On 11/10/2011 07:52 PM, Tomi Orava wrote: > > Quoting Andiry Xu <andiry.xu@xxxxxxx>: > >> On 11/09/2011 05:59 AM, Tomi Orava wrote: >>> >>> Quoting Andiry Xu <andiry.xu@xxxxxxx>: >>> >>>> On 11/08/2011 01:35 PM, Tomi Orava wrote: >>>>> >>>>> Hi, >>>>> >>>>>> The USB 2.0 hub doesn't want to enumerate under EHCI. -32 is -EPIPE, >>>>>> which is a protocol error, maybe a stall? In any case, it looks like >>>>>> your hub is just not working. Have you tried a different hub? Or a >>>>>> different cable to the hub? >>>>> >>>>> I just wanted to verify that all the end devices are ok and working, >>>>> so I plugged the Cypress usb 2.0 hub & logitech web camera to >>>>> my lenovo laptop (standard log below) and everything is working >>>>> just fine. >>>>> I'm currently using another logitech mouse via this hub. >>>>> Would it help to get more detailed usb debug log out of these devices >>>>> while connected to a host where they do work ? >>>>> >>>> >>>> Please try the patch attached, connect the hub to the USB2.0 ports on >>>> your original board to see if it helps. >>> >>> Here is the full kernel log with your & Sarah's patches applied. >> >> You plugged to the xHCI ports. Please plug it to USB2(EHCI) ports. > > Ups! Here is the proper log: http://ncircle.nullnet.fi/usb/usb.log > Its 800K, mostly due to xhci_hcd debug logs. > So the host just fail to fetch device descriptor of the hub devices. I'll try to find some hub using Cypress Tetra and check the issue locally. Thanks, Andiry > After the reboot, the only visible usb device is the mouse: > > Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 001 Device 002: ID 046d:c01b Logitech, Inc. MX310 Optical Mouse > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Regards, > Tomi Orava > >>> >>> Nov 8 23:05:54 knummi kernel: imklog 4.2.0, log source = /proc/kmsg >>> started. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Initializing cgroup >>> subsys cpuset >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Initializing cgroup >>> subsys cpu >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Linux version 3.1.0-tmo5 >>> (root@tipoca) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 >>> SMP Tue Nov 8 22:39:46 EET 2011 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Command line: >>> BOOT_IMAGE=/vmlinuz-3.1.0-tmo5 >>> root=UUID=69fbf031-8b40-4167-860c-2024ab4f8ae9 ro >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-provided physical >>> RAM map: >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 0000000000000000 - 000000000009d800 (usable) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 000000000009d800 - 00000000000a0000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000000e0000 - 0000000000100000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 0000000000100000 - 00000000cd952000 (usable) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cd952000 - 00000000cd99f000 (ACPI NVS) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cd99f000 - 00000000cd9a8000 (ACPI data) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cd9a8000 - 00000000cdae0000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdae0000 - 00000000cdaf1000 (ACPI NVS) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdaf1000 - 00000000cdb04000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdb04000 - 00000000cdb06000 (ACPI NVS) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdb06000 - 00000000cdb0f000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdb0f000 - 00000000cdb15000 (ACPI NVS) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdb15000 - 00000000cdb77000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdb77000 - 00000000cdd7a000 (ACPI NVS) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000cdd7a000 - 00000000cdf00000 (usable) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000f8000000 - 00000000fc000000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fec00000 - 00000000fec01000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fec10000 - 00000000fec11000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fec20000 - 00000000fec21000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fed00000 - 00000000fed01000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fed61000 - 00000000fed71000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fed80000 - 00000000fed90000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 00000000fef00000 - 0000000100000000 (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: >>> 0000000100001000 - 0000000230000000 (usable) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] NX (Execute Disable) >>> protection: active >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMI 2.7 present. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMI: To be filled by >>> O.E.M. To be filled by O.E.M./M5A97 PRO, BIOS 0810 09/29/2011 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] e820 update range: >>> 0000000000000000 - 0000000000010000 (usable) ==> (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] e820 remove range: >>> 00000000000a0000 - 0000000000100000 (usable) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] No AGP bridge found >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] last_pfn = 0x230000 >>> max_arch_pfn = 0x400000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] MTRR default type: >>> uncachable >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] MTRR fixed ranges enabled: >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 00000-9FFFF write-back >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] A0000-BFFFF >>> write-through >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] C0000-CDFFF >>> write-protect >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] CE000-EBFFF uncachable >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] EC000-FFFFF >>> write-protect >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] MTRR variable ranges >>> enabled: >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0 base 000000000000 >>> mask FFFF80000000 write-back >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 1 base 000080000000 >>> mask FFFFC0000000 write-back >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 2 base 0000C0000000 >>> mask FFFFF0000000 write-back >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 3 base 0000CDF00000 >>> mask FFFFFFF00000 uncachable >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 4 base 0000CE000000 >>> mask FFFFFE000000 uncachable >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 5 disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 6 disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 7 disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] TOM2: 0000000230000000 >>> aka 8960M >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] x86 PAT enabled: cpu 0, >>> old 0x7040600070406, new 0x7010600070106 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] e820 update range: >>> 00000000cdf00000 - 0000000100000000 (usable) ==> (reserved) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] last_pfn = 0xcdf00 >>> max_arch_pfn = 0x400000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] initial memory mapped : >>> 0 - 20000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Base memory trampoline >>> at [ffff880000098000] 98000 size 20480 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Using GB pages for >>> direct mapping >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] init_memory_mapping: >>> 0000000000000000-00000000cdf00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0000000000 - >>> 00c0000000 page 1G >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 00c0000000 - >>> 00cde00000 page 2M >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 00cde00000 - >>> 00cdf00000 page 4k >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] kernel direct mapping >>> tables up to cdf00000 @ 1fffd000-20000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] init_memory_mapping: >>> 0000000100000000-0000000230000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0100000000 - >>> 0200000000 page 1G >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0200000000 - >>> 0230000000 page 2M >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] kernel direct mapping >>> tables up to 230000000 @ cdefe000-cdf00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] RAMDISK: 3752f000 - >>> 37ff0000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: RSDP >>> 00000000000f0450 00024 (v02 ALASKA) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: XSDT >>> 00000000cd99f068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: FACP >>> 00000000cd9a6df0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI Warning: Optional >>> field Pm2ControlBlock has zero address or length: >>> 0x0000000000000000/0x1 (20110623/tbfadt-560) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: DSDT >>> 00000000cd99f140 07CA9 (v02 ALASKA A M I 00000000 INTL 20051117) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: FACS >>> 00000000cdb0ff80 00040 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: APIC >>> 00000000cd9a6ee8 0009E (v03 ALASKA A M I 01072009 AMI 00010013) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: MCFG >>> 00000000cd9a6f88 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: HPET >>> 00000000cd9a6fc8 00038 (v01 ALASKA A M I 01072009 AMI 00000004) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: SSDT >>> 00000000cd9a7000 008BC (v01 AMD POWERNOW 00000001 AMD 00000001) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: Local APIC address >>> 0xfee00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Scanning NUMA topology >>> in Northbridge 24 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] No NUMA configuration >>> found >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Faking a node at >>> 0000000000000000-0000000230000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Initmem setup node 0 >>> 0000000000000000-0000000230000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] NODE_DATA >>> [000000022fffb000 - 000000022fffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] >>> [ffffea0000000000-ffffea0008bfffff] PMD -> >>> [ffff880227600000-ffff88022f5fffff] on node 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Zone PFN ranges: >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA 0x00000010 -> >>> 0x00001000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA32 0x00001000 -> >>> 0x00100000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Normal 0x00100000 -> >>> 0x00230000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Movable zone start PFN >>> for each node >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] early_node_map[4] active >>> PFN ranges >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0: 0x00000010 -> >>> 0x0000009d >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0: 0x00000100 -> >>> 0x000cd952 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0: 0x000cdd7a -> >>> 0x000cdf00 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] 0: 0x00100001 -> >>> 0x00230000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] On node 0 totalpages: >>> 2087524 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA zone: 64 pages >>> used for memmap >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA zone: 5 pages >>> reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA zone: 3912 pages, >>> LIFO batch:0 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA32 zone: 16320 >>> pages used for memmap >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA32 zone: 822040 >>> pages, LIFO batch:31 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Normal zone: 19456 >>> pages used for memmap >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Normal zone: 1225727 >>> pages, LIFO batch:31 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: PM-Timer IO Port: >>> 0x808 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: Local APIC address >>> 0xfee00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x01] lapic_id[0x00] enabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x02] lapic_id[0x01] enabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x03] lapic_id[0x02] enabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x04] lapic_id[0x03] enabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x05] lapic_id[0x05] disabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x06] lapic_id[0x06] disabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x07] lapic_id[0x07] disabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC >>> (acpi_id[0x08] lapic_id[0x08] disabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC_NMI >>> (acpi_id[0xff] high edge lint[0x1]) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IOAPIC (id[0x05] >>> address[0xfec00000] gsi_base[0]) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] IOAPIC[0]: apic_id 5, >>> version 33, address 0xfec00000, GSI 0-23 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IOAPIC (id[0x06] >>> address[0xfec20000] gsi_base[24]) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] IOAPIC[1]: apic_id 6, >>> version 33, address 0xfec20000, GSI 24-55 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 >>> bus_irq 0 global_irq 2 dfl dfl) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 >>> bus_irq 9 global_irq 9 low level) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IRQ0 used by >>> override. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IRQ2 used by >>> override. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IRQ9 used by >>> override. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Using ACPI (MADT) for >>> SMP configuration information >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: HPET id: >>> 0xffffffff base: 0xfed00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] SMP: Allowing 8 CPUs, 4 >>> hotplug CPUs >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] nr_irqs_gsi: 72 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 000000000009d000 - 000000000009e000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 000000000009e000 - 00000000000a0000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000000a0000 - 00000000000e0000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000000e0000 - 0000000000100000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cd952000 - 00000000cd99f000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cd99f000 - 00000000cd9a8000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cd9a8000 - 00000000cdae0000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdae0000 - 00000000cdaf1000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdaf1000 - 00000000cdb04000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdb04000 - 00000000cdb06000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdb06000 - 00000000cdb0f000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdb0f000 - 00000000cdb15000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdb15000 - 00000000cdb77000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdb77000 - 00000000cdd7a000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000cdf00000 - 00000000f8000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000f8000000 - 00000000fc000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fc000000 - 00000000fec00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fec00000 - 00000000fec01000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fec01000 - 00000000fec10000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fec10000 - 00000000fec11000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fec11000 - 00000000fec20000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fec20000 - 00000000fec21000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fec21000 - 00000000fed00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fed00000 - 00000000fed01000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fed01000 - 00000000fed61000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fed61000 - 00000000fed71000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fed71000 - 00000000fed80000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fed80000 - 00000000fed90000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fed90000 - 00000000fef00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 00000000fef00000 - 0000000100000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave >>> memory: 0000000100000000 - 0000000100001000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Allocating PCI resources >>> starting at cdf00000 (gap: cdf00000:2a100000) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Booting paravirtualized >>> kernel on bare hardware >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] setup_percpu: >>> NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PERCPU: Embedded 27 >>> pages/cpu @ffff88022fc00000 s81152 r8192 d21248 u262144 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] pcpu-alloc: s81152 r8192 >>> d21248 u262144 alloc=1*2097152 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 >>> 4 5 6 7 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Built 1 zonelists in >>> Zone order, mobility grouping on. Total pages: 2051679 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Policy zone: Normal >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Kernel command line: >>> BOOT_IMAGE=/vmlinuz-3.1.0-tmo5 >>> root=UUID=69fbf031-8b40-4167-860c-2024ab4f8ae9 ro >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] PID hash table entries: >>> 4096 (order: 3, 32768 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Checking aperture... >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] No AGP bridge found >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Node 0: aperture @ >>> f8000000 size 64 MB >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Memory: >>> 8127572k/9175040k available (5772k kernel code, 824944k absent, >>> 222524k reserved, 5213k data, 952k init) >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] SLUB: Genslabs=15, >>> HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Hierarchical RCU >>> implementation. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] RCU dyntick-idle >>> grace-period acceleration is enabled. