to ep 0x86
Nov  8 23:06:03 knummi kernel: [   21.584508] usb 4-2.4: Not enough
bandwidth for altsetting 2
Nov  8 23:06:03 knummi kernel: [   21.584515] 6:3:2: cannot set freq
24000 to ep 0x86
Nov  8 23:06:03 knummi kernel: [   21.584533] usb 4-2.4: Not enough
bandwidth for altsetting 3
Nov  8 23:06:03 knummi kernel: [   21.584540] 6:3:3: cannot set freq
32000 to ep 0x86
Nov  8 23:06:03 knummi kernel: [   21.584560] usb 4-2.4: Not enough
bandwidth for altsetting 4
Nov  8 23:06:03 knummi kernel: [   21.584566] 6:3:4: cannot set freq
48000 to ep 0x86
Nov  8 23:06:03 knummi kernel: [   21.584584] usb 4-2.4: Not enough
bandwidth for altsetting 0
Nov  8 23:06:03 knummi kernel: [   21.584973] usb 4-2: USB disconnect,
device number 3
Nov  8 23:06:03 knummi kernel: [   21.584980] usb 4-2.1: USB
disconnect, device number 4
Nov  8 23:06:03 knummi kernel: [   21.584987] usb 4-2.1:  
unregistering device
Nov  8 23:06:03 knummi kernel: [   21.584993] usb 4-2.1: unregistering
interface 4-2.1:1.0
Nov  8 23:06:03 knummi kernel: [   21.585345] usbcore: registered new
interface driver snd-usb-audio
Nov  8 23:06:03 knummi kernel: [   21.600419] usb 4-2.1: unregistering
interface 4-2.1:1.1
Nov  8 23:06:03 knummi kernel: [   21.610455] usb 4-2.1:
usb_disable_device nuking all URBs
Nov  8 23:06:03 knummi kernel: [   21.614251] usb 4-2.3: USB
disconnect, device number 5
Nov  8 23:06:03 knummi kernel: [   21.614259] usb 4-2.3:  
unregistering device
Nov  8 23:06:03 knummi kernel: [   21.614266] usb 4-2.3: unregistering
interface 4-2.3:1.0
Nov  8 23:06:03 knummi kernel: [   21.615037] usb 4-2.3: unregistering
interface 4-2.3:1.1
Nov  8 23:06:03 knummi kernel: [   21.615116] usb 4-2.3: unregistering
interface 4-2.3:1.2
Nov  8 23:06:03 knummi kernel: [   21.615164] usb 4-2.3:
usb_disable_device nuking all URBs
Nov  8 23:06:03 knummi kernel: [   21.616854] usb 4-2.4: USB
disconnect, device number 6
Nov  8 23:06:03 knummi kernel: [   21.616862] usb 4-2.4:  
unregistering device
Nov  8 23:06:03 knummi kernel: [   21.616869] usb 4-2.4: unregistering
interface 4-2.4:1.0
Nov  8 23:06:03 knummi kernel: [   21.616945] usb 4-2.4: unregistering
interface 4-2.4:1.1
Nov  8 23:06:03 knummi kernel: [   21.616990] usb 4-2.4: unregistering
interface 4-2.4:1.2
Nov  8 23:06:03 knummi kernel: [   21.617535] usb 4-2.4: unregistering
interface 4-2.4:1.3
Nov  8 23:06:03 knummi kernel: [   21.617595] usb 4-2.4:
usb_disable_device nuking all URBs
Nov  8 23:06:03 knummi kernel: [   21.617794] usb 4-2: unregistering device
Nov  8 23:06:03 knummi kernel: [   21.617802] usb 4-2: unregistering
interface 4-2:1.0
Nov  8 23:06:03 knummi kernel: [   21.617887] usb 4-2:
usb_disable_device nuking all URBs
Nov  8 23:06:03 knummi kernel: [   21.618069] hub 5-0:1.0: state 0
ports 2 chg 0000 evt 0000
Nov  8 23:06:03 knummi kernel: [   21.792610] type=1400
audit(1320786363.587:32): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf"
pid=2212 comm="apparmor_parser"
Nov  8 23:06:03 knummi kernel: [   21.792674] type=1400
audit(1320786363.587:33): apparmor="STATUS"
operation="profile_replace" name="/usr/sbin/cupsd" pid=2212
comm="apparmor_parser"
Nov  8 23:06:04 knummi kernel: [   22.678116] ADDRCONF(NETDEV_UP):
virbr0: link is not ready
Nov  8 23:06:05 knummi kernel: [   23.661842] Adding 7992252k swap on
/dev/mapper/cryptswap1.  Priority:-1 extents:1 across:7992252k
Nov  8 23:06:06 knummi kernel: [   24.146040] eth0: no IPv6 routers present
Nov  8 23:06:06 knummi kernel: [   25.082047] eth1: no IPv6 routers present
Nov  8 23:06:18 knummi kernel: [   36.258492] EXT4-fs (md1):
re-mounted. Opts: user_xattr,errors=remount-ro,commit=0
Nov  8 23:06:18 knummi kernel: [   36.263331] EXT4-fs (sda1):
re-mounted. Opts: user_xattr,errors=remount-ro,commit=0

Regards,
Tomi Orava

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html