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] NR_IRQS:16640 >>> nr_irqs:1288 16 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Extended CMOS year: 2000 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] spurious 8259A >>> interrupt: IRQ7. >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Console: colour VGA+ 80x25 >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] console [tty0] enabled >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] allocated 67108864 bytes >>> of page_cgroup >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] please try >>> 'cgroup_disable=memory' option if you don't want memory cgroups >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] hpet clockevent registered >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Fast TSC calibration >>> using PIT >>> Nov 8 23:05:54 knummi kernel: [ 0.000000] Detected 3411.228 MHz >>> processor. >>> Nov 8 23:05:54 knummi kernel: [ 0.001003] Calibrating delay loop >>> (skipped), value calculated using timer frequency.. 6822.45 BogoMIPS >>> (lpj=3411228) >>> Nov 8 23:05:54 knummi kernel: [ 0.001124] pid_max: default: 32768 >>> minimum: 301 >>> Nov 8 23:05:54 knummi kernel: [ 0.001203] Security Framework >>> initialized >>> Nov 8 23:05:54 knummi kernel: [ 0.001269] AppArmor: AppArmor >>> initialized >>> Nov 8 23:05:54 knummi kernel: [ 0.002374] Dentry cache hash table >>> entries: 1048576 (order: 11, 8388608 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.004459] Inode-cache hash table >>> entries: 524288 (order: 10, 4194304 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.005408] Mount-cache hash table >>> entries: 256 >>> Nov 8 23:05:54 knummi kernel: [ 0.005567] Initializing cgroup >>> subsys cpuacct >>> Nov 8 23:05:54 knummi kernel: [ 0.005628] Initializing cgroup >>> subsys memory >>> Nov 8 23:05:54 knummi kernel: [ 0.005692] Initializing cgroup >>> subsys devices >>> Nov 8 23:05:54 knummi kernel: [ 0.005751] Initializing cgroup >>> subsys freezer >>> Nov 8 23:05:54 knummi kernel: [ 0.005810] Initializing cgroup >>> subsys net_cls >>> Nov 8 23:05:54 knummi kernel: [ 0.005887] tseg: 00cdf00000 >>> Nov 8 23:05:54 knummi kernel: [ 0.005889] CPU: Physical Processor >>> ID: 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.005947] CPU: Processor Core ID: 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.006002] mce: CPU supports 6 MCE >>> banks >>> Nov 8 23:05:54 knummi kernel: [ 0.006065] using AMD E400 aware >>> idle routine >>> Nov 8 23:05:54 knummi kernel: [ 0.007355] ACPI: Core revision >>> 20110623 >>> Nov 8 23:05:54 knummi kernel: [ 0.010011] ftrace: allocating 21951 >>> entries in 87 pages >>> Nov 8 23:05:54 knummi kernel: [ 0.011334] ..TIMER: vector=0x30 >>> apic1=0 pin1=2 apic2=-1 pin2=-1 >>> Nov 8 23:05:54 knummi kernel: [ 0.021960] CPU0: AMD Phenom(tm) II >>> X4 965 Processor stepping 03 >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] Performance Events: AMD >>> PMU driver. >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... >>> version: 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... bit >>> width: 48 >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... generic >>> registers: 4 >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... value mask: >>> 0000ffffffffffff >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... max period: >>> 00007fffffffffff >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... fixed-purpose >>> events: 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] ... event mask: >>> 000000000000000f >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] Booting Node 0, >>> Processors #1 >>> Nov 8 23:05:54 knummi kernel: [ 0.022998] smpboot cpu 1: start_ip >>> = 98000 >>> Nov 8 23:05:54 knummi kernel: [ 0.094002] System has AMD C1E enabled >>> Nov 8 23:05:54 knummi kernel: [ 0.094037] #2 >>> Nov 8 23:05:54 knummi kernel: [ 0.094038] smpboot cpu 2: start_ip >>> = 98000 >>> Nov 8 23:05:54 knummi kernel: [ 0.094123] Switch to broadcast >>> mode on CPU1 >>> Nov 8 23:05:54 knummi kernel: [ 0.165995] Switch to broadcast >>> mode on CPU2 >>> Nov 8 23:05:54 knummi kernel: [ 0.166033] #3 >>> Nov 8 23:05:54 knummi kernel: [ 0.166034] smpboot cpu 3: start_ip >>> = 98000 >>> Nov 8 23:05:54 knummi kernel: [ 0.237986] Brought up 4 CPUs >>> Nov 8 23:05:54 knummi kernel: [ 0.237985] Switch to broadcast >>> mode on CPU3 >>> Nov 8 23:05:54 knummi kernel: [ 0.238102] Total of 4 processors >>> activated (27290.84 BogoMIPS). >>> Nov 8 23:05:54 knummi kernel: [ 0.239064] Switch to broadcast >>> mode on CPU0 >>> Nov 8 23:05:54 knummi kernel: [ 0.239064] devtmpfs: initialized >>> Nov 8 23:05:54 knummi kernel: [ 0.239108] PM: Registering ACPI NVS >>> region at cd952000 (315392 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.239108] PM: Registering ACPI NVS >>> region at cdae0000 (69632 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.239108] PM: Registering ACPI NVS >>> region at cdb04000 (8192 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.239168] PM: Registering ACPI NVS >>> region at cdb0f000 (24576 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.239234] PM: Registering ACPI NVS >>> region at cdb77000 (2109440 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.240557] print_constraints: dummy: >>> Nov 8 23:05:54 knummi kernel: [ 0.240632] RTC time: 21:05:41, >>> date: 11/08/11 >>> Nov 8 23:05:54 knummi kernel: [ 0.240716] NET: Registered protocol >>> family 16 >>> Nov 8 23:05:54 knummi kernel: [ 0.241026] node 0 link 0: io port >>> [b000, ffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241028] TOM: 00000000d0000000 >>> aka 3328M >>> Nov 8 23:05:54 knummi kernel: [ 0.241086] Fam 10h mmconf >>> [e0000000, efffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241088] node 0 link 0: mmio >>> [d0000000, fef0ffff] ==> [d0000000, dfffffff] and [f0000000, fef0ffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241092] TOM2: 0000000230000000 >>> aka 8960M >>> Nov 8 23:05:54 knummi kernel: [ 0.241150] bus: [00, 1f] on node 0 >>> link 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.241152] bus: 00 index 0 [io >>> 0x0000-0xffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241153] bus: 00 index 1 [mem >>> 0xd0000000-0xdfffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241155] bus: 00 index 2 [mem >>> 0xf0000000-0xffffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241156] bus: 00 index 3 [mem >>> 0x230000000-0xfcffffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.241163] Extended Config Space >>> enabled on 1 nodes >>> Nov 8 23:05:54 knummi kernel: [ 0.241236] ACPI: bus type pci >>> registered >>> Nov 8 23:05:54 knummi kernel: [ 0.241328] PCI: MMCONFIG for domain >>> 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) >>> Nov 8 23:05:54 knummi kernel: [ 0.241409] PCI: not using MMCONFIG >>> Nov 8 23:05:54 knummi kernel: [ 0.241466] PCI: Using configuration >>> type 1 for base access >>> Nov 8 23:05:54 knummi kernel: [ 0.241526] PCI: Using configuration >>> type 1 for extended access >>> Nov 8 23:05:54 knummi kernel: [ 0.242054] bio: create slab >>> <bio-0> at 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.242056] ACPI: Added _OSI(Module >>> Device) >>> Nov 8 23:05:54 knummi kernel: [ 0.242056] ACPI: Added >>> _OSI(Processor Device) >>> Nov 8 23:05:54 knummi kernel: [ 0.242111] ACPI: Added _OSI(3.0 >>> _SCP Extensions) >>> Nov 8 23:05:54 knummi kernel: [ 0.242169] ACPI: Added >>> _OSI(Processor Aggregator Device) >>> Nov 8 23:05:54 knummi kernel: [ 0.243105] ACPI: EC: Look up EC in >>> DSDT >>> Nov 8 23:05:54 knummi kernel: [ 0.243739] ACPI: Executed 2 blocks >>> of module-level executable AML code >>> Nov 8 23:05:54 knummi kernel: [ 0.249074] ACPI Error: [RAMB] >>> Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) >>> Nov 8 23:05:54 knummi kernel: [ 0.249267] ACPI Exception: >>> AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) >>> (20110623/nsinit-349) >>> Nov 8 23:05:54 knummi kernel: [ 0.249688] ACPI: Interpreter enabled >>> Nov 8 23:05:54 knummi kernel: [ 0.249747] ACPI: (supports S0 S1 >>> S3 S4 S5) >>> Nov 8 23:05:54 knummi kernel: [ 0.250025] ACPI: Using IOAPIC for >>> interrupt routing >>> Nov 8 23:05:54 knummi kernel: [ 0.250173] PCI: MMCONFIG for domain >>> 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) >>> Nov 8 23:05:54 knummi kernel: [ 0.250276] PCI: MMCONFIG at [mem >>> 0xe0000000-0xefffffff] reserved in ACPI motherboard resources >>> Nov 8 23:05:54 knummi kernel: [ 0.277589] ACPI: EC: GPE = 0xa, >>> I/O: command/status = 0x66, data = 0x62 >>> Nov 8 23:05:54 knummi kernel: [ 0.277747] ACPI: No dock devices >>> found. >>> Nov 8 23:05:54 knummi kernel: [ 0.277805] HEST: Table not found. >>> Nov 8 23:05:54 knummi kernel: [ 0.277863] PCI: Using host bridge >>> windows from ACPI; if necessary, use "pci=nocrs" and report a bug >>> Nov 8 23:05:54 knummi kernel: [ 0.278053] ACPI: PCI Root Bridge >>> [PCI0] (domain 0000 [bus 00-ff]) >>> Nov 8 23:05:54 knummi kernel: [ 0.278255] pci_root PNP0A03:00: >>> host bridge window [io 0x0000-0x03af] >>> Nov 8 23:05:54 knummi kernel: [ 0.278318] pci_root PNP0A03:00: >>> host bridge window [io 0x03e0-0x0cf7] >>> Nov 8 23:05:54 knummi kernel: [ 0.278381] pci_root PNP0A03:00: >>> host bridge window [io 0x03b0-0x03df] >>> Nov 8 23:05:54 knummi kernel: [ 0.278443] pci_root PNP0A03:00: >>> host bridge window [io 0x0d00-0xffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.278506] pci_root PNP0A03:00: >>> host bridge window [mem 0x000a0000-0x000bffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.278583] pci_root PNP0A03:00: >>> host bridge window [mem 0x000c0000-0x000dffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.278661] pci_root PNP0A03:00: >>> host bridge window [mem 0xd0000000-0xffffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.278749] pci 0000:00:00.0: >>> [1002:5a14] type 0 class 0x000600 >>> Nov 8 23:05:54 knummi kernel: [ 0.278792] pci 0000:00:02.0: >>> [1002:5a16] type 1 class 0x000604 >>> Nov 8 23:05:54 knummi kernel: [ 0.278813] pci 0000:00:02.0: PME# >>> supported from D0 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.278815] pci 0000:00:02.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.278827] pci 0000:00:04.0: >>> [1002:5a18] type 1 class 0x000604 >>> Nov 8 23:05:54 knummi kernel: [ 0.278847] pci 0000:00:04.0: PME# >>> supported from D0 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.278849] pci 0000:00:04.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.278860] pci 0000:00:06.0: >>> [1002:5a1a] type 1 class 0x000604 >>> Nov 8 23:05:54 knummi kernel: [ 0.278880] pci 0000:00:06.0: PME# >>> supported from D0 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.278882] pci 0000:00:06.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.278892] pci 0000:00:07.0: >>> [1002:5a1b] type 1 class 0x000604 >>> Nov 8 23:05:54 knummi kernel: [ 0.278911] pci 0000:00:07.0: PME# >>> supported from D0 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.278914] pci 0000:00:07.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.278925] pci 0000:00:0a.0: >>> [1002:5a1d] type 1 class 0x000604 >>> Nov 8 23:05:54 knummi kernel: [ 0.278945] pci 0000:00:0a.0: PME# >>> supported from D0 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.278947] pci 0000:00:0a.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.278979] pci 0000:00:11.0: >>> [1002:4391] type 0 class 0x000106 >>> Nov 8 23:05:54 knummi kernel: [ 0.278993] pci 0000:00:11.0: reg >>> 10: [io 0xf040-0xf047] >>> Nov 8 23:05:54 knummi kernel: [ 0.279000] pci 0000:00:11.0: reg >>> 14: [io 0xf030-0xf033] >>> Nov 8 23:05:54 knummi kernel: [ 0.279006] pci 0000:00:11.0: reg >>> 18: [io 0xf020-0xf027] >>> Nov 8 23:05:54 knummi kernel: [ 0.279013] pci 0000:00:11.0: reg >>> 1c: [io 0xf010-0xf013] >>> Nov 8 23:05:54 knummi kernel: [ 0.279020] pci 0000:00:11.0: reg >>> 20: [io 0xf000-0xf00f] >>> Nov 8 23:05:54 knummi kernel: [ 0.279027] pci 0000:00:11.0: reg >>> 24: [mem 0xfe50b000-0xfe50b3ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279060] pci 0000:00:12.0: >>> [1002:4397] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279070] pci 0000:00:12.0: reg >>> 10: [mem 0xfe50a000-0xfe50afff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279120] pci 0000:00:12.2: >>> [1002:4396] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279134] pci 0000:00:12.2: reg >>> 10: [mem 0xfe509000-0xfe5090ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279182] pci 0000:00:12.2: >>> supports D1 D2 >>> Nov 8 23:05:54 knummi kernel: [ 0.279184] pci 0000:00:12.2: PME# >>> supported from D0 D1 D2 D3hot >>> Nov 8 23:05:54 knummi kernel: [ 0.279187] pci 0000:00:12.2: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.279202] pci 0000:00:13.0: >>> [1002:4397] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279211] pci 0000:00:13.0: reg >>> 10: [mem 0xfe508000-0xfe508fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279260] pci 0000:00:13.2: >>> [1002:4396] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279274] pci 0000:00:13.2: reg >>> 10: [mem 0xfe507000-0xfe5070ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279322] pci 0000:00:13.2: >>> supports D1 D2 >>> Nov 8 23:05:54 knummi kernel: [ 0.279324] pci 0000:00:13.2: PME# >>> supported from D0 D1 D2 D3hot >>> Nov 8 23:05:54 knummi kernel: [ 0.279327] pci 0000:00:13.2: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.279341] pci 0000:00:14.0: >>> [1002:4385] type 0 class 0x000c05 >>> Nov 8 23:05:54 knummi kernel: [ 0.279394] pci 0000:00:14.2: >>> [1002:4383] type 0 class 0x000403 >>> Nov 8 23:05:54 knummi kernel: [ 0.279410] pci 0000:00:14.2: reg >>> 10: [mem 0xfe500000-0xfe503fff 64bit] >>> Nov 8 23:05:54 knummi kernel: [ 0.279450] pci 0000:00:14.2: PME# >>> supported from D0 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.279453] pci 0000:00:14.2: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.279462] pci 0000:00:14.3: >>> [1002:439d] type 0 class 0x000601 >>> Nov 8 23:05:54 knummi kernel: [ 0.279515] pci 0000:00:14.4: >>> [1002:4384] type 1 class 0x000604 >>> Nov 8 23:05:54 knummi kernel: [ 0.279543] pci 0000:00:14.5: >>> [1002:4399] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279552] pci 0000:00:14.5: reg >>> 10: [mem 0xfe506000-0xfe506fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279600] pci 0000:00:16.0: >>> [1002:4397] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279609] pci 0000:00:16.0: reg >>> 10: [mem 0xfe505000-0xfe505fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279658] pci 0000:00:16.2: >>> [1002:4396] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.279672] pci 0000:00:16.2: reg >>> 10: [mem 0xfe504000-0xfe5040ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279720] pci 0000:00:16.2: >>> supports D1 D2 >>> Nov 8 23:05:54 knummi kernel: [ 0.279722] pci 0000:00:16.2: PME# >>> supported from D0 D1 D2 D3hot >>> Nov 8 23:05:54 knummi kernel: [ 0.279725] pci 0000:00:16.2: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.279738] pci 0000:00:18.0: >>> [1022:1200] type 0 class 0x000600 >>> Nov 8 23:05:54 knummi kernel: [ 0.279750] pci 0000:00:18.1: >>> [1022:1201] type 0 class 0x000600 >>> Nov 8 23:05:54 knummi kernel: [ 0.279759] pci 0000:00:18.2: >>> [1022:1202] type 0 class 0x000600 >>> Nov 8 23:05:54 knummi kernel: [ 0.279769] pci 0000:00:18.3: >>> [1022:1203] type 0 class 0x000600 >>> Nov 8 23:05:54 knummi kernel: [ 0.279781] pci 0000:00:18.4: >>> [1022:1204] type 0 class 0x000600 >>> Nov 8 23:05:54 knummi kernel: [ 0.279821] pci 0000:01:00.0: >>> [10de:0de1] type 0 class 0x000300 >>> Nov 8 23:05:54 knummi kernel: [ 0.279829] pci 0000:01:00.0: reg >>> 10: [mem 0xfd000000-0xfdffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.279838] pci 0000:01:00.0: reg >>> 14: [mem 0xd0000000-0xd7ffffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.279847] pci 0000:01:00.0: reg >>> 1c: [mem 0xd8000000-0xd9ffffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.279853] pci 0000:01:00.0: reg >>> 24: [io 0xe000-0xe07f] >>> Nov 8 23:05:54 knummi kernel: [ 0.279859] pci 0000:01:00.0: reg >>> 30: [mem 0xfe000000-0xfe07ffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.279896] pci 0000:01:00.1: >>> [10de:0bea] type 0 class 0x000403 >>> Nov 8 23:05:54 knummi kernel: [ 0.279904] pci 0000:01:00.1: reg >>> 10: [mem 0xfe080000-0xfe083fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.281983] pci 0000:00:02.0: PCI >>> bridge to [bus 01-01] >>> Nov 8 23:05:54 knummi kernel: [ 0.282046] pci 0000:00:02.0: >>> bridge window [io 0xe000-0xefff] >>> Nov 8 23:05:54 knummi kernel: [ 0.282049] pci 0000:00:02.0: >>> bridge window [mem 0xfd000000-0xfe0fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.282052] pci 0000:00:02.0: >>> bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.282085] pci 0000:02:00.0: >>> [10ec:8168] type 0 class 0x000200 >>> Nov 8 23:05:54 knummi kernel: [ 0.282097] pci 0000:02:00.0: reg >>> 10: [io 0xd000-0xd0ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.282115] pci 0000:02:00.0: reg >>> 18: [mem 0xda104000-0xda104fff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.282127] pci 0000:02:00.0: reg >>> 20: [mem 0xda100000-0xda103fff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.282160] pci 0000:02:00.0: >>> supports D1 D2 >>> Nov 8 23:05:54 knummi kernel: [ 0.282162] pci 0000:02:00.0: PME# >>> supported from D0 D1 D2 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.282165] pci 0000:02:00.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.283982] pci 0000:00:04.0: PCI >>> bridge to [bus 02-02] >>> Nov 8 23:05:54 knummi kernel: [ 0.284045] pci 0000:00:04.0: >>> bridge window [io 0xd000-0xdfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.284048] pci 0000:00:04.0: >>> bridge window [mem 0xda100000-0xda1fffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.284085] pci 0000:03:00.0: >>> [197b:2362] type 0 class 0x000101 >>> Nov 8 23:05:54 knummi kernel: [ 0.284107] pci 0000:03:00.0: reg >>> 10: [io 0xc040-0xc047] >>> Nov 8 23:05:54 knummi kernel: [ 0.284116] pci 0000:03:00.0: reg >>> 14: [io 0xc030-0xc033] >>> Nov 8 23:05:54 knummi kernel: [ 0.284126] pci 0000:03:00.0: reg >>> 18: [io 0xc020-0xc027] >>> Nov 8 23:05:54 knummi kernel: [ 0.284135] pci 0000:03:00.0: reg >>> 1c: [io 0xc010-0xc013] >>> Nov 8 23:05:54 knummi kernel: [ 0.284145] pci 0000:03:00.0: reg >>> 20: [io 0xc000-0xc00f] >>> Nov 8 23:05:54 knummi kernel: [ 0.284155] pci 0000:03:00.0: reg >>> 24: [mem 0xfe410000-0xfe4101ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.284164] pci 0000:03:00.0: reg >>> 30: [mem 0x00000000-0x0000ffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.284189] pci 0000:03:00.0: PME# >>> supported from D3hot >>> Nov 8 23:05:54 knummi kernel: [ 0.284192] pci 0000:03:00.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.285982] pci 0000:00:06.0: PCI >>> bridge to [bus 03-03] >>> Nov 8 23:05:54 knummi kernel: [ 0.286044] pci 0000:00:06.0: >>> bridge window [io 0xc000-0xcfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.286047] pci 0000:00:06.0: >>> bridge window [mem 0xfe400000-0xfe4fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.286084] pci 0000:04:00.0: >>> [1b21:1042] type 0 class 0x000c03 >>> Nov 8 23:05:54 knummi kernel: [ 0.286100] pci 0000:04:00.0: reg >>> 10: [mem 0xfe300000-0xfe307fff 64bit] >>> Nov 8 23:05:54 knummi kernel: [ 0.286170] pci 0000:04:00.0: PME# >>> supported from D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.286173] pci 0000:04:00.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.287981] pci 0000:00:07.0: PCI >>> bridge to [bus 04-04] >>> Nov 8 23:05:54 knummi kernel: [ 0.288044] pci 0000:00:07.0: >>> bridge window [mem 0xfe300000-0xfe3fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288082] pci 0000:05:00.0: >>> [10ec:8168] type 0 class 0x000200 >>> Nov 8 23:05:54 knummi kernel: [ 0.288095] pci 0000:05:00.0: reg >>> 10: [io 0xb000-0xb0ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288117] pci 0000:05:00.0: reg >>> 18: [mem 0xfe200000-0xfe200fff 64bit] >>> Nov 8 23:05:54 knummi kernel: [ 0.288142] pci 0000:05:00.0: reg >>> 30: [mem 0xfffe0000-0xffffffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.288175] pci 0000:05:00.0: >>> supports D1 D2 >>> Nov 8 23:05:54 knummi kernel: [ 0.288177] pci 0000:05:00.0: PME# >>> supported from D1 D2 D3hot D3cold >>> Nov 8 23:05:54 knummi kernel: [ 0.288180] pci 0000:05:00.0: PME# >>> disabled >>> Nov 8 23:05:54 knummi kernel: [ 0.288197] pci 0000:05:00.0: >>> disabling ASPM on pre-1.1 PCIe device. You can enable it with >>> 'pcie_aspm=force' >>> Nov 8 23:05:54 knummi kernel: [ 0.288283] pci 0000:00:0a.0: PCI >>> bridge to [bus 05-05] >>> Nov 8 23:05:54 knummi kernel: [ 0.288345] pci 0000:00:0a.0: >>> bridge window [io 0xb000-0xbfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288347] pci 0000:00:0a.0: >>> bridge window [mem 0xfe200000-0xfe2fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288368] pci 0000:06:05.0: >>> [1131:7146] type 0 class 0x000480 >>> Nov 8 23:05:54 knummi kernel: [ 0.288381] pci 0000:06:05.0: reg >>> 10: [mem 0xfe101000-0xfe1011ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288442] pci 0000:06:06.0: >>> [1131:7146] type 0 class 0x000480 >>> Nov 8 23:05:54 knummi kernel: [ 0.288455] pci 0000:06:06.0: reg >>> 10: [mem 0xfe100000-0xfe1001ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288539] pci 0000:00:14.4: PCI >>> bridge to [bus 06-06] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288606] pci 0000:00:14.4: >>> bridge window [mem 0xfe100000-0xfe1fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.288609] pci 0000:00:14.4: >>> bridge window [io 0x0000-0x03af] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288611] pci 0000:00:14.4: >>> bridge window [io 0x03e0-0x0cf7] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288612] pci 0000:00:14.4: >>> bridge window [io 0x03b0-0x03df] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288614] pci 0000:00:14.4: >>> bridge window [io 0x0d00-0xffff] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288616] pci 0000:00:14.4: >>> bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288617] pci 0000:00:14.4: >>> bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288619] pci 0000:00:14.4: >>> bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) >>> Nov 8 23:05:54 knummi kernel: [ 0.288633] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288706] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0.P0PC._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288750] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0.PC02._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288765] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0.PC04._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288781] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0.PC06._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288803] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0.PC07._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288820] ACPI: PCI Interrupt >>> Routing Table [\_SB_.PCI0.PC0A._PRT] >>> Nov 8 23:05:54 knummi kernel: [ 0.288837] pci0000:00: Requesting >>> ACPI _OSC control (0x1d) >>> Nov 8 23:05:54 knummi kernel: [ 0.288899] pci0000:00: ACPI _OSC >>> request failed (AE_NOT_FOUND), returned control mask: 0x1d >>> Nov 8 23:05:54 knummi kernel: [ 0.288966] ACPI _OSC control for >>> PCIe not granted, disabling ASPM >>> Nov 8 23:05:54 knummi kernel: [ 0.292238] ACPI: PCI Interrupt Link >>> [LNKA] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.292665] ACPI: PCI Interrupt Link >>> [LNKB] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.293088] ACPI: PCI Interrupt Link >>> [LNKC] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.293512] ACPI: PCI Interrupt Link >>> [LNKD] (IRQs 3 4 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.293929] ACPI: PCI Interrupt Link >>> [LNKE] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.294329] ACPI: PCI Interrupt Link >>> [LNKF] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.294738] ACPI: PCI Interrupt Link >>> [LNKG] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.295145] ACPI: PCI Interrupt Link >>> [LNKH] (IRQs 4 7 10 11 14 15) *0 >>> Nov 8 23:05:54 knummi kernel: [ 0.295572] vgaarb: device added: >>> PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none >>> Nov 8 23:05:54 knummi kernel: [ 0.295572] vgaarb: loaded >>> Nov 8 23:05:54 knummi kernel: [ 0.295572] vgaarb: bridge control >>> possible 0000:01:00.0 >>> Nov 8 23:05:54 knummi kernel: [ 0.295572] SCSI subsystem initialized >>> Nov 8 23:05:54 knummi kernel: [ 0.295974] libata version 3.00 >>> loaded. >>> Nov 8 23:05:54 knummi kernel: [ 0.296041] wmi: Mapper loaded >>> Nov 8 23:05:54 knummi kernel: [ 0.296097] PCI: Using ACPI for IRQ >>> routing >>> Nov 8 23:05:54 knummi kernel: [ 0.302191] PCI: pci_cache_line_size >>> set to 64 bytes >>> Nov 8 23:05:54 knummi kernel: [ 0.302260] reserve RAM buffer: >>> 000000000009d800 - 000000000009ffff >>> Nov 8 23:05:54 knummi kernel: [ 0.302262] reserve RAM buffer: >>> 00000000cd952000 - 00000000cfffffff >>> Nov 8 23:05:54 knummi kernel: [ 0.302265] reserve RAM buffer: >>> 00000000cdf00000 - 00000000cfffffff >>> Nov 8 23:05:54 knummi kernel: [ 0.302316] NetLabel: Initializing >>> Nov 8 23:05:54 knummi kernel: [ 0.302372] NetLabel: domain hash >>> size = 128 >>> Nov 8 23:05:54 knummi kernel: [ 0.302430] NetLabel: protocols = >>> UNLABELED CIPSOv4 >>> Nov 8 23:05:54 knummi kernel: [ 0.302497] NetLabel: unlabeled >>> traffic allowed by default >>> Nov 8 23:05:54 knummi kernel: [ 0.302568] hpet0: at MMIO >>> 0xfed00000, IRQs 2, 8, 0 >>> Nov 8 23:05:54 knummi kernel: [ 0.302568] hpet0: 3 comparators, >>> 32-bit 14.318180 MHz counter >>> Nov 8 23:05:54 knummi kernel: [ 0.303987] Switching to >>> clocksource hpet >>> Nov 8 23:05:54 knummi kernel: [ 0.305972] Switched to NOHz mode >>> on CPU #3 >>> Nov 8 23:05:54 knummi kernel: [ 0.305975] Switched to NOHz mode >>> on CPU #2 >>> Nov 8 23:05:54 knummi kernel: [ 0.305978] Switched to NOHz mode >>> on CPU #1 >>> Nov 8 23:05:54 knummi kernel: [ 0.305979] Switched to NOHz mode >>> on CPU #0 >>> Nov 8 23:05:54 knummi kernel: [ 0.308983] AppArmor: AppArmor >>> Filesystem Enabled >>> Nov 8 23:05:54 knummi kernel: [ 0.309064] pnp: PnP ACPI init >>> Nov 8 23:05:54 knummi kernel: [ 0.309127] ACPI: bus type pnp >>> registered >>> Nov 8 23:05:54 knummi kernel: [ 0.309269] pnp 00:00: [bus 00-ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309271] pnp 00:00: [io >>> 0x0cf8-0x0cff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309273] pnp 00:00: [io >>> 0x0000-0x03af window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309274] pnp 00:00: [io >>> 0x03e0-0x0cf7 window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309275] pnp 00:00: [io >>> 0x03b0-0x03df window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309277] pnp 00:00: [io >>> 0x0d00-0xffff window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309278] pnp 00:00: [mem >>> 0x000a0000-0x000bffff window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309280] pnp 00:00: [mem >>> 0x000c0000-0x000dffff window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309281] pnp 00:00: [mem >>> 0xd0000000-0xffffffff window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309282] pnp 00:00: [mem >>> 0x00000000 window] >>> Nov 8 23:05:54 knummi kernel: [ 0.309312] pnp 00:00: Plug and Play >>> ACPI device, IDs PNP0a03 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.309331] pnp 00:01: [mem >>> 0xe0000000-0xefffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309363] system 00:01: [mem >>> 0xe0000000-0xefffffff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.309427] system 00:01: Plug and >>> Play ACPI device, IDs PNP0c01 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.309708] pnp 00:02: [io 0x040b] >>> Nov 8 23:05:54 knummi kernel: [ 0.309709] pnp 00:02: [io 0x04d6] >>> Nov 8 23:05:54 knummi kernel: [ 0.309710] pnp 00:02: [io >>> 0x0c00-0x0c01] >>> Nov 8 23:05:54 knummi kernel: [ 0.309712] pnp 00:02: [io 0x0c14] >>> Nov 8 23:05:54 knummi kernel: [ 0.309713] pnp 00:02: [io >>> 0x0c50-0x0c51] >>> Nov 8 23:05:54 knummi kernel: [ 0.309714] pnp 00:02: [io 0x0c52] >>> Nov 8 23:05:54 knummi kernel: [ 0.309715] pnp 00:02: [io 0x0c6c] >>> Nov 8 23:05:54 knummi kernel: [ 0.309716] pnp 00:02: [io 0x0c6f] >>> Nov 8 23:05:54 knummi kernel: [ 0.309717] pnp 00:02: [io >>> 0x0cd0-0x0cd1] >>> Nov 8 23:05:54 knummi kernel: [ 0.309718] pnp 00:02: [io >>> 0x0cd2-0x0cd3] >>> Nov 8 23:05:54 knummi kernel: [ 0.309720] pnp 00:02: [io >>> 0x0cd4-0x0cd5] >>> Nov 8 23:05:54 knummi kernel: [ 0.309721] pnp 00:02: [io >>> 0x0cd6-0x0cd7] >>> Nov 8 23:05:54 knummi kernel: [ 0.309722] pnp 00:02: [io >>> 0x0cd8-0x0cdf] >>> Nov 8 23:05:54 knummi kernel: [ 0.309723] pnp 00:02: [io >>> 0x0800-0x089f] >>> Nov 8 23:05:54 knummi kernel: [ 0.309725] pnp 00:02: [io >>> 0x0000-0xffffffffffffffff disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.309726] pnp 00:02: [io >>> 0x0000-0x000f] >>> Nov 8 23:05:54 knummi kernel: [ 0.309727] pnp 00:02: [io >>> 0x0b20-0x0b3f] >>> Nov 8 23:05:54 knummi kernel: [ 0.309728] pnp 00:02: [io >>> 0x0900-0x090f] >>> Nov 8 23:05:54 knummi kernel: [ 0.309730] pnp 00:02: [io >>> 0x0910-0x091f] >>> Nov 8 23:05:54 knummi kernel: [ 0.309731] pnp 00:02: [io >>> 0xfe00-0xfefe] >>> Nov 8 23:05:54 knummi kernel: [ 0.309732] pnp 00:02: [io >>> 0x0060-0x005f disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.309734] pnp 00:02: [io >>> 0x0064-0x0063 disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.309735] pnp 00:02: [mem >>> 0xfec00000-0xfec00fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309736] pnp 00:02: [mem >>> 0xfee00000-0xfee00fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309738] pnp 00:02: [mem >>> 0xfed80000-0xfed8ffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309740] pnp 00:02: [mem >>> 0xfed61000-0xfed70fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309742] pnp 00:02: [mem >>> 0xfec10000-0xfec10fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309743] pnp 00:02: [mem >>> 0xfed00000-0xfed00fff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309745] pnp 00:02: [mem >>> 0xffc00000-0xffffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.309795] system 00:02: [io >>> 0x040b] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.309855] system 00:02: [io >>> 0x04d6] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.309915] system 00:02: [io >>> 0x0c00-0x0c01] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.309977] system 00:02: [io >>> 0x0c14] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310044] system 00:02: [io >>> 0x0c50-0x0c51] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310105] system 00:02: [io >>> 0x0c52] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310165] system 00:02: [io >>> 0x0c6c] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310225] system 00:02: [io >>> 0x0c6f] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310286] system 00:02: [io >>> 0x0cd0-0x0cd1] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310347] system 00:02: [io >>> 0x0cd2-0x0cd3] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310409] system 00:02: [io >>> 0x0cd4-0x0cd5] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310470] system 00:02: [io >>> 0x0cd6-0x0cd7] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310531] system 00:02: [io >>> 0x0cd8-0x0cdf] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310593] system 00:02: [io >>> 0x0800-0x089f] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310654] system 00:02: [io >>> 0x0b20-0x0b3f] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310716] system 00:02: [io >>> 0x0900-0x090f] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310777] system 00:02: [io >>> 0x0910-0x091f] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310839] system 00:02: [io >>> 0xfe00-0xfefe] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310900] system 00:02: [mem >>> 0xfec00000-0xfec00fff] could not be reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.310964] system 00:02: [mem >>> 0xfee00000-0xfee00fff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311032] system 00:02: [mem >>> 0xfed80000-0xfed8ffff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311095] system 00:02: [mem >>> 0xfed61000-0xfed70fff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311157] system 00:02: [mem >>> 0xfec10000-0xfec10fff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311222] system 00:02: [mem >>> 0xfed00000-0xfed00fff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311284] system 00:02: [mem >>> 0xffc00000-0xffffffff] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311348] system 00:02: Plug and >>> Play ACPI device, IDs PNP0c02 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311413] pnp 00:03: [io >>> 0x0000-0xffffffffffffffff disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.311415] pnp 00:03: [io >>> 0x0290-0x02af] >>> Nov 8 23:05:54 knummi kernel: [ 0.311416] pnp 00:03: [io >>> 0x0000-0xffffffffffffffff disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.311443] system 00:03: [io >>> 0x0290-0x02af] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311504] system 00:03: Plug and >>> Play ACPI device, IDs PNP0c02 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311513] pnp 00:04: [dma 4] >>> Nov 8 23:05:54 knummi kernel: [ 0.311514] pnp 00:04: [io >>> 0x0000-0x000f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311515] pnp 00:04: [io >>> 0x0081-0x0083] >>> Nov 8 23:05:54 knummi kernel: [ 0.311517] pnp 00:04: [io 0x0087] >>> Nov 8 23:05:54 knummi kernel: [ 0.311518] pnp 00:04: [io >>> 0x0089-0x008b] >>> Nov 8 23:05:54 knummi kernel: [ 0.311519] pnp 00:04: [io 0x008f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311520] pnp 00:04: [io >>> 0x00c0-0x00df] >>> Nov 8 23:05:54 knummi kernel: [ 0.311534] pnp 00:04: Plug and Play >>> ACPI device, IDs PNP0200 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311540] pnp 00:05: [io >>> 0x0070-0x0071] >>> Nov 8 23:05:54 knummi kernel: [ 0.311546] pnp 00:05: [irq 8] >>> Nov 8 23:05:54 knummi kernel: [ 0.311560] pnp 00:05: Plug and Play >>> ACPI device, IDs PNP0b00 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311564] pnp 00:06: [io 0x0061] >>> Nov 8 23:05:54 knummi kernel: [ 0.311577] pnp 00:06: Plug and Play >>> ACPI device, IDs PNP0800 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311590] pnp 00:07: [io >>> 0x0010-0x001f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311591] pnp 00:07: [io >>> 0x0022-0x003f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311592] pnp 00:07: [io >>> 0x0044-0x005f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311593] pnp 00:07: [io >>> 0x0062-0x0063] >>> Nov 8 23:05:54 knummi kernel: [ 0.311594] pnp 00:07: [io >>> 0x0065-0x006f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311596] pnp 00:07: [io >>> 0x0072-0x007f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311597] pnp 00:07: [io 0x0080] >>> Nov 8 23:05:54 knummi kernel: [ 0.311598] pnp 00:07: [io >>> 0x0084-0x0086] >>> Nov 8 23:05:54 knummi kernel: [ 0.311599] pnp 00:07: [io 0x0088] >>> Nov 8 23:05:54 knummi kernel: [ 0.311600] pnp 00:07: [io >>> 0x008c-0x008e] >>> Nov 8 23:05:54 knummi kernel: [ 0.311601] pnp 00:07: [io >>> 0x0090-0x009f] >>> Nov 8 23:05:54 knummi kernel: [ 0.311603] pnp 00:07: [io >>> 0x00a2-0x00bf] >>> Nov 8 23:05:54 knummi kernel: [ 0.311604] pnp 00:07: [io >>> 0x00e0-0x00ef] >>> Nov 8 23:05:54 knummi kernel: [ 0.311605] pnp 00:07: [io >>> 0x04d0-0x04d1] >>> Nov 8 23:05:54 knummi kernel: [ 0.311639] system 00:07: [io >>> 0x04d0-0x04d1] has been reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.311701] system 00:07: Plug and >>> Play ACPI device, IDs PNP0c02 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311706] pnp 00:08: [io >>> 0x00f0-0x00ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.311709] pnp 00:08: [irq 13] >>> Nov 8 23:05:54 knummi kernel: [ 0.311723] pnp 00:08: Plug and Play >>> ACPI device, IDs PNP0c04 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311755] system 00:09: Plug and >>> Play ACPI device, IDs PNP0c02 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311767] pnp 00:0a: [io 0x0060] >>> Nov 8 23:05:54 knummi kernel: [ 0.311769] pnp 00:0a: [io 0x0064] >>> Nov 8 23:05:54 knummi kernel: [ 0.311771] pnp 00:0a: [irq 1] >>> Nov 8 23:05:54 knummi kernel: [ 0.311790] pnp 00:0a: Plug and Play >>> ACPI device, IDs PNP0303 PNP030b (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311860] pnp 00:0b: [mem >>> 0x00000000-0xffffffffffffffff disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.311891] system 00:0b: Plug and >>> Play ACPI device, IDs PNP0c02 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.311940] pnp 00:0c: [mem >>> 0x00000000-0xffffffffffffffff disabled] >>> Nov 8 23:05:54 knummi kernel: [ 0.311942] pnp 00:0c: [mem >>> 0xfec20000-0xfec200ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.311973] system 00:0c: [mem >>> 0xfec20000-0xfec200ff] could not be reserved >>> Nov 8 23:05:54 knummi kernel: [ 0.312043] system 00:0c: Plug and >>> Play ACPI device, IDs PNP0c02 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.312127] pnp 00:0d: [mem >>> 0xfed00000-0xfed003ff] >>> Nov 8 23:05:54 knummi kernel: [ 0.312152] pnp 00:0d: Plug and Play >>> ACPI device, IDs PNP0103 (active) >>> Nov 8 23:05:54 knummi kernel: [ 0.312156] pnp: PnP ACPI: found 14 >>> devices >>> Nov 8 23:05:54 knummi kernel: [ 0.312214] ACPI: ACPI bus type pnp >>> unregistered >>> Nov 8 23:05:54 knummi kernel: [ 0.318596] pci 0000:05:00.0: no >>> compatible bridge window for [mem 0xfffe0000-0xffffffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.318678] PCI: max bus depth: 1 >>> pci_try_num: 2 >>> Nov 8 23:05:54 knummi kernel: [ 0.318699] pci 0000:00:06.0: BAR >>> 15: assigned [mem 0xda000000-0xda0fffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.318777] pci 0000:00:0a.0: BAR >>> 15: assigned [mem 0xda200000-0xda2fffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.318855] pci 0000:00:02.0: PCI >>> bridge to [bus 01-01] >>> Nov 8 23:05:54 knummi kernel: [ 0.318916] pci 0000:00:02.0: >>> bridge window [io 0xe000-0xefff] >>> Nov 8 23:05:54 knummi kernel: [ 0.318978] pci 0000:00:02.0: >>> bridge window [mem 0xfd000000-0xfe0fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.319047] pci 0000:00:02.0: >>> bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.319126] pci 0000:00:04.0: PCI >>> bridge to [bus 02-02] >>> Nov 8 23:05:54 knummi kernel: [ 0.319187] pci 0000:00:04.0: >>> bridge window [io 0xd000-0xdfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.319250] pci 0000:00:04.0: >>> bridge window [mem 0xda100000-0xda1fffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.319330] pci 0000:03:00.0: BAR 6: >>> assigned [mem 0xda000000-0xda00ffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.319407] pci 0000:00:06.0: PCI >>> bridge to [bus 03-03] >>> Nov 8 23:05:54 knummi kernel: [ 0.319467] pci 0000:00:06.0: >>> bridge window [io 0xc000-0xcfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.319529] pci 0000:00:06.0: >>> bridge window [mem 0xfe400000-0xfe4fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.319593] pci 0000:00:06.0: >>> bridge window [mem 0xda000000-0xda0fffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.319671] pci 0000:00:07.0: PCI >>> bridge to [bus 04-04] >>> Nov 8 23:05:54 knummi kernel: [ 0.319732] pci 0000:00:07.0: >>> bridge window [mem 0xfe300000-0xfe3fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.319797] pci 0000:05:00.0: BAR 6: >>> assigned [mem 0xda200000-0xda21ffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.319874] pci 0000:00:0a.0: PCI >>> bridge to [bus 05-05] >>> Nov 8 23:05:54 knummi kernel: [ 0.319934] pci 0000:00:0a.0: >>> bridge window [io 0xb000-0xbfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.319997] pci 0000:00:0a.0: >>> bridge window [mem 0xfe200000-0xfe2fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320065] pci 0000:00:0a.0: >>> bridge window [mem 0xda200000-0xda2fffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.320144] pci 0000:00:14.4: PCI >>> bridge to [bus 06-06] >>> Nov 8 23:05:54 knummi kernel: [ 0.320206] pci 0000:00:14.4: >>> bridge window [mem 0xfe100000-0xfe1fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320281] pci 0000:00:02.0: PCI >>> INT A -> GSI 52 (level, low) -> IRQ 52 >>> Nov 8 23:05:54 knummi kernel: [ 0.320345] pci 0000:00:02.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.320349] pci 0000:00:04.0: PCI >>> INT A -> GSI 52 (level, low) -> IRQ 52 >>> Nov 8 23:05:54 knummi kernel: [ 0.320412] pci 0000:00:04.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.320417] pci 0000:00:06.0: PCI >>> INT A -> GSI 53 (level, low) -> IRQ 53 >>> Nov 8 23:05:54 knummi kernel: [ 0.320481] pci 0000:00:06.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.320484] pci 0000:00:07.0: PCI >>> INT A -> GSI 53 (level, low) -> IRQ 53 >>> Nov 8 23:05:54 knummi kernel: [ 0.320547] pci 0000:00:07.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.320552] pci 0000:00:0a.0: PCI >>> INT A -> GSI 54 (level, low) -> IRQ 54 >>> Nov 8 23:05:54 knummi kernel: [ 0.320615] pci 0000:00:0a.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.320620] pci_bus 0000:00: >>> resource 4 [io 0x0000-0x03af] >>> Nov 8 23:05:54 knummi kernel: [ 0.320622] pci_bus 0000:00: >>> resource 5 [io 0x03e0-0x0cf7] >>> Nov 8 23:05:54 knummi kernel: [ 0.320623] pci_bus 0000:00: >>> resource 6 [io 0x03b0-0x03df] >>> Nov 8 23:05:54 knummi kernel: [ 0.320625] pci_bus 0000:00: >>> resource 7 [io 0x0d00-0xffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320626] pci_bus 0000:00: >>> resource 8 [mem 0x000a0000-0x000bffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320628] pci_bus 0000:00: >>> resource 9 [mem 0x000c0000-0x000dffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320629] pci_bus 0000:00: >>> resource 10 [mem 0xd0000000-0xffffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320631] pci_bus 0000:01: >>> resource 0 [io 0xe000-0xefff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320632] pci_bus 0000:01: >>> resource 1 [mem 0xfd000000-0xfe0fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320634] pci_bus 0000:01: >>> resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.320636] pci_bus 0000:02: >>> resource 0 [io 0xd000-0xdfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320637] pci_bus 0000:02: >>> resource 2 [mem 0xda100000-0xda1fffff 64bit pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.320639] pci_bus 0000:03: >>> resource 0 [io 0xc000-0xcfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320640] pci_bus 0000:03: >>> resource 1 [mem 0xfe400000-0xfe4fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320642] pci_bus 0000:03: >>> resource 2 [mem 0xda000000-0xda0fffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.320644] pci_bus 0000:04: >>> resource 1 [mem 0xfe300000-0xfe3fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320645] pci_bus 0000:05: >>> resource 0 [io 0xb000-0xbfff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320647] pci_bus 0000:05: >>> resource 1 [mem 0xfe200000-0xfe2fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320648] pci_bus 0000:05: >>> resource 2 [mem 0xda200000-0xda2fffff pref] >>> Nov 8 23:05:54 knummi kernel: [ 0.320650] pci_bus 0000:06: >>> resource 1 [mem 0xfe100000-0xfe1fffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320652] pci_bus 0000:06: >>> resource 4 [io 0x0000-0x03af] >>> Nov 8 23:05:54 knummi kernel: [ 0.320653] pci_bus 0000:06: >>> resource 5 [io 0x03e0-0x0cf7] >>> Nov 8 23:05:54 knummi kernel: [ 0.320655] pci_bus 0000:06: >>> resource 6 [io 0x03b0-0x03df] >>> Nov 8 23:05:54 knummi kernel: [ 0.320656] pci_bus 0000:06: >>> resource 7 [io 0x0d00-0xffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320657] pci_bus 0000:06: >>> resource 8 [mem 0x000a0000-0x000bffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320659] pci_bus 0000:06: >>> resource 9 [mem 0x000c0000-0x000dffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320661] pci_bus 0000:06: >>> resource 10 [mem 0xd0000000-0xffffffff] >>> Nov 8 23:05:54 knummi kernel: [ 0.320682] NET: Registered protocol >>> family 2 >>> Nov 8 23:05:54 knummi kernel: [ 0.320898] IP route cache hash >>> table entries: 262144 (order: 9, 2097152 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.321942] TCP established hash >>> table entries: 524288 (order: 11, 8388608 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.323880] TCP bind hash table >>> entries: 65536 (order: 8, 1048576 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.324178] TCP: Hash tables >>> configured (established 524288 bind 65536) >>> Nov 8 23:05:54 knummi kernel: [ 0.324241] TCP reno registered >>> Nov 8 23:05:54 knummi kernel: [ 0.324308] UDP hash table entries: >>> 4096 (order: 5, 131072 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.324411] UDP-Lite hash table >>> entries: 4096 (order: 5, 131072 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.324565] NET: Registered protocol >>> family 1 >>> Nov 8 23:05:54 knummi kernel: [ 0.408135] pci 0000:01:00.0: Boot >>> video device >>> Nov 8 23:05:54 knummi kernel: [ 0.408176] PCI: CLS 64 bytes, >>> default 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.408211] Trying to unpack rootfs >>> image as initramfs... >>> Nov 8 23:05:54 knummi kernel: [ 0.555355] Freeing initrd memory: >>> 11012k freed >>> Nov 8 23:05:54 knummi kernel: [ 0.559233] PCI-DMA: Disabling AGP. >>> Nov 8 23:05:54 knummi kernel: [ 0.559357] PCI-DMA: aperture base @ >>> f8000000 size 65536 KB >>> Nov 8 23:05:54 knummi kernel: [ 0.559418] init_memory_mapping: >>> 00000000f8000000-00000000fc000000 >>> Nov 8 23:05:54 knummi kernel: [ 0.559480] 00f8000000 - >>> 00fc000000 page 2M >>> Nov 8 23:05:54 knummi kernel: [ 0.559484] PCI-DMA: using GART IOMMU. >>> Nov 8 23:05:54 knummi kernel: [ 0.559542] PCI-DMA: Reserving 64MB >>> of IOMMU area in the AGP aperture >>> Nov 8 23:05:54 knummi kernel: [ 0.562673] audit: initializing >>> netlink socket (disabled) >>> Nov 8 23:05:54 knummi kernel: [ 0.562747] type=2000 >>> audit(1320786340.561:1): initialized >>> Nov 8 23:05:54 knummi kernel: [ 0.592518] HugeTLB registered 2 MB >>> page size, pre-allocated 0 pages >>> Nov 8 23:05:54 knummi kernel: [ 0.627654] VFS: Disk quotas >>> dquot_6.5.2 >>> Nov 8 23:05:54 knummi kernel: [ 0.627760] Dquot-cache hash table >>> entries: 512 (order 0, 4096 bytes) >>> Nov 8 23:05:54 knummi kernel: [ 0.628431] fuse init (API version >>> 7.17) >>> Nov 8 23:05:54 knummi kernel: [ 0.628573] msgmni has been set to >>> 16024 >>> Nov 8 23:05:54 knummi kernel: [ 0.628830] Block layer SCSI generic >>> (bsg) driver version 0.4 loaded (major 253) >>> Nov 8 23:05:54 knummi kernel: [ 0.628908] io scheduler noop >>> registered >>> Nov 8 23:05:54 knummi kernel: [ 0.630183] io scheduler deadline >>> registered >>> Nov 8 23:05:54 knummi kernel: [ 0.630275] io scheduler cfq >>> registered (default) >>> Nov 8 23:05:54 knummi kernel: [ 0.630709] pci_hotplug: PCI Hot >>> Plug PCI Core version: 0.5 >>> Nov 8 23:05:54 knummi kernel: [ 0.630781] pciehp: PCI Express Hot >>> Plug Controller Driver version: 0.4 >>> Nov 8 23:05:54 knummi kernel: [ 0.630941] input: Power Button as >>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 >>> Nov 8 23:05:54 knummi kernel: [ 0.631044] ACPI: Power Button [PWRB] >>> Nov 8 23:05:54 knummi kernel: [ 0.631123] input: Power Button as >>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 >>> Nov 8 23:05:54 knummi kernel: [ 0.631201] ACPI: Power Button [PWRF] >>> Nov 8 23:05:54 knummi kernel: [ 0.631371] ACPI: acpi_idle >>> registered with cpuidle >>> Nov 8 23:05:54 knummi kernel: [ 0.631394] ACPI: processor limited >>> to max C-state 1 >>> Nov 8 23:05:54 knummi kernel: [ 0.677472] ERST: Table is not found! >>> Nov 8 23:05:54 knummi kernel: [ 0.677590] Serial: 8250/16550 >>> driver, 4 ports, IRQ sharing enabled >>> Nov 8 23:05:54 knummi kernel: [ 0.679298] Linux agpgart interface >>> v0.103 >>> Nov 8 23:05:54 knummi kernel: [ 0.680123] brd: module loaded >>> Nov 8 23:05:54 knummi kernel: [ 0.680571] loop: module loaded >>> Nov 8 23:05:54 knummi kernel: [ 0.680783] ahci 0000:00:11.0: >>> version 3.0 >>> Nov 8 23:05:54 knummi kernel: [ 0.680799] ahci 0000:00:11.0: PCI >>> INT A -> GSI 19 (level, low) -> IRQ 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.680957] ahci 0000:00:11.0: AHCI >>> 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode >>> Nov 8 23:05:54 knummi kernel: [ 0.681059] ahci 0000:00:11.0: >>> flags: 64bit ncq sntf ilck pm led clo pmp pio slum part >>> Nov 8 23:05:54 knummi kernel: [ 0.681601] scsi0 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.681720] scsi1 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.681819] scsi2 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.681920] scsi3 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.682035] scsi4 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.682136] scsi5 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.682368] ata1: SATA max UDMA/133 >>> abar m1024@0xfe50b000 port 0xfe50b100 irq 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.682447] ata2: SATA max UDMA/133 >>> abar m1024@0xfe50b000 port 0xfe50b180 irq 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.682525] ata3: SATA max UDMA/133 >>> abar m1024@0xfe50b000 port 0xfe50b200 irq 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.682603] ata4: SATA max UDMA/133 >>> abar m1024@0xfe50b000 port 0xfe50b280 irq 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.682681] ata5: SATA max UDMA/133 >>> abar m1024@0xfe50b000 port 0xfe50b300 irq 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.682759] ata6: SATA max UDMA/133 >>> abar m1024@0xfe50b000 port 0xfe50b380 irq 19 >>> Nov 8 23:05:54 knummi kernel: [ 0.682945] ahci 0000:03:00.0: PCI >>> INT A -> GSI 51 (level, low) -> IRQ 51 >>> Nov 8 23:05:54 knummi kernel: [ 0.683109] ahci 0000:03:00.0: AHCI >>> 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode >>> Nov 8 23:05:54 knummi kernel: [ 0.683197] ahci 0000:03:00.0: >>> flags: 64bit ncq pm led clo pmp pio slum part >>> Nov 8 23:05:54 knummi kernel: [ 0.683263] ahci 0000:03:00.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 0.683438] scsi6 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.683536] scsi7 : ahci >>> Nov 8 23:05:54 knummi kernel: [ 0.683631] ata7: SATA max UDMA/133 >>> abar m512@0xfe410000 port 0xfe410100 irq 51 >>> Nov 8 23:05:54 knummi kernel: [ 0.683709] ata8: SATA max UDMA/133 >>> abar m512@0xfe410000 port 0xfe410180 irq 51 >>> Nov 8 23:05:54 knummi kernel: [ 0.683967] Fixed MDIO Bus: probed >>> Nov 8 23:05:54 knummi kernel: [ 0.684064] PPP generic driver >>> version 2.4.2 >>> Nov 8 23:05:54 knummi kernel: [ 0.684157] tun: Universal TUN/TAP >>> device driver, 1.6 >>> Nov 8 23:05:54 knummi kernel: [ 0.684216] tun: (C) 1999-2004 Max >>> Krasnyansky <maxk@xxxxxxxxxxxx> >>> Nov 8 23:05:54 knummi kernel: [ 0.684338] i8042: PNP: PS/2 >>> Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 >>> Nov 8 23:05:54 knummi kernel: [ 0.684400] i8042: PNP: PS/2 appears >>> to have AUX port disabled, if this is incorrect please boot with >>> i8042.nopnp >>> Nov 8 23:05:54 knummi kernel: [ 0.684586] serio: i8042 KBD port at >>> 0x60,0x64 irq 1 >>> Nov 8 23:05:54 knummi kernel: [ 0.684706] mousedev: PS/2 mouse >>> device common for all mice >>> Nov 8 23:05:54 knummi kernel: [ 0.684854] rtc_cmos 00:05: RTC can >>> wake from S4 >>> Nov 8 23:05:54 knummi kernel: [ 0.684977] rtc_cmos 00:05: rtc >>> core: registered rtc_cmos as rtc0 >>> Nov 8 23:05:54 knummi kernel: [ 0.685078] rtc0: alarms up to one >>> month, y3k, 114 bytes nvram, hpet irqs >>> Nov 8 23:05:54 knummi kernel: [ 0.685146] md: raid1 personality >>> registered for level 1 >>> Nov 8 23:05:54 knummi kernel: [ 0.685284] device-mapper: uevent: >>> version 1.0.3 >>> Nov 8 23:05:54 knummi kernel: [ 0.685400] device-mapper: ioctl: >>> 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx >>> Nov 8 23:05:54 knummi kernel: [ 0.685549] device-mapper: >>> multipath: version 1.3.0 loaded >>> Nov 8 23:05:54 knummi kernel: [ 0.685611] device-mapper: multipath >>> round-robin: version 1.0.0 loaded >>> Nov 8 23:05:54 knummi kernel: [ 0.685747] cpuidle: using governor >>> ladder >>> Nov 8 23:05:54 knummi kernel: [ 0.685805] cpuidle: using governor >>> menu >>> Nov 8 23:05:54 knummi kernel: [ 0.685863] EFI Variables Facility >>> v0.08 2004-May-17 >>> Nov 8 23:05:54 knummi kernel: [ 0.686063] TCP cubic registered >>> Nov 8 23:05:54 knummi kernel: [ 0.686236] NET: Registered protocol >>> family 10 >>> Nov 8 23:05:54 knummi kernel: [ 0.686578] NET: Registered protocol >>> family 17 >>> Nov 8 23:05:54 knummi kernel: [ 0.686644] Registering the >>> dns_resolver key type >>> Nov 8 23:05:54 knummi kernel: [ 0.686802] PM: Hibernation image >>> not present or could not be loaded. >>> Nov 8 23:05:54 knummi kernel: [ 0.686810] registered taskstats >>> version 1 >>> Nov 8 23:05:54 knummi kernel: [ 0.703994] Magic number: 3:373:95 >>> Nov 8 23:05:54 knummi kernel: [ 0.704150] rtc_cmos 00:05: setting >>> system clock to 2011-11-08 21:05:42 UTC (1320786342) >>> Nov 8 23:05:54 knummi kernel: [ 0.704241] powernow-k8: Found 1 AMD >>> Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00) >>> Nov 8 23:05:54 knummi kernel: [ 0.704359] powernow-k8: 0 : >>> pstate 0 (3400 MHz) >>> Nov 8 23:05:54 knummi kernel: [ 0.704418] powernow-k8: 1 : >>> pstate 1 (2700 MHz) >>> Nov 8 23:05:54 knummi kernel: [ 0.704477] powernow-k8: 2 : >>> pstate 2 (2200 MHz) >>> Nov 8 23:05:54 knummi kernel: [ 0.704536] powernow-k8: 3 : >>> pstate 3 (800 MHz) >>> Nov 8 23:05:54 knummi kernel: [ 0.704864] BIOS EDD facility v0.16 >>> 2004-Jun-25, 0 devices found >>> Nov 8 23:05:54 knummi kernel: [ 0.704927] EDD information not >>> available. >>> Nov 8 23:05:54 knummi kernel: [ 0.716127] input: AT Translated Set >>> 2 keyboard as /devices/platform/i8042/serio0/input/input2 >>> Nov 8 23:05:54 knummi kernel: [ 0.988095] ata5: SATA link down >>> (SStatus 0 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 0.988190] ata7: SATA link down >>> (SStatus 0 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 0.988281] ata8: SATA link down >>> (SStatus 0 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 1.142072] ata2: SATA link up 3.0 >>> Gbps (SStatus 123 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 1.142151] ata1: SATA link up 3.0 >>> Gbps (SStatus 123 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 1.142225] ata3: SATA link up 3.0 >>> Gbps (SStatus 123 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 1.142874] ata2.00: ATA-8: WDC >>> WD1001FALS-00J7B0, 05.00K05, max UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.142938] ata2.00: 1953525168 >>> sectors, multi 16: LBA48 NCQ (depth 31/32), AA >>> Nov 8 23:05:54 knummi kernel: [ 1.143060] ata4: SATA link up 1.5 >>> Gbps (SStatus 113 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 1.143214] ata3.00: ATA-8: WDC >>> WD1001FALS-00J7B0, 05.00K05, max UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.143278] ata3.00: 1953525168 >>> sectors, multi 16: LBA48 NCQ (depth 31/32), AA >>> Nov 8 23:05:54 knummi kernel: [ 1.144907] ata2.00: configured for >>> UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.145062] ata3.00: configured for >>> UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.179642] ata1.00: ATA-7: >>> ST3160812AS, 3.AAE, max UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.179704] ata1.00: 312581808 >>> sectors, multi 16: LBA48 NCQ (depth 31/32) >>> Nov 8 23:05:54 knummi kernel: [ 1.188892] ata4.00: ATA-7: >>> ST3320620AS, 3.AAK, max UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.188954] ata4.00: 625142448 >>> sectors, multi 16: LBA48 NCQ (depth 31/32) >>> Nov 8 23:05:54 knummi kernel: [ 1.238000] ata1.00: configured for >>> UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.238200] scsi 0:0:0:0: >>> Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.238374] sd 0:0:0:0: Attached >>> scsi generic sg0 type 0 >>> Nov 8 23:05:54 knummi kernel: [ 1.238485] sd 0:0:0:0: [sda] >>> 312581808 512-byte logical blocks: (160 GB/149 GiB) >>> Nov 8 23:05:54 knummi kernel: [ 1.238584] scsi 1:0:0:0: >>> Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.238681] sd 0:0:0:0: [sda] Write >>> Protect is off >>> Nov 8 23:05:54 knummi kernel: [ 1.238746] sd 0:0:0:0: [sda] Mode >>> Sense: 00 3a 00 00 >>> Nov 8 23:05:54 knummi kernel: [ 1.238767] sd 1:0:0:0: Attached >>> scsi generic sg1 type 0 >>> Nov 8 23:05:54 knummi kernel: [ 1.238782] sd 0:0:0:0: [sda] Write >>> cache: enabled, read cache: enabled, doesn't support DPO or FUA >>> Nov 8 23:05:54 knummi kernel: [ 1.238816] sd 1:0:0:0: [sdb] >>> 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >>> Nov 8 23:05:54 knummi kernel: [ 1.238935] sd 1:0:0:0: [sdb] Write >>> Protect is off >>> Nov 8 23:05:54 knummi kernel: [ 1.238937] sd 1:0:0:0: [sdb] Mode >>> Sense: 00 3a 00 00 >>> Nov 8 23:05:54 knummi kernel: [ 1.239025] sd 1:0:0:0: [sdb] Write >>> cache: enabled, read cache: enabled, doesn't support DPO or FUA >>> Nov 8 23:05:54 knummi kernel: [ 1.239284] scsi 2:0:0:0: >>> Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.239453] sd 2:0:0:0: [sdc] >>> 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) >>> Nov 8 23:05:54 knummi kernel: [ 1.239463] sd 2:0:0:0: Attached >>> scsi generic sg2 type 0 >>> Nov 8 23:05:54 knummi kernel: [ 1.239656] sd 2:0:0:0: [sdc] Write >>> Protect is off >>> Nov 8 23:05:54 knummi kernel: [ 1.239716] sd 2:0:0:0: [sdc] Mode >>> Sense: 00 3a 00 00 >>> Nov 8 23:05:54 knummi kernel: [ 1.239743] sd 2:0:0:0: [sdc] Write >>> cache: enabled, read cache: enabled, doesn't support DPO or FUA >>> Nov 8 23:05:54 knummi kernel: [ 1.247198] ata4.00: configured for >>> UDMA/133 >>> Nov 8 23:05:54 knummi kernel: [ 1.247321] scsi 3:0:0:0: >>> Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.247474] sd 3:0:0:0: [sdd] >>> 625142448 512-byte logical blocks: (320 GB/298 GiB) >>> Nov 8 23:05:54 knummi kernel: [ 1.247505] sd 3:0:0:0: Attached >>> scsi generic sg3 type 0 >>> Nov 8 23:05:54 knummi kernel: [ 1.247649] sdb: sdb1 sdb2 sdb3 >>> Nov 8 23:05:54 knummi kernel: [ 1.247663] sd 3:0:0:0: [sdd] Write >>> Protect is off >>> Nov 8 23:05:54 knummi kernel: [ 1.247664] sd 3:0:0:0: [sdd] Mode >>> Sense: 00 3a 00 00 >>> Nov 8 23:05:54 knummi kernel: [ 1.247674] sd 3:0:0:0: [sdd] Write >>> cache: enabled, read cache: enabled, doesn't support DPO or FUA >>> Nov 8 23:05:54 knummi kernel: [ 1.248159] sd 1:0:0:0: [sdb] >>> Attached SCSI disk >>> Nov 8 23:05:54 knummi kernel: [ 1.253332] sdc: sdc1 sdc2 sdc3 >>> Nov 8 23:05:54 knummi kernel: [ 1.253668] sd 2:0:0:0: [sdc] >>> Attached SCSI disk >>> Nov 8 23:05:54 knummi kernel: [ 1.277633] sda: sda1 >>> Nov 8 23:05:54 knummi kernel: [ 1.277929] sd 0:0:0:0: [sda] >>> Attached SCSI disk >>> Nov 8 23:05:54 knummi kernel: [ 1.307767] sdd: sdd1 sdd2 >>> Nov 8 23:05:54 knummi kernel: [ 1.307997] sd 3:0:0:0: [sdd] >>> Attached SCSI disk >>> Nov 8 23:05:54 knummi kernel: [ 1.564073] Refined TSC clocksource >>> calibration: 3411.430 MHz. >>> Nov 8 23:05:54 knummi kernel: [ 1.564141] Switching to >>> clocksource tsc >>> Nov 8 23:05:54 knummi kernel: [ 1.704072] ata6: SATA link up 1.5 >>> Gbps (SStatus 113 SControl 300) >>> Nov 8 23:05:54 knummi kernel: [ 1.710033] ata6.00: ATAPI: _NEC >>> DVD_RW ND-1300A, 1.0C, max UDMA/33 >>> Nov 8 23:05:54 knummi kernel: [ 1.710096] ata6.00: applying >>> bridge limits >>> Nov 8 23:05:54 knummi kernel: [ 1.716279] ata6.00: configured for >>> UDMA/33 >>> Nov 8 23:05:54 knummi kernel: [ 1.720525] scsi 5:0:0:0: CD-ROM >>> _NEC DVD_RW ND-1300A 1.0C PQ: 0 ANSI: 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.723254] sr0: scsi3-mmc drive: >>> 40x/40x writer cd/rw xa/form2 cdda tray >>> Nov 8 23:05:54 knummi kernel: [ 1.723318] cdrom: Uniform CD-ROM >>> driver Revision: 3.20 >>> Nov 8 23:05:54 knummi kernel: [ 1.723456] sr 5:0:0:0: Attached >>> scsi CD-ROM sr0 >>> Nov 8 23:05:54 knummi kernel: [ 1.723508] sr 5:0:0:0: Attached >>> scsi generic sg4 type 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.724609] Freeing unused kernel >>> memory: 952k freed >>> Nov 8 23:05:54 knummi kernel: [ 1.724838] Write protecting the >>> kernel read-only data: 10240k >>> Nov 8 23:05:54 knummi kernel: [ 1.725748] Freeing unused kernel >>> memory: 352k freed >>> Nov 8 23:05:54 knummi kernel: [ 1.729051] Freeing unused kernel >>> memory: 1520k freed >>> Nov 8 23:05:54 knummi kernel: [ 1.740766] udev[118]: starting >>> version 163 >>> Nov 8 23:05:54 knummi kernel: [ 1.753413] usbcore: registered new >>> interface driver usbfs >>> Nov 8 23:05:54 knummi kernel: [ 1.753486] usbcore: registered new >>> interface driver hub >>> Nov 8 23:05:54 knummi kernel: [ 1.761229] r8169 Gigabit Ethernet >>> driver 2.3LK-NAPI loaded >>> Nov 8 23:05:54 knummi kernel: [ 1.761315] r8169 0000:02:00.0: PCI >>> INT A -> GSI 44 (level, low) -> IRQ 44 >>> Nov 8 23:05:54 knummi kernel: [ 1.761416] r8169 0000:02:00.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 1.761466] r8169 0000:02:00.0: irq >>> 72 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.761762] r8169 0000:02:00.0: >>> eth0: RTL8168evl/8111evl at 0xffffc90000c6e000, 14:da:e9:52:13:d3, XID >>> 0c900800 IRQ 72 >>> Nov 8 23:05:54 knummi kernel: [ 1.762749] usbcore: registered new >>> device driver usb >>> Nov 8 23:05:54 knummi kernel: [ 1.763442] ehci_hcd: USB 2.0 >>> 'Enhanced' Host Controller (EHCI) Driver >>> Nov 8 23:05:54 knummi kernel: [ 1.763506] ehci_hcd: block sizes: >>> qh 112 qtd 96 itd 192 sitd 96 >>> Nov 8 23:05:54 knummi kernel: [ 1.763604] ehci_hcd 0000:00:12.2: >>> PCI INT B -> GSI 17 (level, low) -> IRQ 17 >>> Nov 8 23:05:54 knummi kernel: [ 1.763685] ehci_hcd 0000:00:12.2: >>> EHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.763820] ehci_hcd 0000:00:12.2: >>> new USB bus registered, assigned bus number 1 >>> Nov 8 23:05:54 knummi kernel: [ 1.763904] ehci_hcd 0000:00:12.2: >>> reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 >>> Nov 8 23:05:54 knummi kernel: [ 1.763907] ehci_hcd 0000:00:12.2: >>> reset hcc_params a072 thresh 7 uframes 256/512/1024 >>> Nov 8 23:05:54 knummi kernel: [ 1.763929] ehci_hcd 0000:00:12.2: >>> debug port 1 >>> Nov 8 23:05:54 knummi kernel: [ 1.763991] ehci_hcd 0000:00:12.2: >>> reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >>> Nov 8 23:05:54 knummi kernel: [ 1.763998] ehci_hcd 0000:00:12.2: >>> MWI active >>> Nov 8 23:05:54 knummi kernel: [ 1.763999] ehci_hcd 0000:00:12.2: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.764096] ehci_hcd 0000:00:12.2: >>> irq 17, io mem 0xfe509000 >>> Nov 8 23:05:54 knummi kernel: [ 1.764338] ohci_hcd: USB 1.1 'Open' >>> Host Controller (OHCI) Driver >>> Nov 8 23:05:54 knummi kernel: [ 1.764339] ohci_hcd: block sizes: >>> ed 80 td 96 >>> Nov 8 23:05:54 knummi kernel: [ 1.765429] ehci_hcd 0000:00:12.2: >>> reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >>> Nov 8 23:05:54 knummi kernel: [ 1.765435] ehci_hcd 0000:00:12.2: >>> init command 0010005 (park)=0 ithresh=1 period=512 RUN >>> Nov 8 23:05:54 knummi kernel: [ 1.766367] r8169 Gigabit Ethernet >>> driver 2.3LK-NAPI loaded >>> Nov 8 23:05:54 knummi kernel: [ 1.766445] r8169 0000:05:00.0: PCI >>> INT A -> GSI 47 (level, low) -> IRQ 47 >>> Nov 8 23:05:54 knummi kernel: [ 1.766531] r8169 0000:05:00.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 1.766578] r8169 0000:05:00.0: irq >>> 73 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.767857] r8169 0000:05:00.0: >>> eth1: RTL8168b/8111b at 0xffffc90000c6c000, 00:25:86:e0:32:a7, XID >>> 18000000 IRQ 73 >>> Nov 8 23:05:54 knummi kernel: [ 1.768283] [drm] Initialized drm >>> 1.1.0 20060810 >>> Nov 8 23:05:54 knummi kernel: [ 1.773093] ehci_hcd 0000:00:12.2: >>> USB 2.0 started, EHCI 1.00 >>> Nov 8 23:05:54 knummi kernel: [ 1.773179] usb usb1: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 1.773184] usb usb1: udev 1, busnum >>> 1, minor = 0 >>> Nov 8 23:05:54 knummi kernel: [ 1.773185] usb usb1: New USB device >>> found, idVendor=1d6b, idProduct=0002 >>> Nov 8 23:05:54 knummi kernel: [ 1.773248] usb usb1: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 1.773326] usb usb1: Product: EHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.773385] usb usb1: Manufacturer: >>> Linux 3.1.0-tmo5 ehci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 1.773445] usb usb1: SerialNumber: >>> 0000:00:12.2 >>> Nov 8 23:05:54 knummi kernel: [ 1.773558] usb usb1: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 1.773560] usb usb1: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 1.773566] usb usb1: adding 1-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 1.773626] hub 1-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 1.773628] hub 1-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 1.773629] hub 1-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 1.773689] hub 1-0:1.0: 5 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 1.773815] hub 1-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 1.773816] hub 1-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 1.773818] hub 1-0:1.0: individual >>> port over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 1.773819] hub 1-0:1.0: power on to >>> power good time: 20ms >>> Nov 8 23:05:54 knummi kernel: [ 1.773823] hub 1-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 1.773824] hub 1-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 1.775533] nouveau 0000:01:00.0: >>> PCI INT A -> GSI 24 (level, low) -> IRQ 24 >>> Nov 8 23:05:54 knummi kernel: [ 1.775601] nouveau 0000:01:00.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 1.776564] [drm] nouveau >>> 0000:01:00.0: Detected an NVc0 generation card (0x0c1080a1) >>> Nov 8 23:05:54 knummi kernel: [ 1.779207] ehci_hcd 0000:00:13.2: >>> PCI INT B -> GSI 21 (level, low) -> IRQ 21 >>> Nov 8 23:05:54 knummi kernel: [ 1.779277] ehci_hcd 0000:00:13.2: >>> EHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.779340] ehci_hcd 0000:00:13.2: >>> new USB bus registered, assigned bus number 2 >>> Nov 8 23:05:54 knummi kernel: [ 1.779424] ehci_hcd 0000:00:13.2: >>> reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 >>> Nov 8 23:05:54 knummi kernel: [ 1.779428] ehci_hcd 0000:00:13.2: >>> reset hcc_params a072 thresh 7 uframes 256/512/1024 >>> Nov 8 23:05:54 knummi kernel: [ 1.779448] ehci_hcd 0000:00:13.2: >>> debug port 1 >>> Nov 8 23:05:54 knummi kernel: [ 1.779509] ehci_hcd 0000:00:13.2: >>> reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >>> Nov 8 23:05:54 knummi kernel: [ 1.779516] ehci_hcd 0000:00:13.2: >>> MWI active >>> Nov 8 23:05:54 knummi kernel: [ 1.779517] ehci_hcd 0000:00:13.2: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.779528] ehci_hcd 0000:00:13.2: >>> irq 21, io mem 0xfe507000 >>> Nov 8 23:05:54 knummi kernel: [ 1.779591] ehci_hcd 0000:00:13.2: >>> reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >>> Nov 8 23:05:54 knummi kernel: [ 1.779596] ehci_hcd 0000:00:13.2: >>> init command 0010005 (park)=0 ithresh=1 period=512 RUN >>> Nov 8 23:05:54 knummi kernel: [ 1.779926] [drm] nouveau >>> 0000:01:00.0: Attempting to load BIOS image from PRAMIN >>> Nov 8 23:05:54 knummi kernel: [ 1.845727] [drm] nouveau >>> 0000:01:00.0: ... appears to be valid >>> Nov 8 23:05:54 knummi kernel: [ 1.845789] [drm] nouveau >>> 0000:01:00.0: BIT BIOS found >>> Nov 8 23:05:54 knummi kernel: [ 1.845853] [drm] nouveau >>> 0000:01:00.0: Bios version 70.08.29.00 >>> Nov 8 23:05:54 knummi kernel: [ 1.845915] [drm] nouveau >>> 0000:01:00.0: TMDS table version 2.0 >>> Nov 8 23:05:54 knummi kernel: [ 1.845978] [drm] nouveau >>> 0000:01:00.0: Found Display Configuration Block version 4.0 >>> Nov 8 23:05:54 knummi kernel: [ 1.846060] [drm] nouveau >>> 0000:01:00.0: Raw DCB entry 0: 01000302 00020030 >>> Nov 8 23:05:54 knummi kernel: [ 1.846124] [drm] nouveau >>> 0000:01:00.0: Raw DCB entry 1: 02000300 00000000 >>> Nov 8 23:05:54 knummi kernel: [ 1.846186] [drm] nouveau >>> 0000:01:00.0: Raw DCB entry 2: 08011392 00020020 >>> Nov 8 23:05:54 knummi kernel: [ 1.846249] [drm] nouveau >>> 0000:01:00.0: Raw DCB entry 3: 04022310 00000000 >>> Nov 8 23:05:54 knummi kernel: [ 1.846313] [drm] nouveau >>> 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 >>> Nov 8 23:05:54 knummi kernel: [ 1.846379] [drm] nouveau >>> 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 >>> Nov 8 23:05:54 knummi kernel: [ 1.846457] [drm] nouveau >>> 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08 >>> Nov 8 23:05:54 knummi kernel: [ 1.846536] [drm] nouveau >>> 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff >>> Nov 8 23:05:54 knummi kernel: [ 1.846616] [drm] nouveau >>> 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6BB6 >>> Nov 8 23:05:54 knummi kernel: [ 1.866851] [drm] nouveau >>> 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x71FC >>> Nov 8 23:05:54 knummi kernel: [ 1.873977] [drm] nouveau >>> 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8391 >>> Nov 8 23:05:54 knummi kernel: [ 1.874057] [drm] nouveau >>> 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8395 >>> Nov 8 23:05:54 knummi kernel: [ 1.874179] [drm] nouveau >>> 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x847D >>> Nov 8 23:05:54 knummi kernel: [ 1.874257] [drm] nouveau >>> 0000:01:00.0: Parsing VBIOS init table at offset 0x84E2 >>> Nov 8 23:05:54 knummi kernel: [ 1.894337] [drm] nouveau >>> 0000:01:00.0: 0x6B29: Condition still not met after 20ms, skipping >>> following opcodes >>> Nov 8 23:05:54 knummi kernel: [ 1.894445] ehci_hcd 0000:00:13.2: >>> USB 2.0 started, EHCI 1.00 >>> Nov 8 23:05:54 knummi kernel: [ 1.894524] usb usb2: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 1.894528] usb usb2: udev 1, busnum >>> 2, minor = 128 >>> Nov 8 23:05:54 knummi kernel: [ 1.894529] usb usb2: New USB device >>> found, idVendor=1d6b, idProduct=0002 >>> Nov 8 23:05:54 knummi kernel: [ 1.894593] usb usb2: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 1.894670] usb usb2: Product: EHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.894730] usb usb2: Manufacturer: >>> Linux 3.1.0-tmo5 ehci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 1.894790] usb usb2: SerialNumber: >>> 0000:00:13.2 >>> Nov 8 23:05:54 knummi kernel: [ 1.894872] xhci_hcd 0000:04:00.0: >>> PCI INT A -> GSI 50 (level, low) -> IRQ 50 >>> Nov 8 23:05:54 knummi kernel: [ 1.894966] usb usb2: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 1.894968] usb usb2: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 1.894973] usb usb2: adding 2-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 1.894985] hub 2-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 1.894987] hub 2-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 1.894988] hub 2-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 1.895056] hub 2-0:1.0: 5 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 1.895113] hub 2-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 1.895114] hub 2-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 1.895116] hub 2-0:1.0: individual >>> port over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 1.895117] hub 2-0:1.0: power on to >>> power good time: 20ms >>> Nov 8 23:05:54 knummi kernel: [ 1.895120] hub 2-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 1.895121] hub 2-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 1.900019] ehci_hcd 0000:00:16.2: >>> PCI INT B -> GSI 23 (level, low) -> IRQ 23 >>> Nov 8 23:05:54 knummi kernel: [ 1.900097] ehci_hcd 0000:00:16.2: >>> EHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.900159] ehci_hcd 0000:00:16.2: >>> new USB bus registered, assigned bus number 3 >>> Nov 8 23:05:54 knummi kernel: [ 1.900241] ehci_hcd 0000:00:16.2: >>> reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4 >>> Nov 8 23:05:54 knummi kernel: [ 1.900244] ehci_hcd 0000:00:16.2: >>> reset hcc_params a072 thresh 7 uframes 256/512/1024 >>> Nov 8 23:05:54 knummi kernel: [ 1.900261] ehci_hcd 0000:00:16.2: >>> debug port 1 >>> Nov 8 23:05:54 knummi kernel: [ 1.900321] ehci_hcd 0000:00:16.2: >>> reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >>> Nov 8 23:05:54 knummi kernel: [ 1.900327] ehci_hcd 0000:00:16.2: >>> MWI active >>> Nov 8 23:05:54 knummi kernel: [ 1.900329] ehci_hcd 0000:00:16.2: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.900338] ehci_hcd 0000:00:16.2: >>> irq 23, io mem 0xfe504000 >>> Nov 8 23:05:54 knummi kernel: [ 1.900401] ehci_hcd 0000:00:16.2: >>> reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT >>> Nov 8 23:05:54 knummi kernel: [ 1.900406] ehci_hcd 0000:00:16.2: >>> init command 0010005 (park)=0 ithresh=1 period=512 RUN >>> Nov 8 23:05:54 knummi kernel: [ 1.900418] xhci_hcd 0000:04:00.0: >>> setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 1.900421] xhci_hcd 0000:04:00.0: >>> xHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.900483] xhci_hcd 0000:04:00.0: >>> new USB bus registered, assigned bus number 4 >>> Nov 8 23:05:54 knummi kernel: [ 1.904943] xhci_hcd 0000:04:00.0: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.904950] xhci_hcd 0000:04:00.0: >>> irq 50, io mem 0xfe300000 >>> Nov 8 23:05:54 knummi kernel: [ 1.905054] xhci_hcd 0000:04:00.0: >>> irq 74 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.905057] xhci_hcd 0000:04:00.0: >>> irq 75 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.905061] xhci_hcd 0000:04:00.0: >>> irq 76 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.905065] xhci_hcd 0000:04:00.0: >>> irq 77 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.905068] xhci_hcd 0000:04:00.0: >>> irq 78 for MSI/MSI-X >>> Nov 8 23:05:54 knummi kernel: [ 1.905119] usb usb4: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 1.905123] usb usb4: udev 1, busnum >>> 4, minor = 384 >>> Nov 8 23:05:54 knummi kernel: [ 1.905124] usb usb4: New USB device >>> found, idVendor=1d6b, idProduct=0002 >>> Nov 8 23:05:54 knummi kernel: [ 1.905187] usb usb4: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 1.905264] usb usb4: Product: xHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.905324] usb usb4: Manufacturer: >>> Linux 3.1.0-tmo5 xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 1.905384] usb usb4: SerialNumber: >>> 0000:04:00.0 >>> Nov 8 23:05:54 knummi kernel: [ 1.906009] ehci_hcd 0000:00:16.2: >>> USB 2.0 started, EHCI 1.00 >>> Nov 8 23:05:54 knummi kernel: [ 1.906100] usb usb4: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 1.906102] usb usb4: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 1.906104] xHCI xhci_add_endpoint >>> called for root hub >>> Nov 8 23:05:54 knummi kernel: [ 1.906105] xHCI >>> xhci_check_bandwidth called for root hub >>> Nov 8 23:05:54 knummi kernel: [ 1.906108] usb usb4: adding 4-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 1.906121] hub 4-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 1.906122] hub 4-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 1.906123] hub 4-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 1.906183] hub 4-0:1.0: 2 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 1.906241] hub 4-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 1.906242] hub 4-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 1.906243] hub 4-0:1.0: individual >>> port over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 1.906245] hub 4-0:1.0: Single TT >>> Nov 8 23:05:54 knummi kernel: [ 1.906246] hub 4-0:1.0: TT requires >>> at most 8 FS bit times (666 ns) >>> Nov 8 23:05:54 knummi kernel: [ 1.906247] hub 4-0:1.0: power on to >>> power good time: 20ms >>> Nov 8 23:05:54 knummi kernel: [ 1.906249] hub 4-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 1.906251] hub 4-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 1.906283] xhci_hcd 0000:04:00.0: >>> xHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.906344] xhci_hcd 0000:04:00.0: >>> new USB bus registered, assigned bus number 5 >>> Nov 8 23:05:54 knummi kernel: [ 1.906424] xhci_hcd 0000:04:00.0: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.906434] usb usb5: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 1.906436] usb usb5: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 1.906439] usb usb5: udev 1, busnum >>> 5, minor = 512 >>> Nov 8 23:05:54 knummi kernel: [ 1.906440] usb usb5: New USB device >>> found, idVendor=1d6b, idProduct=0003 >>> Nov 8 23:05:54 knummi kernel: [ 1.906503] usb usb5: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 1.906580] usb usb5: Product: xHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.906639] usb usb5: Manufacturer: >>> Linux 3.1.0-tmo5 xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 1.906700] usb usb5: SerialNumber: >>> 0000:04:00.0 >>> Nov 8 23:05:54 knummi kernel: [ 1.910029] usb usb5: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 1.910030] usb usb5: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 1.910032] xHCI xhci_add_endpoint >>> called for root hub >>> Nov 8 23:05:54 knummi kernel: [ 1.910033] xHCI >>> xhci_check_bandwidth called for root hub >>> Nov 8 23:05:54 knummi kernel: [ 1.910036] usb usb5: adding 5-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 1.910048] hub 5-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 1.910049] hub 5-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 1.910050] hub 5-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 1.910110] hub 5-0:1.0: 2 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 1.910168] hub 5-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 1.910169] hub 5-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 1.910170] hub 5-0:1.0: individual >>> port over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 1.910171] hub 5-0:1.0: TT requires >>> at most 8 FS bit times (666 ns) >>> Nov 8 23:05:54 knummi kernel: [ 1.910173] hub 5-0:1.0: power on to >>> power good time: 20ms >>> Nov 8 23:05:54 knummi kernel: [ 1.910175] hub 5-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 1.910176] hub 5-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 1.910206] usb usb3: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 1.910210] usb usb3: udev 1, busnum >>> 3, minor = 256 >>> Nov 8 23:05:54 knummi kernel: [ 1.910211] usb usb3: New USB device >>> found, idVendor=1d6b, idProduct=0002 >>> Nov 8 23:05:54 knummi kernel: [ 1.910274] usb usb3: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 1.910351] usb usb3: Product: EHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.910410] usb usb3: Manufacturer: >>> Linux 3.1.0-tmo5 ehci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 1.910471] usb usb3: SerialNumber: >>> 0000:00:16.2 >>> Nov 8 23:05:54 knummi kernel: [ 1.910571] usb usb3: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 1.910573] usb usb3: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 1.910576] usb usb3: adding 3-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 1.910588] hub 3-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 1.910589] hub 3-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 1.910591] hub 3-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 1.910649] hub 3-0:1.0: 4 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 1.910707] hub 3-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 1.910708] hub 3-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 1.910709] hub 3-0:1.0: individual >>> port over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 1.910710] hub 3-0:1.0: power on to >>> power good time: 20ms >>> Nov 8 23:05:54 knummi kernel: [ 1.910712] hub 3-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 1.910714] hub 3-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 1.913035] ohci_hcd 0000:00:12.0: >>> PCI INT A -> GSI 18 (level, low) -> IRQ 18 >>> Nov 8 23:05:54 knummi kernel: [ 1.913110] ohci_hcd 0000:00:12.0: >>> OHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.913178] ohci_hcd 0000:00:12.0: >>> new USB bus registered, assigned bus number 6 >>> Nov 8 23:05:54 knummi kernel: [ 1.913264] QUIRK: Enable AMD PLL fix >>> Nov 8 23:05:54 knummi kernel: [ 1.913266] ohci_hcd 0000:00:12.0: >>> enabled AMD prefetch quirk >>> Nov 8 23:05:54 knummi kernel: [ 1.913277] ohci_hcd 0000:00:12.0: >>> created debug files >>> Nov 8 23:05:54 knummi kernel: [ 1.913278] ohci_hcd 0000:00:12.0: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.913287] ohci_hcd 0000:00:12.0: >>> irq 18, io mem 0xfe50a000 >>> Nov 8 23:05:54 knummi kernel: [ 1.968026] ohci_hcd 0000:00:12.0: >>> OHCI controller state >>> Nov 8 23:05:54 knummi kernel: [ 1.968028] ohci_hcd 0000:00:12.0: >>> OHCI 1.0, NO legacy support registers >>> Nov 8 23:05:54 knummi kernel: [ 1.968031] ohci_hcd 0000:00:12.0: >>> control 0x283 RWC HCFS=operational CBSR=3 >>> Nov 8 23:05:54 knummi kernel: [ 1.968034] ohci_hcd 0000:00:12.0: >>> cmdstatus 0x00000 SOC=0 >>> Nov 8 23:05:54 knummi kernel: [ 1.968037] ohci_hcd 0000:00:12.0: >>> intrstatus 0x00000004 SF >>> Nov 8 23:05:54 knummi kernel: [ 1.968040] ohci_hcd 0000:00:12.0: >>> intrenable 0x8000005a MIE RHSC UE RD WDH >>> Nov 8 23:05:54 knummi kernel: [ 1.968047] ohci_hcd 0000:00:12.0: >>> hcca frame #0005 >>> Nov 8 23:05:54 knummi kernel: [ 1.968050] ohci_hcd 0000:00:12.0: >>> roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) >>> Nov 8 23:05:54 knummi kernel: [ 1.968053] ohci_hcd 0000:00:12.0: >>> roothub.b 00000000 PPCM=0000 DR=0000 >>> Nov 8 23:05:54 knummi kernel: [ 1.968055] ohci_hcd 0000:00:12.0: >>> roothub.status 00008000 DRWE >>> Nov 8 23:05:54 knummi kernel: [ 1.968058] ohci_hcd 0000:00:12.0: >>> roothub.portstatus [0] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 1.968061] ohci_hcd 0000:00:12.0: >>> roothub.portstatus [1] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 1.968064] ohci_hcd 0000:00:12.0: >>> roothub.portstatus [2] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 1.968067] ohci_hcd 0000:00:12.0: >>> roothub.portstatus [3] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 1.968070] ohci_hcd 0000:00:12.0: >>> roothub.portstatus [4] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 1.968075] usb usb6: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 1.968078] usb usb6: udev 1, busnum >>> 6, minor = 640 >>> Nov 8 23:05:54 knummi kernel: [ 1.968080] usb usb6: New USB device >>> found, idVendor=1d6b, idProduct=0001 >>> Nov 8 23:05:54 knummi kernel: [ 1.968143] usb usb6: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 1.968220] usb usb6: Product: OHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.968279] usb usb6: Manufacturer: >>> Linux 3.1.0-tmo5 ohci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 1.968339] usb usb6: SerialNumber: >>> 0000:00:12.0 >>> Nov 8 23:05:54 knummi kernel: [ 1.968451] usb usb6: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 1.968452] usb usb6: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 1.968456] usb usb6: adding 6-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 1.968468] hub 6-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 1.968469] hub 6-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 1.968470] hub 6-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 1.968530] hub 6-0:1.0: 5 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 1.968588] hub 6-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 1.968589] hub 6-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 1.968590] hub 6-0:1.0: no >>> over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 1.968591] hub 6-0:1.0: power on to >>> power good time: 4ms >>> Nov 8 23:05:54 knummi kernel: [ 1.968595] hub 6-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 1.968596] hub 6-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 1.968623] ehci_hcd 0000:00:12.2: >>> HS companion for 0000:00:12.0 >>> Nov 8 23:05:54 knummi kernel: [ 1.972023] ohci_hcd 0000:00:13.0: >>> PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>> Nov 8 23:05:54 knummi kernel: [ 1.972092] ohci_hcd 0000:00:13.0: >>> OHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 1.972154] ohci_hcd 0000:00:13.0: >>> new USB bus registered, assigned bus number 7 >>> Nov 8 23:05:54 knummi kernel: [ 1.972234] ohci_hcd 0000:00:13.0: >>> enabled AMD prefetch quirk >>> Nov 8 23:05:54 knummi kernel: [ 1.972243] ohci_hcd 0000:00:13.0: >>> created debug files >>> Nov 8 23:05:54 knummi kernel: [ 1.972244] ohci_hcd 0000:00:13.0: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 1.972252] ohci_hcd 0000:00:13.0: >>> irq 20, io mem 0xfe508000 >>> Nov 8 23:05:54 knummi kernel: [ 2.010118] hub 1-0:1.0: state 7 >>> ports 5 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.010122] hub 4-0:1.0: port 1: >>> status 0101 change 0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.010124] hub 2-0:1.0: state 7 >>> ports 5 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.010130] hub 4-0:1.0: port 2: >>> status 0101 change 0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.010180] hub 5-0:1.0: state 7 >>> ports 2 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.010182] hub 3-0:1.0: state 7 >>> ports 4 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.015241] md: bind<sdc2> >>> Nov 8 23:05:54 knummi kernel: [ 2.016921] md: bind<sdc3> >>> Nov 8 23:05:54 knummi kernel: [ 2.018425] md: bind<sdc1> >>> Nov 8 23:05:54 knummi kernel: [ 2.027022] ohci_hcd 0000:00:13.0: >>> OHCI controller state >>> Nov 8 23:05:54 knummi kernel: [ 2.027025] ohci_hcd 0000:00:13.0: >>> OHCI 1.0, NO legacy support registers >>> Nov 8 23:05:54 knummi kernel: [ 2.027028] ohci_hcd 0000:00:13.0: >>> control 0x283 RWC HCFS=operational CBSR=3 >>> Nov 8 23:05:54 knummi kernel: [ 2.027031] ohci_hcd 0000:00:13.0: >>> cmdstatus 0x00000 SOC=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.027033] ohci_hcd 0000:00:13.0: >>> intrstatus 0x00000004 SF >>> Nov 8 23:05:54 knummi kernel: [ 2.027036] ohci_hcd 0000:00:13.0: >>> intrenable 0x8000005a MIE RHSC UE RD WDH >>> Nov 8 23:05:54 knummi kernel: [ 2.027043] ohci_hcd 0000:00:13.0: >>> hcca frame #0005 >>> Nov 8 23:05:54 knummi kernel: [ 2.027046] ohci_hcd 0000:00:13.0: >>> roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) >>> Nov 8 23:05:54 knummi kernel: [ 2.027049] ohci_hcd 0000:00:13.0: >>> roothub.b 00000000 PPCM=0000 DR=0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.027051] ohci_hcd 0000:00:13.0: >>> roothub.status 00008000 DRWE >>> Nov 8 23:05:54 knummi kernel: [ 2.027054] ohci_hcd 0000:00:13.0: >>> roothub.portstatus [0] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.027057] ohci_hcd 0000:00:13.0: >>> roothub.portstatus [1] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.027060] ohci_hcd 0000:00:13.0: >>> roothub.portstatus [2] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.027063] ohci_hcd 0000:00:13.0: >>> roothub.portstatus [3] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.027065] ohci_hcd 0000:00:13.0: >>> roothub.portstatus [4] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.027073] usb usb7: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 2.027076] usb usb7: udev 1, busnum >>> 7, minor = 768 >>> Nov 8 23:05:54 knummi kernel: [ 2.027077] usb usb7: New USB device >>> found, idVendor=1d6b, idProduct=0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.027141] usb usb7: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 2.027219] usb usb7: Product: OHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 2.027278] usb usb7: Manufacturer: >>> Linux 3.1.0-tmo5 ohci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.027336] md: bind<sdb3> >>> Nov 8 23:05:54 knummi kernel: [ 2.027396] usb usb7: SerialNumber: >>> 0000:00:13.0 >>> Nov 8 23:05:54 knummi kernel: [ 2.027506] usb usb7: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.027508] usb usb7: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.027511] usb usb7: adding 7-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.027522] hub 7-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.027523] hub 7-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.027524] hub 7-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 2.027590] hub 7-0:1.0: 5 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 2.027651] hub 7-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 2.027652] hub 7-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 2.027653] hub 7-0:1.0: no >>> over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 2.027654] hub 7-0:1.0: power on to >>> power good time: 4ms >>> Nov 8 23:05:54 knummi kernel: [ 2.027658] hub 7-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 2.027659] hub 7-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 2.027688] ehci_hcd 0000:00:13.2: >>> HS companion for 0000:00:13.0 >>> Nov 8 23:05:54 knummi kernel: [ 2.028417] ohci_hcd 0000:00:14.5: >>> PCI INT C -> GSI 18 (level, low) -> IRQ 18 >>> Nov 8 23:05:54 knummi kernel: [ 2.028488] ohci_hcd 0000:00:14.5: >>> OHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 2.028552] ohci_hcd 0000:00:14.5: >>> new USB bus registered, assigned bus number 8 >>> Nov 8 23:05:54 knummi kernel: [ 2.028578] bio: create slab >>> <bio-1> at 1 >>> Nov 8 23:05:54 knummi kernel: [ 2.028617] md/raid1:md2: active >>> with 2 out of 2 mirrors >>> Nov 8 23:05:54 knummi kernel: [ 2.028632] md2: detected capacity >>> change from 0 to 8184070144 >>> Nov 8 23:05:54 knummi kernel: [ 2.028808] ohci_hcd 0000:00:14.5: >>> enabled AMD prefetch quirk >>> Nov 8 23:05:54 knummi kernel: [ 2.028822] ohci_hcd 0000:00:14.5: >>> created debug files >>> Nov 8 23:05:54 knummi kernel: [ 2.028823] ohci_hcd 0000:00:14.5: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 2.028826] ohci_hcd 0000:00:14.5: >>> irq 18, io mem 0xfe506000 >>> Nov 8 23:05:54 knummi kernel: [ 2.029936] md: bind<sdb1> >>> Nov 8 23:05:54 knummi kernel: [ 2.031098] md/raid1:md0: active >>> with 2 out of 2 mirrors >>> Nov 8 23:05:54 knummi kernel: [ 2.031210] md0: detected capacity >>> change from 0 to 2006843392 >>> Nov 8 23:05:54 knummi kernel: [ 2.031766] md2: unknown partition >>> table >>> Nov 8 23:05:54 knummi kernel: [ 2.033700] md0: unknown partition >>> table >>> Nov 8 23:05:54 knummi kernel: [ 2.068024] hub 6-0:1.0: state 7 >>> ports 5 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.083023] ohci_hcd 0000:00:14.5: >>> OHCI controller state >>> Nov 8 23:05:54 knummi kernel: [ 2.083025] ohci_hcd 0000:00:14.5: >>> OHCI 1.0, NO legacy support registers >>> Nov 8 23:05:54 knummi kernel: [ 2.083028] ohci_hcd 0000:00:14.5: >>> control 0x283 RWC HCFS=operational CBSR=3 >>> Nov 8 23:05:54 knummi kernel: [ 2.083030] ohci_hcd 0000:00:14.5: >>> cmdstatus 0x00000 SOC=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.083033] ohci_hcd 0000:00:14.5: >>> intrstatus 0x00000004 SF >>> Nov 8 23:05:54 knummi kernel: [ 2.083036] ohci_hcd 0000:00:14.5: >>> intrenable 0x8000005a MIE RHSC UE RD WDH >>> Nov 8 23:05:54 knummi kernel: [ 2.083043] ohci_hcd 0000:00:14.5: >>> hcca frame #0005 >>> Nov 8 23:05:54 knummi kernel: [ 2.083046] ohci_hcd 0000:00:14.5: >>> roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) >>> Nov 8 23:05:54 knummi kernel: [ 2.083049] ohci_hcd 0000:00:14.5: >>> roothub.b 00000000 PPCM=0000 DR=0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.083051] ohci_hcd 0000:00:14.5: >>> roothub.status 00008000 DRWE >>> Nov 8 23:05:54 knummi kernel: [ 2.083054] ohci_hcd 0000:00:14.5: >>> roothub.portstatus [0] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.083057] ohci_hcd 0000:00:14.5: >>> roothub.portstatus [1] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.083061] usb usb8: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 2.083065] usb usb8: udev 1, busnum >>> 8, minor = 896 >>> Nov 8 23:05:54 knummi kernel: [ 2.083066] usb usb8: New USB device >>> found, idVendor=1d6b, idProduct=0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.083129] usb usb8: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 2.083206] usb usb8: Product: OHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 2.083265] usb usb8: Manufacturer: >>> Linux 3.1.0-tmo5 ohci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.083326] usb usb8: SerialNumber: >>> 0000:00:14.5 >>> Nov 8 23:05:54 knummi kernel: [ 2.083495] usb usb8: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.083496] usb usb8: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.083499] usb usb8: adding 8-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.083510] hub 8-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.083511] hub 8-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.083512] hub 8-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 2.083572] hub 8-0:1.0: 2 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 2.083630] hub 8-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 2.083631] hub 8-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 2.083632] hub 8-0:1.0: no >>> over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 2.083633] hub 8-0:1.0: power on to >>> power good time: 4ms >>> Nov 8 23:05:54 knummi kernel: [ 2.083636] hub 8-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 2.083637] hub 8-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 2.086023] ohci_hcd 0000:00:16.0: >>> PCI INT A -> GSI 22 (level, low) -> IRQ 22 >>> Nov 8 23:05:54 knummi kernel: [ 2.086093] ohci_hcd 0000:00:16.0: >>> OHCI Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 2.086155] ohci_hcd 0000:00:16.0: >>> new USB bus registered, assigned bus number 9 >>> Nov 8 23:05:54 knummi kernel: [ 2.086235] ohci_hcd 0000:00:16.0: >>> enabled AMD prefetch quirk >>> Nov 8 23:05:54 knummi kernel: [ 2.086245] ohci_hcd 0000:00:16.0: >>> created debug files >>> Nov 8 23:05:54 knummi kernel: [ 2.086246] ohci_hcd 0000:00:16.0: >>> supports USB remote wakeup >>> Nov 8 23:05:54 knummi kernel: [ 2.086254] ohci_hcd 0000:00:16.0: >>> irq 22, io mem 0xfe505000 >>> Nov 8 23:05:54 knummi kernel: [ 2.110028] hub 4-0:1.0: state 7 >>> ports 2 chg 0006 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.110037] hub 4-0:1.0: port 1, >>> status 0101, change 0000, 12 Mb/s >>> Nov 8 23:05:54 knummi kernel: [ 2.141045] ohci_hcd 0000:00:16.0: >>> OHCI controller state >>> Nov 8 23:05:54 knummi kernel: [ 2.141047] ohci_hcd 0000:00:16.0: >>> OHCI 1.0, NO legacy support registers >>> Nov 8 23:05:54 knummi kernel: [ 2.141050] ohci_hcd 0000:00:16.0: >>> control 0x283 RWC HCFS=operational CBSR=3 >>> Nov 8 23:05:54 knummi kernel: [ 2.141053] ohci_hcd 0000:00:16.0: >>> cmdstatus 0x00000 SOC=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.141055] ohci_hcd 0000:00:16.0: >>> intrstatus 0x00000004 SF >>> Nov 8 23:05:54 knummi kernel: [ 2.141058] ohci_hcd 0000:00:16.0: >>> intrenable 0x8000005a MIE RHSC UE RD WDH >>> Nov 8 23:05:54 knummi kernel: [ 2.141066] ohci_hcd 0000:00:16.0: >>> hcca frame #0005 >>> Nov 8 23:05:54 knummi kernel: [ 2.141069] ohci_hcd 0000:00:16.0: >>> roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4) >>> Nov 8 23:05:54 knummi kernel: [ 2.141071] ohci_hcd 0000:00:16.0: >>> roothub.b 00000000 PPCM=0000 DR=0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.141074] ohci_hcd 0000:00:16.0: >>> roothub.status 00008000 DRWE >>> Nov 8 23:05:54 knummi kernel: [ 2.141077] ohci_hcd 0000:00:16.0: >>> roothub.portstatus [0] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.141080] ohci_hcd 0000:00:16.0: >>> roothub.portstatus [1] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.141082] ohci_hcd 0000:00:16.0: >>> roothub.portstatus [2] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.141085] ohci_hcd 0000:00:16.0: >>> roothub.portstatus [3] 0x00000100 PPS >>> Nov 8 23:05:54 knummi kernel: [ 2.141090] usb usb9: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 2.141093] usb usb9: udev 1, busnum >>> 9, minor = 1024 >>> Nov 8 23:05:54 knummi kernel: [ 2.141095] usb usb9: New USB device >>> found, idVendor=1d6b, idProduct=0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.141158] usb usb9: New USB device >>> strings: Mfr=3, Product=2, SerialNumber=1 >>> Nov 8 23:05:54 knummi kernel: [ 2.141235] usb usb9: Product: OHCI >>> Host Controller >>> Nov 8 23:05:54 knummi kernel: [ 2.141294] usb usb9: Manufacturer: >>> Linux 3.1.0-tmo5 ohci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.141355] usb usb9: SerialNumber: >>> 0000:00:16.0 >>> Nov 8 23:05:54 knummi kernel: [ 2.141464] usb usb9: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.141466] usb usb9: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.141469] usb usb9: adding 9-0:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.141479] hub 9-0:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.141481] hub 9-0:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.141482] hub 9-0:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 2.141542] hub 9-0:1.0: 4 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 2.141599] hub 9-0:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 2.141600] hub 9-0:1.0: no power >>> switching (usb 1.0) >>> Nov 8 23:05:54 knummi kernel: [ 2.141602] hub 9-0:1.0: no >>> over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 2.141603] hub 9-0:1.0: power on to >>> power good time: 4ms >>> Nov 8 23:05:54 knummi kernel: [ 2.141606] hub 9-0:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 2.141607] hub 9-0:1.0: trying to >>> enable port power on non-switchable hub >>> Nov 8 23:05:54 knummi kernel: [ 2.141639] ehci_hcd 0000:00:16.2: >>> HS companion for 0000:00:16.0 >>> Nov 8 23:05:54 knummi kernel: [ 2.143049] [drm] nouveau >>> 0000:01:00.0: 3 available performance level(s) >>> Nov 8 23:05:54 knummi kernel: [ 2.143113] [drm] nouveau >>> 0000:01:00.0: 0: memory 135MHz core 50MHz shader 101MHz voltage 880mV >>> timing 0 >>> Nov 8 23:05:54 knummi kernel: [ 2.143195] [drm] nouveau >>> 0000:01:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 900mV >>> timing 1 >>> Nov 8 23:05:54 knummi kernel: [ 2.143277] [drm] nouveau >>> 0000:01:00.0: 3: memory 800MHz core 700MHz shader 1400MHz voltage >>> 990mV timing 2 >>> Nov 8 23:05:54 knummi kernel: [ 2.144736] [TTM] Zone kernel: >>> Available graphics memory: 4103680 kiB. >>> Nov 8 23:05:54 knummi kernel: [ 2.144799] [TTM] Zone dma32: >>> Available graphics memory: 2097152 kiB. >>> Nov 8 23:05:54 knummi kernel: [ 2.144861] [TTM] Initializing pool >>> allocator. >>> Nov 8 23:05:54 knummi kernel: [ 2.144925] [drm] nouveau >>> 0000:01:00.0: Detected 512MiB VRAM >>> Nov 8 23:05:54 knummi kernel: [ 2.148292] [drm] nouveau >>> 0000:01:00.0: 512 MiB GART (aperture) >>> Nov 8 23:05:54 knummi kernel: [ 2.151292] [drm] Supports vblank >>> timestamp caching Rev 1 (10.10.2010). >>> Nov 8 23:05:54 knummi kernel: [ 2.151382] [drm] No driver support >>> for vblank timestamp query. >>> Nov 8 23:05:54 knummi kernel: [ 2.161033] hub 4-0:1.0: port 1 not >>> reset yet, waiting 50ms >>> Nov 8 23:05:54 knummi kernel: [ 2.263034] usb 4-1: new low speed >>> USB device number 2 using xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.280034] usb 4-1: skipped 1 >>> descriptor after interface >>> Nov 8 23:05:54 knummi kernel: [ 2.280349] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.280447] usb 4-1: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 2.281754] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.282572] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.282677] usb 4-1: udev 2, busnum >>> 4, minor = 385 >>> Nov 8 23:05:54 knummi kernel: [ 2.282679] usb 4-1: New USB device >>> found, idVendor=046d, idProduct=c01b >>> Nov 8 23:05:54 knummi kernel: [ 2.282771] usb 4-1: New USB device >>> strings: Mfr=1, Product=2, SerialNumber=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.282867] usb 4-1: Product: >>> USB-PS/2 Optical Mouse >>> Nov 8 23:05:54 knummi kernel: [ 2.282960] usb 4-1: Manufacturer: >>> Logitech >>> Nov 8 23:05:54 knummi kernel: [ 2.283116] usb 4-1: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.283119] usb 4-1: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.283125] usb 4-1: ep 0x81 - >>> rounding interval to 64 microframes, ep desc says 80 microframes >>> Nov 8 23:05:54 knummi kernel: [ 2.284083] usb 4-1: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 2.284389] usb 4-1: adding 4-1:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.284429] hub 4-0:1.0: port 2, >>> status 0101, change 0000, 12 Mb/s >>> Nov 8 23:05:54 knummi kernel: [ 2.286078] usbhid 4-1:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.286080] usbhid 4-1:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.288059] md: bind<sdb2> >>> Nov 8 23:05:54 knummi kernel: [ 2.289070] input: Logitech USB-PS/2 >>> Optical Mouse as >>> /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-1/4-1:1.0/input/input3 >>> >>> Nov 8 23:05:54 knummi kernel: [ 2.289259] generic-usb >>> 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech >>> USB-PS/2 Optical Mouse] on usb-0000:04:00.0-1/input0 >>> Nov 8 23:05:54 knummi kernel: [ 2.289393] usbcore: registered new >>> interface driver usbhid >>> Nov 8 23:05:54 knummi kernel: [ 2.289486] usbhid: USB HID core >>> driver >>> Nov 8 23:05:54 knummi kernel: [ 2.335025] hub 4-0:1.0: port 2 not >>> reset yet, waiting 50ms >>> Nov 8 23:05:54 knummi kernel: [ 2.341703] [drm] nouveau >>> 0000:01:00.0: allocated 1920x1200 fb: 0x1a0000, bo ffff88021edc9800 >>> Nov 8 23:05:54 knummi kernel: [ 2.341852] fbcon: nouveaufb (fb0) >>> is primary device >>> Nov 8 23:05:54 knummi kernel: [ 2.382433] Console: switching to >>> colour frame buffer device 240x75 >>> Nov 8 23:05:54 knummi kernel: [ 2.382513] md/raid1:md1: active >>> with 2 out of 2 mirrors >>> Nov 8 23:05:54 knummi kernel: [ 2.382530] md1: detected capacity >>> change from 0 to 990011064320 >>> Nov 8 23:05:54 knummi kernel: [ 2.385164] md1: unknown partition >>> table >>> Nov 8 23:05:54 knummi kernel: [ 2.385325] fb0: nouveaufb frame >>> buffer device >>> Nov 8 23:05:54 knummi kernel: [ 2.385336] drm: registered panic >>> notifier >>> Nov 8 23:05:54 knummi kernel: [ 2.385349] [drm] Initialized >>> nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 >>> Nov 8 23:05:54 knummi kernel: [ 2.438061] usb 4-2: new high speed >>> USB device number 3 using xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.452158] usb 4-2: udev 3, busnum >>> 4, minor = 386 >>> Nov 8 23:05:54 knummi kernel: [ 2.452160] usb 4-2: New USB device >>> found, idVendor=04b4, idProduct=6560 >>> Nov 8 23:05:54 knummi kernel: [ 2.452169] usb 4-2: New USB device >>> strings: Mfr=0, Product=0, SerialNumber=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.452221] usb 4-2: usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.452223] usb 4-2: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.453077] usb 4-2: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 2.453124] usb 4-2: adding 4-2:1.0 >>> (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.453143] hub 4-2:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.453145] hub 4-2:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.453146] hub 4-2:1.0: USB hub found >>> Nov 8 23:05:54 knummi kernel: [ 2.453165] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.453196] hub 4-2:1.0: 4 ports >>> detected >>> Nov 8 23:05:54 knummi kernel: [ 2.453200] hub 4-2:1.0: standalone >>> hub >>> Nov 8 23:05:54 knummi kernel: [ 2.453202] hub 4-2:1.0: individual >>> port power switching >>> Nov 8 23:05:54 knummi kernel: [ 2.453203] hub 4-2:1.0: individual >>> port over-current protection >>> Nov 8 23:05:54 knummi kernel: [ 2.454306] usb 4-2: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 2.454357] hub 4-2:1.0: TT per port >>> Nov 8 23:05:54 knummi kernel: [ 2.454359] hub 4-2:1.0: TT requires >>> at most 8 FS bit times (666 ns) >>> Nov 8 23:05:54 knummi kernel: [ 2.454360] hub 4-2:1.0: Port >>> indicators are supported >>> Nov 8 23:05:54 knummi kernel: [ 2.454362] hub 4-2:1.0: power on to >>> power good time: 100ms >>> Nov 8 23:05:54 knummi kernel: [ 2.454712] usb 4-2: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 2.454752] hub 4-2:1.0: local power >>> source is good >>> Nov 8 23:05:54 knummi kernel: [ 2.454754] hub 4-2:1.0: enabling >>> power on all ports >>> Nov 8 23:05:54 knummi kernel: [ 2.454926] hub 7-0:1.0: state 7 >>> ports 5 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.454928] hub 8-0:1.0: state 7 >>> ports 2 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.454930] hub 9-0:1.0: state 7 >>> ports 4 chg 0000 evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.554054] hub 4-2:1.0: port 1: >>> status 0301 change 0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.554168] hub 4-2:1.0: port 3: >>> status 0101 change 0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.554248] hub 4-2:1.0: port 4: >>> status 0101 change 0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.563566] md: linear personality >>> registered for level -1 >>> Nov 8 23:05:54 knummi kernel: [ 2.564576] md: multipath >>> personality registered for level -4 >>> Nov 8 23:05:54 knummi kernel: [ 2.565611] md: raid0 personality >>> registered for level 0 >>> Nov 8 23:05:54 knummi kernel: [ 2.567535] async_tx: api >>> initialized (async) >>> Nov 8 23:05:54 knummi kernel: [ 2.584042] raid6: int64x1 2906 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.601037] raid6: int64x2 4109 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.618040] raid6: int64x4 2984 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.635043] raid6: int64x8 2679 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.652038] raid6: sse2x1 4714 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.655043] hub 4-2:1.0: state 7 >>> ports 4 chg 001a evt 0000 >>> Nov 8 23:05:54 knummi kernel: [ 2.655079] hub 4-2:1.0: port 1, >>> status 0301, change 0000, 1.5 Mb/s >>> Nov 8 23:05:54 knummi kernel: [ 2.669026] raid6: sse2x2 7789 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.686025] raid6: sse2x4 9007 MB/s >>> Nov 8 23:05:54 knummi kernel: [ 2.686028] raid6: using algorithm >>> sse2x4 (9007 MB/s) >>> Nov 8 23:05:54 knummi kernel: [ 2.686214] xor: automatically using >>> best checksumming function: generic_sse >>> Nov 8 23:05:54 knummi kernel: [ 2.691024] generic_sse: >>> 13932.000 MB/sec >>> Nov 8 23:05:54 knummi kernel: [ 2.691028] xor: using function: >>> generic_sse (13932.000 MB/sec) >>> Nov 8 23:05:54 knummi kernel: [ 2.691432] md: raid6 personality >>> registered for level 6 >>> Nov 8 23:05:54 knummi kernel: [ 2.691437] md: raid5 personality >>> registered for level 5 >>> Nov 8 23:05:54 knummi kernel: [ 2.691441] md: raid4 personality >>> registered for level 4 >>> Nov 8 23:05:54 knummi kernel: [ 2.694513] md: raid10 personality >>> registered for level 10 >>> Nov 8 23:05:54 knummi kernel: [ 2.718088] usb 4-2.1: new low speed >>> USB device number 4 using xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.739791] usb 4-2.1: skipped 1 >>> descriptor after interface >>> Nov 8 23:05:54 knummi kernel: [ 2.739794] usb 4-2.1: skipped 1 >>> descriptor after interface >>> Nov 8 23:05:54 knummi kernel: [ 2.740048] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.740141] usb 4-2.1: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 2.742099] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.742762] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.742824] usb 4-2.1: udev 4, >>> busnum 4, minor = 387 >>> Nov 8 23:05:54 knummi kernel: [ 2.742825] usb 4-2.1: New USB >>> device found, idVendor=0111, idProduct=0111 >>> Nov 8 23:05:54 knummi kernel: [ 2.742831] usb 4-2.1: New USB >>> device strings: Mfr=1, Product=2, SerialNumber=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.742836] usb 4-2.1: Product: >>> PS/2-Cable To USB Converter V:2.2 >>> Nov 8 23:05:54 knummi kernel: [ 2.742840] usb 4-2.1: >>> Manufacturer: 607 >>> Nov 8 23:05:54 knummi kernel: [ 2.742922] usb 4-2.1: >>> usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.742924] usb 4-2.1: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.742930] usb 4-2.1: ep 0x81 - >>> rounding interval to 64 microframes, ep desc says 80 microframes >>> Nov 8 23:05:54 knummi kernel: [ 2.742939] usb 4-2.1: ep 0x82 - >>> rounding interval to 64 microframes, ep desc says 80 microframes >>> Nov 8 23:05:54 knummi kernel: [ 2.744145] usb 4-2.1: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 2.744360] usb 4-2.1: adding >>> 4-2.1:1.0 (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.745332] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 2.745438] usbhid 4-2.1:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.745439] usbhid 4-2.1:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.748013] input: 607 PS/2-Cable To >>> USB Converter V:2.2 as >>> /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-2/4-2.1/4-2.1:1.0/input/input4 >>> >>> Nov 8 23:05:54 knummi kernel: [ 2.748085] generic-usb >>> 0003:0111:0111.0002: input,hidraw1: USB HID v1.00 Keyboard [607 >>> PS/2-Cable To USB Converter V:2.2] on usb-0000:04:00.0-2.1/input0 >>> Nov 8 23:05:54 knummi kernel: [ 2.748103] usb 4-2.1: adding >>> 4-2.1:1.1 (config #1, interface 1) >>> Nov 8 23:05:54 knummi kernel: [ 2.748118] usbhid 4-2.1:1.1: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 2.748119] usbhid 4-2.1:1.1: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 2.750943] input: 607 PS/2-Cable To >>> USB Converter V:2.2 as >>> /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-2/4-2.1/4-2.1:1.1/input/input5 >>> >>> Nov 8 23:05:54 knummi kernel: [ 2.751028] generic-usb >>> 0003:0111:0111.0003: input,hidraw2: USB HID v1.10 Joystick [607 >>> PS/2-Cable To USB Converter V:2.2] on usb-0000:04:00.0-2.1/input1 >>> Nov 8 23:05:54 knummi kernel: [ 2.751079] hub 4-2:1.0: port 3, >>> status 0101, change 0000, 12 Mb/s >>> Nov 8 23:05:54 knummi kernel: [ 2.813073] usb 4-2.3: new full >>> speed USB device number 5 using xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 2.874025] usb 4-2.3: skipped 1 >>> descriptor after interface >>> Nov 8 23:05:54 knummi kernel: [ 2.874027] usb 4-2.3: udev 5, >>> busnum 4, minor = 388 >>> Nov 8 23:05:54 knummi kernel: [ 2.874029] usb 4-2.3: New USB >>> device found, idVendor=0a12, idProduct=0001 >>> Nov 8 23:05:54 knummi kernel: [ 2.874035] usb 4-2.3: New USB >>> device strings: Mfr=0, Product=0, SerialNumber=0 >>> Nov 8 23:05:54 knummi kernel: [ 2.874099] usb 4-2.3: >>> usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 2.874101] usb 4-2.3: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 2.876061] usb 4-2.3: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 2.877319] usb 4-2.3: adding >>> 4-2.3:1.0 (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 2.877357] usb 4-2.3: adding >>> 4-2.3:1.1 (config #1, interface 1) >>> Nov 8 23:05:54 knummi kernel: [ 2.877377] usb 4-2.3: adding >>> 4-2.3:1.2 (config #1, interface 2) >>> Nov 8 23:05:54 knummi kernel: [ 2.877416] hub 4-2:1.0: port 4, >>> status 0101, change 0000, 12 Mb/s >>> Nov 8 23:05:54 knummi kernel: [ 2.939074] usb 4-2.4: new high >>> speed USB device number 6 using xhci_hcd >>> Nov 8 23:05:54 knummi kernel: [ 3.167171] usb 4-2.4: skipped 1 >>> descriptor after configuration >>> Nov 8 23:05:54 knummi kernel: [ 3.167173] usb 4-2.4: skipped 8 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167175] usb 4-2.4: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 3.167177] usb 4-2.4: skipped 43 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167181] usb 4-2.4: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 3.167183] usb 4-2.4: skipped 4 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167184] usb 4-2.4: skipped 2 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167185] usb 4-2.4: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 3.167187] usb 4-2.4: skipped 2 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167188] usb 4-2.4: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 3.167189] usb 4-2.4: skipped 2 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167191] usb 4-2.4: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 3.167192] usb 4-2.4: skipped 2 >>> descriptors after interface >>> Nov 8 23:05:54 knummi kernel: [ 3.167193] usb 4-2.4: skipped 1 >>> descriptor after endpoint >>> Nov 8 23:05:54 knummi kernel: [ 3.168313] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 3.168942] usb 4-2.4: default >>> language 0x0409 >>> Nov 8 23:05:54 knummi kernel: [ 3.171119] xhci_hcd 0000:04:00.0: >>> WARN: short transfer on control ep >>> Nov 8 23:05:54 knummi kernel: [ 3.171709] usb 4-2.4: udev 6, >>> busnum 4, minor = 389 >>> Nov 8 23:05:54 knummi kernel: [ 3.171711] usb 4-2.4: New USB >>> device found, idVendor=046d, idProduct=0825 >>> Nov 8 23:05:54 knummi kernel: [ 3.171718] usb 4-2.4: New USB >>> device strings: Mfr=0, Product=0, SerialNumber=2 >>> Nov 8 23:05:54 knummi kernel: [ 3.171722] usb 4-2.4: SerialNumber: >>> C6CC2D90 >>> Nov 8 23:05:54 knummi kernel: [ 3.171786] usb 4-2.4: >>> usb_probe_device >>> Nov 8 23:05:54 knummi kernel: [ 3.171787] usb 4-2.4: configuration >>> #1 chosen from 1 choice >>> Nov 8 23:05:54 knummi kernel: [ 3.172746] usb 4-2.4: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 3.172788] usb 4-2.4: adding >>> 4-2.4:1.0 (config #1, interface 0) >>> Nov 8 23:05:54 knummi kernel: [ 3.172816] usb 4-2.4: adding >>> 4-2.4:1.1 (config #1, interface 1) >>> Nov 8 23:05:54 knummi kernel: [ 3.172829] usb 4-2.4: adding >>> 4-2.4:1.2 (config #1, interface 2) >>> Nov 8 23:05:54 knummi kernel: [ 3.172842] usb 4-2.4: adding >>> 4-2.4:1.3 (config #1, interface 3) >>> Nov 8 23:05:54 knummi kernel: [ 3.172866] hub 4-2:1.0: state 7 >>> ports 4 chg 0000 evt 0010 >>> Nov 8 23:05:54 knummi kernel: [ 3.204063] ohci_hcd 0000:00:12.0: >>> auto-stop root hub >>> Nov 8 23:05:54 knummi kernel: [ 3.204078] ohci_hcd 0000:00:13.0: >>> auto-stop root hub >>> Nov 8 23:05:54 knummi kernel: [ 3.204087] ohci_hcd 0000:00:14.5: >>> auto-stop root hub >>> Nov 8 23:05:54 knummi kernel: [ 3.204099] ohci_hcd 0000:00:16.0: >>> auto-stop root hub >>> Nov 8 23:05:54 knummi kernel: [ 7.773853] EXT4-fs (md1): mounted >>> filesystem with ordered data mode. Opts: (null) >>> Nov 8 23:05:54 knummi kernel: [ 9.962309] udev[474]: starting >>> version 163 >>> Nov 8 23:05:54 knummi kernel: [ 11.085439] Bluetooth: Core ver 2.16 >>> Nov 8 23:05:54 knummi kernel: [ 11.085456] NET: Registered protocol >>> family 31 >>> Nov 8 23:05:54 knummi kernel: [ 11.085457] Bluetooth: HCI device >>> and connection manager initialized >>> Nov 8 23:05:54 knummi kernel: [ 11.085459] Bluetooth: HCI socket >>> layer initialized >>> Nov 8 23:05:54 knummi kernel: [ 11.085460] Bluetooth: L2CAP socket >>> layer initialized >>> Nov 8 23:05:54 knummi kernel: [ 11.085464] Bluetooth: SCO socket >>> layer initialized >>> Nov 8 23:05:54 knummi kernel: [ 11.091855] MCE: In-kernel MCE >>> decoding enabled. >>> Nov 8 23:05:54 knummi kernel: [ 11.095935] Bluetooth: Generic >>> Bluetooth USB driver ver 0.6 >>> Nov 8 23:05:54 knummi kernel: [ 11.095949] btusb 4-2.3:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 11.095951] btusb 4-2.3:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 11.170439] piix4_smbus >>> 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 >>> Nov 8 23:05:54 knummi kernel: [ 11.183447] EDAC MC: Ver: 2.1.0 >>> Nov 8 23:05:54 knummi kernel: [ 11.305541] Linux media interface: >>> v0.10 >>> Nov 8 23:05:54 knummi kernel: [ 11.393060] AMD64 EDAC driver v3.4.0 >>> Nov 8 23:05:54 knummi kernel: [ 11.393178] EDAC amd64: DRAM ECC >>> disabled. >>> Nov 8 23:05:54 knummi kernel: [ 11.393184] EDAC amd64: ECC disabled >>> in the BIOS or no ECC capability, module will not load. >>> Nov 8 23:05:54 knummi kernel: [ 11.393185] Either enable ECC >>> checking or force module loading by setting 'ecc_enable_override'. >>> Nov 8 23:05:54 knummi kernel: [ 11.393186] (Note that use of the >>> override may cause unknown side effects.) >>> Nov 8 23:05:54 knummi kernel: [ 11.406270] EXT4-fs (md1): >>> re-mounted. Opts: user_xattr,errors=remount-ro >>> Nov 8 23:05:54 knummi kernel: [ 11.507951] Intel AES-NI >>> instructions are not detected. >>> Nov 8 23:05:54 knummi kernel: [ 11.518111] btusb 4-2.3:1.2: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 11.518114] btusb 4-2.3:1.2: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 11.518130] usbcore: registered new >>> interface driver btusb >>> Nov 8 23:05:54 knummi kernel: [ 11.553026] Linux video capture >>> interface: v2.00 >>> Nov 8 23:05:54 knummi kernel: [ 11.556489] uvcvideo 4-2.4:1.0: >>> usb_probe_interface >>> Nov 8 23:05:54 knummi kernel: [ 11.556492] uvcvideo 4-2.4:1.0: >>> usb_probe_interface - got id >>> Nov 8 23:05:54 knummi kernel: [ 11.556508] uvcvideo: Found UVC 1.00 >>> device <unnamed> (046d:0825) >>> Nov 8 23:05:54 knummi kernel: [ 11.556899] usb 4-2.4: Successful >>> Endpoint Configure command >>> Nov 8 23:05:54 knummi kernel: [ 11.565397] EXT4-fs (sda1): mounted >>> filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro >>> Nov 8 23:05:54 knummi kernel: [ 11.705757] saa7146: register >>> extension 'budget_av'. >>> Nov 8 23:05:54 knummi kernel: [ 11.705823] budget_av 0000:06:05.0: >>> PCI INT A -> GSI 20 (level, low) -> IRQ 20 >>> Nov 8 23:05:54 knummi kernel: [ 11.705869] saa7146: found saa7146 @ >>> mem ffffc900117ae000 (revision 1, irq 20) (0x153b,0x1157). >>> Nov 8 23:05:54 knummi kernel: [ 11.705873] saa7146 (0): dma buffer >>> size 192512 >>> Nov 8 23:05:54 knummi kernel: [ 11.705875] DVB: registering new >>> adapter (Terratec Cinergy 1200 DVB-T) >>> Nov 8 23:05:54 knummi kernel: [ 11.723928] adapter failed MAC >>> signature check >>> Nov 8 23:05:54 knummi kernel: [ 11.723930] encoded MAC from EEPROM >>> was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff >>> Nov 8 23:05:54 knummi kernel: [ 11.791031] snd_hda_intel >>> 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 >>> Nov 8 23:05:54 knummi kernel: [ 11.820062] hda_codec: ALC892: BIOS >>> auto-probing. >>> Nov 8 23:05:54 knummi kernel: [ 11.827179] input: HDA ATI SB >>> Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 >>> Nov 8 23:05:54 knummi kernel: [ 11.827364] snd_hda_intel >>> 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 >>> Nov 8 23:05:54 knummi kernel: [ 11.827367] hda_intel: Disabling MSI >>> Nov 8 23:05:54 knummi kernel: [ 11.827400] snd_hda_intel >>> 0000:01:00.1: setting latency timer to 64 >>> Nov 8 23:05:54 knummi kernel: [ 11.955418] KNC1-0: MAC addr = >>> 00:0a:ac:11:01:c6 >>> Nov 8 23:05:54 knummi kernel: [ 12.000993] r8169 0000:02:00.0: >>> eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2) >>> Nov 8 23:05:54 knummi kernel: [ 12.011185] r8169 0000:02:00.0: >>> eth0: link down >>> Nov 8 23:05:54 knummi kernel: [ 12.011190] r8169 0000:02:00.0: >>> eth0: link down >>> Nov 8 23:05:54 knummi kernel: [ 12.011841] ADDRCONF(NETDEV_UP): >>> eth0: link is not ready >>> Nov 8 23:05:54 knummi kernel: [ 12.078069] HDMI status: Codec=0 >>> Pin=5 Presence_Detect=0 ELD_Valid=0 >>> Nov 8 23:05:54 knummi kernel: [ 12.117059] HDMI status: Codec=1 >>> Pin=5 Presence_Detect=0 ELD_Valid=0 >>> Nov 8 23:05:54 knummi kernel: [ 12.156060] HDMI status: Codec=2 >>> Pin=5 Presence_Detect=0 ELD_Valid=0 >>> Nov 8 23:05:54 knummi kernel: [ 12.172106] DVB: registering adapter >>> 0 frontend 0 (Philips TDA10046H DVB-T)... >>> Nov 8 23:05:54 knummi kernel: [ 12.172211] budget-av: ci interface >>> initialised. >>> Nov 8 23:05:54 knummi kernel: [ 12.172258] budget_av 0000:06:06.0: >>> PCI INT A -> GSI 21 (level, low) -> IRQ 21 >>> Nov 8 23:05:54 knummi kernel: [ 12.172294] saa7146: found saa7146 @ >>> mem ffffc9001195c000 (revision 1, irq 21) (0x153b,0x1157). >>> Nov 8 23:05:54 knummi kernel: [ 12.172298] saa7146 (1): dma buffer >>> size 192512 >>> Nov 8 23:05:54 knummi kernel: [ 12.172300] DVB: registering new >>> adapter (Terratec Cinergy 1200 DVB-T) >>> Nov 8 23:05:54 knummi kernel: [ 12.191064] adapter failed MAC >>> signature check >>> Nov 8 23:05:54 knummi kernel: [ 12.191066] encoded MAC from EEPROM >>> was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff >>> Nov 8 23:05:54 knummi kernel: [ 12.196033] HDMI status: Codec=3 >>> Pin=5 Presence_Detect=0 ELD_Valid=0 >>> Nov 8 23:05:54 knummi kernel: [ 12.199674] kjournald starting. >>> Commit interval 5 seconds >>> Nov 8 23:05:54 knummi kernel: [ 12.214251] input: HDA NVidia >>> HDMI/DP as >>> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7 >>> Nov 8 23:05:54 knummi kernel: [ 12.214295] input: HDA NVidia >>> HDMI/DP as >>> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 >>> Nov 8 23:05:54 knummi kernel: [ 12.214336] input: HDA NVidia >>> HDMI/DP as >>> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 >>> Nov 8 23:05:54 knummi kernel: [ 12.214375] input: HDA NVidia >>> HDMI/DP as >>> /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 >>> Nov 8 23:05:54 knummi kernel: [ 12.289248] EXT3-fs (md0): using >>> internal journal >>> Nov 8 23:05:54 knummi kernel: [ 12.289252] EXT3-fs (md0): mounted >>> filesystem with ordered data mode >>> Nov 8 23:05:54 knummi kernel: [ 12.532260] KNC1-1: MAC addr = >>> 00:0a:ac:11:02:44 >>> Nov 8 23:05:54 knummi kernel: [ 12.633258] DVB: registering adapter >>> 1 frontend 0 (Philips TDA10046H DVB-T)... >>> Nov 8 23:05:54 knummi kernel: [ 12.633463] budget-av: ci interface >>> initialised. >>> Nov 8 23:05:54 knummi kernel: [ 13.154236] r8169 0000:05:00.0: >>> eth1: link down >>> Nov 8 23:05:54 knummi kernel: [ 13.154880] ADDRCONF(NETDEV_UP): >>> eth1: link is not ready >>> Nov 8 23:05:55 knummi kernel: [ 13.596502] sshd (1114): >>> /proc/1114/oom_adj is deprecated, please use /proc/1114/oom_score_adj >>> instead. >>> Nov 8 23:05:55 knummi kernel: [ 14.101409] r8169 0000:02:00.0: >>> eth0: link up >>> Nov 8 23:05:55 knummi kernel: [ 14.102101] ADDRCONF(NETDEV_CHANGE): >>> eth0: link becomes ready >>> Nov 8 23:05:56 knummi kernel: [ 14.821373] r8169 0000:05:00.0: >>> eth1: link up >>> Nov 8 23:05:56 knummi kernel: [ 14.822023] ADDRCONF(NETDEV_CHANGE): >>> eth1: link becomes ready >>> Nov 8 23:05:58 knummi kernel: [ 16.940121] audit_printk_skb: 57 >>> callbacks suppressed >>> Nov 8 23:05:58 knummi kernel: [ 16.940123] type=1400 >>> audit(1320786358.734:31): apparmor="STATUS" operation="profile_load" >>> name="/usr/lib/libvirt/virt-aa-helper" pid=1207 comm="apparmor_parser" >>> Nov 8 23:05:59 knummi kernel: [ 17.245545] ip_tables: (C) 2000-2006 >>> Netfilter Core Team >>> Nov 8 23:05:59 knummi kernel: [ 17.816220] Netfilter messages via >>> NETLINK v0.30. >>> Nov 8 23:05:59 knummi kernel: [ 17.828933] nf_conntrack version >>> 0.5.0 (16384 buckets, 65536 max) >>> Nov 8 23:05:59 knummi kernel: [ 17.974851] ip6_tables: (C) >>> 2000-2006 Netfilter Core Team >>> Nov 8 23:05:59 knummi kernel: [ 17.975149] NF_TPROXY: Transparent >>> proxy support initialized, version 4.1.0 >>> Nov 8 23:05:59 knummi kernel: [ 17.975151] NF_TPROXY: Copyright (c) >>> 2006-2007 BalaBit IT Ltd. >>> Nov 8 23:05:59 knummi kernel: [ 18.010707] ctnetlink v0.93: >>> registering with nfnetlink. >>> Nov 8 23:05:59 knummi kernel: [ 18.076707] ipt_CLUSTERIP: ClusterIP >>> Version 0.8 loaded successfully >>> Nov 8 23:06:00 knummi kernel: [ 18.410271] xt_time: kernel timezone >>> is +0200 >>> Nov 8 23:06:00 knummi kernel: [ 18.518999] Bridge firewalling >>> registered >>> Nov 8 23:06:00 knummi kernel: [ 18.779421] u32 classifier >>> Nov 8 23:06:00 knummi kernel: [ 18.779423] Actions configured >>> Nov 8 23:06:03 knummi kernel: [ 21.568088] xhci_hcd 0000:04:00.0: >>> xHCI host not responding to stop endpoint command. >>> Nov 8 23:06:03 knummi kernel: [ 21.568098] xhci_hcd 0000:04:00.0: >>> Assuming host is dying, halting host. >>> Nov 8 23:06:03 knummi kernel: [ 21.568154] Bluetooth: hci0 urb >>> ffff880220c78b40 failed to resubmit (22) >>> Nov 8 23:06:03 knummi kernel: [ 21.568283] Bluetooth: hci0 urb >>> ffff88021f1e29c0 failed to resubmit (22) >>> Nov 8 23:06:03 knummi kernel: [ 21.568399] Bluetooth: hci0 urb >>> ffff88021f1e20c0 failed to resubmit (22) >>> Nov 8 23:06:03 knummi kernel: [ 21.568520] xhci_hcd 0000:04:00.0: >>> HC died; cleaning up >>> Nov 8 23:06:03 knummi kernel: [ 21.568647] hub 4-0:1.0: state 0 >>> ports 2 chg 0000 evt 0000 >>> Nov 8 23:06:03 knummi kernel: [ 21.568656] usb 4-2.4: modprobe >>> timed out on ep0out len=0/0 >>> Nov 8 23:06:03 knummi kernel: [ 21.568669] uvcvideo: UVC non >>> compliance - GET_DEF(PROBE) not supported. Enabling workaround. >>> Nov 8 23:06:03 knummi kernel: [ 21.568677] usb 4-1: USB disconnect, >>> device number 2 >>> Nov 8 23:06:03 knummi kernel: [ 21.568683] usb 4-1: unregistering >>> device >>> Nov 8 23:06:03 knummi kernel: [ 21.568690] usb 4-1: unregistering >>> interface 4-1:1.0 >>> Nov 8 23:06:03 knummi kernel: [ 21.568698] uvcvideo: Failed to >>> query (129) UVC probe control : -19 (exp. 26). >>> Nov 8 23:06:03 knummi kernel: [ 21.568723] uvcvideo: Failed to >>> initialize the device (-5). >>> Nov 8 23:06:03 knummi kernel: [ 21.568962] snd-usb-audio 4-2.4:1.2: >>> usb_probe_interface >>> Nov 8 23:06:03 knummi kernel: [ 21.568976] snd-usb-audio 4-2.4:1.2: >>> usb_probe_interface - got id >>> Nov 8 23:06:03 knummi kernel: [ 21.568983] usbcore: registered new >>> interface driver uvcvideo >>> Nov 8 23:06:03 knummi kernel: [ 21.568989] USB Video Class driver >>> (1.1.1) >>> Nov 8 23:06:03 knummi kernel: [ 21.584409] usb 4-1: >>> usb_disable_device nuking all URBs >>> Nov 8 23:06:03 knummi kernel: [ 21.584462] usb 4-2.4: Not enough >>> bandwidth for altsetting 1 >>> Nov 8 23:06:03 knummi kernel: [ 21.584475] 6:3:1: cannot set freq >>> 16000 to ep 0x86 >>> Nov 8 23:06:03 knummi kernel: [ 21.584508] usb 4-2.4: Not enough >>> bandwidth for altsetting 2 >>> Nov 8 23:06:03 knummi kernel: [ 21.584515] 6:3:2: cannot set freq >>> 24000 to ep 0x86 >>> Nov 8 23:06:03 knummi kernel: [ 21.584533] usb 4-2.4: Not enough >>> bandwidth for altsetting 3 >>> Nov 8 23:06:03 knummi kernel: [ 21.584540] 6:3:3: cannot set freq >>> 32000 to ep 0x86 >>> Nov 8 23:06:03 knummi kernel: [ 21.584560] usb 4-2.4: Not enough >>> bandwidth for altsetting 4 >>> Nov 8 23:06:03 knummi kernel: [ 21.584566] 6:3:4: cannot set freq >>> 48000 to ep 0x86 >>> Nov 8 23:06:03 knummi kernel: [ 21.584584] usb 4-2.4: Not enough >>> bandwidth for altsetting 0 >>> Nov 8 23:06:03 knummi kernel: [ 21.584973] usb 4-2: USB disconnect, >>> device number 3 >>> Nov 8 23:06:03 knummi kernel: [ 21.584980] usb 4-2.1: USB >>> disconnect, device number 4 >>> Nov 8 23:06:03 knummi kernel: [ 21.584987] usb 4-2.1: >>> unregistering device >>> Nov 8 23:06:03 knummi kernel: [ 21.584993] usb 4-2.1: unregistering >>> interface 4-2.1:1.0 >>> Nov 8 23:06:03 knummi kernel: [ 21.585345] usbcore: registered new >>> interface driver snd-usb-audio >>> Nov 8 23:06:03 knummi kernel: [ 21.600419] usb 4-2.1: unregistering >>> interface 4-2.1:1.1 >>> Nov 8 23:06:03 knummi kernel: [ 21.610455] usb 4-2.1: >>> usb_disable_device nuking all URBs >>> Nov 8 23:06:03 knummi kernel: [ 21.614251] usb 4-2.3: USB >>> disconnect, device number 5 >>> Nov 8 23:06:03 knummi kernel: [ 21.614259] usb 4-2.3: >>> unregistering device >>> Nov 8 23:06:03 knummi kernel: [ 21.614266] usb 4-2.3: unregistering >>> interface 4-2.3:1.0 >>> Nov 8 23:06:03 knummi kernel: [ 21.615037] usb 4-2.3: unregistering >>> interface 4-2.3:1.1 >>> Nov 8 23:06:03 knummi kernel: [ 21.615116] usb 4-2.3: unregistering >>> interface 4-2.3:1.2 >>> Nov 8 23:06:03 knummi kernel: [ 21.615164] usb 4-2.3: >>> usb_disable_device nuking all URBs >>> Nov 8 23:06:03 knummi kernel: [ 21.616854] usb 4-2.4: USB >>> disconnect, device number 6 >>> Nov 8 23:06:03 knummi kernel: [ 21.616862] usb 4-2.4: >>> unregistering device >>> Nov 8 23:06:03 knummi kernel: [ 21.616869] usb 4-2.4: unregistering >>> interface 4-2.4:1.0 >>> Nov 8 23:06:03 knummi kernel: [ 21.616945] usb 4-2.4: unregistering >>> interface 4-2.4:1.1 >>> Nov 8 23:06:03 knummi kernel: [ 21.616990] usb 4-2.4: unregistering >>> interface 4-2.4:1.2 >>> Nov 8 23:06:03 knummi kernel: [ 21.617535] usb 4-2.4: unregistering >>> interface 4-2.4:1.3 >>> Nov 8 23:06:03 knummi kernel: [ 21.617595] usb 4-2.4: >>> usb_disable_device nuking all URBs >>> Nov 8 23:06:03 knummi kernel: [ 21.617794] usb 4-2: unregistering >>> device >>> Nov 8 23:06:03 knummi kernel: [ 21.617802] usb 4-2: unregistering >>> interface 4-2:1.0 >>> Nov 8 23:06:03 knummi kernel: [ 21.617887] usb 4-2: >>> usb_disable_device nuking all URBs >>> Nov 8 23:06:03 knummi kernel: [ 21.618069] hub 5-0:1.0: state 0 >>> ports 2 chg 0000 evt 0000 >>> Nov 8 23:06:03 knummi kernel: [ 21.792610] type=1400 >>> audit(1320786363.587:32): apparmor="STATUS" >>> operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" >>> pid=2212 comm="apparmor_parser" >>> Nov 8 23:06:03 knummi kernel: [ 21.792674] type=1400 >>> audit(1320786363.587:33): apparmor="STATUS" >>> operation="profile_replace" name="/usr/sbin/cupsd" pid=2212 >>> comm="apparmor_parser" >>> Nov 8 23:06:04 knummi kernel: [ 22.678116] ADDRCONF(NETDEV_UP): >>> virbr0: link is not ready >>> Nov 8 23:06:05 knummi kernel: [ 23.661842] Adding 7992252k swap on >>> /dev/mapper/cryptswap1. Priority:-1 extents:1 across:7992252k >>> Nov 8 23:06:06 knummi kernel: [ 24.146040] eth0: no IPv6 routers >>> present >>> Nov 8 23:06:06 knummi kernel: [ 25.082047] eth1: no IPv6 routers >>> present >>> Nov 8 23:06:18 knummi kernel: [ 36.258492] EXT4-fs (md1): >>> re-mounted. Opts: user_xattr,errors=remount-ro,commit=0 >>> Nov 8 23:06:18 knummi kernel: [ 36.263331] EXT4-fs (sda1): >>> re-mounted. Opts: user_xattr,errors=remount-ro,commit=0 >>> >>> Regards, >>> Tomi Orava >>> >>> >>> > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
