Re: kernel 3.1 & SB700/SB800: No working usb devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 


Quoting Andiry Xu <andiry.xu@xxxxxxx>:


On 11/08/2011 01:35 PM, Tomi Orava wrote:


Hi,


The USB 2.0 hub doesn't want to enumerate under EHCI.  -32 is -EPIPE,
which is a protocol error, maybe a stall?  In any case, it looks like
your hub is just not working.  Have you tried a different hub?  Or a
different cable to the hub?


I just wanted to verify that all the end devices are ok and working,
so I plugged the Cypress usb 2.0 hub & logitech web camera to
my lenovo laptop (standard log below) and everything is working just fine.
I'm currently using another logitech mouse via this hub.
Would it help to get more detailed usb debug log out of these devices
while connected to a host where they do work ?



Please try the patch attached, connect the hub to the USB2.0 ports on
your original board to see if it helps.


Here is the full kernel log with your & Sarah's patches applied.

Nov  8 23:05:54 knummi kernel: imklog 4.2.0, log source = /proc/kmsg started.
Nov 8 23:05:54 knummi kernel: [ 0.000000] Initializing cgroup subsys cpuset 
Nov  8 23:05:54 knummi kernel: [    0.000000] Initializing cgroup subsys cpu
Nov 8 23:05:54 knummi kernel: [ 0.000000] Linux version 3.1.0-tmo5 (root@tipoca) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP Tue Nov 8 22:39:46 EET 2011 Nov 8 23:05:54 knummi kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.1.0-tmo5 root=UUID=69fbf031-8b40-4167-860c-2024ab4f8ae9 ro 
Nov  8 23:05:54 knummi kernel: [    0.000000] BIOS-provided physical RAM map:
Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cd952000 (usable) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cd952000 - 00000000cd99f000 (ACPI NVS) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cd99f000 - 00000000cd9a8000 (ACPI data) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cd9a8000 - 00000000cdae0000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdae0000 - 00000000cdaf1000 (ACPI NVS) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdaf1000 - 00000000cdb04000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdb04000 - 00000000cdb06000 (ACPI NVS) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdb06000 - 00000000cdb0f000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdb0f000 - 00000000cdb15000 (ACPI NVS) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdb15000 - 00000000cdb77000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdb77000 - 00000000cdd7a000 (ACPI NVS) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000cdd7a000 - 00000000cdf00000 (usable) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fec20000 - 00000000fec21000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] BIOS-e820: 0000000100001000 - 0000000230000000 (usable) Nov 8 23:05:54 knummi kernel: [ 0.000000] NX (Execute Disable) protection: active 
Nov  8 23:05:54 knummi kernel: [    0.000000] DMI 2.7 present.
Nov 8 23:05:54 knummi kernel: [ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 PRO, BIOS 0810 09/29/2011 Nov 8 23:05:54 knummi kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) 
Nov  8 23:05:54 knummi kernel: [    0.000000] No AGP bridge found
Nov 8 23:05:54 knummi kernel: [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 
Nov  8 23:05:54 knummi kernel: [    0.000000] MTRR default type: uncachable
Nov  8 23:05:54 knummi kernel: [    0.000000] MTRR fixed ranges enabled:
Nov  8 23:05:54 knummi kernel: [    0.000000]   00000-9FFFF write-back
Nov  8 23:05:54 knummi kernel: [    0.000000]   A0000-BFFFF write-through
Nov  8 23:05:54 knummi kernel: [    0.000000]   C0000-CDFFF write-protect
Nov  8 23:05:54 knummi kernel: [    0.000000]   CE000-EBFFF uncachable
Nov  8 23:05:54 knummi kernel: [    0.000000]   EC000-FFFFF write-protect
Nov  8 23:05:54 knummi kernel: [    0.000000] MTRR variable ranges enabled:
Nov 8 23:05:54 knummi kernel: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back Nov 8 23:05:54 knummi kernel: [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back Nov 8 23:05:54 knummi kernel: [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back Nov 8 23:05:54 knummi kernel: [ 0.000000] 3 base 0000CDF00000 mask FFFFFFF00000 uncachable Nov 8 23:05:54 knummi kernel: [ 0.000000] 4 base 0000CE000000 mask FFFFFE000000 uncachable 
Nov  8 23:05:54 knummi kernel: [    0.000000]   5 disabled
Nov  8 23:05:54 knummi kernel: [    0.000000]   6 disabled
Nov  8 23:05:54 knummi kernel: [    0.000000]   7 disabled
Nov  8 23:05:54 knummi kernel: [    0.000000] TOM2: 0000000230000000 aka 8960M
Nov 8 23:05:54 knummi kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Nov 8 23:05:54 knummi kernel: [ 0.000000] e820 update range: 00000000cdf00000 - 0000000100000000 (usable) ==> (reserved) Nov 8 23:05:54 knummi kernel: [ 0.000000] last_pfn = 0xcdf00 max_arch_pfn = 0x400000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 Nov 8 23:05:54 knummi kernel: [ 0.000000] Using GB pages for direct mapping Nov 8 23:05:54 knummi kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000cdf00000 
Nov  8 23:05:54 knummi kernel: [    0.000000]  0000000000 - 00c0000000 page 1G
Nov  8 23:05:54 knummi kernel: [    0.000000]  00c0000000 - 00cde00000 page 2M
Nov  8 23:05:54 knummi kernel: [    0.000000]  00cde00000 - 00cdf00000 page 4k
Nov 8 23:05:54 knummi kernel: [ 0.000000] kernel direct mapping tables up to cdf00000 @ 1fffd000-20000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 
Nov  8 23:05:54 knummi kernel: [    0.000000]  0100000000 - 0200000000 page 1G
Nov  8 23:05:54 knummi kernel: [    0.000000]  0200000000 - 0230000000 page 2M
Nov 8 23:05:54 knummi kernel: [ 0.000000] kernel direct mapping tables up to 230000000 @ cdefe000-cdf00000 
Nov  8 23:05:54 knummi kernel: [    0.000000] RAMDISK: 3752f000 - 37ff0000
Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: XSDT 00000000cd99f068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: FACP 00000000cd9a6df0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: DSDT 00000000cd99f140 07CA9 (v02 ALASKA A M I 00000000 INTL 20051117) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: FACS 00000000cdb0ff80 00040 Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: APIC 00000000cd9a6ee8 0009E (v03 ALASKA A M I 01072009 AMI 00010013) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: MCFG 00000000cd9a6f88 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: HPET 00000000cd9a6fc8 00038 (v01 ALASKA A M I 01072009 AMI 00000004) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: SSDT 00000000cd9a7000 008BC (v01 AMD POWERNOW 00000001 AMD 00000001) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 8 23:05:54 knummi kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24 
Nov  8 23:05:54 knummi kernel: [    0.000000] No NUMA configuration found
Nov 8 23:05:54 knummi kernel: [ 0.000000] Faking a node at 0000000000000000-0000000230000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] NODE_DATA [000000022fffb000 - 000000022fffffff] Nov 8 23:05:54 knummi kernel: [ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0 
Nov  8 23:05:54 knummi kernel: [    0.000000] Zone PFN ranges:
Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Nov 8 23:05:54 knummi kernel: [ 0.000000] Normal 0x00100000 -> 0x00230000 Nov 8 23:05:54 knummi kernel: [ 0.000000] Movable zone start PFN for each node Nov 8 23:05:54 knummi kernel: [ 0.000000] early_node_map[4] active PFN ranges 
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x00000010 -> 0x0000009d
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x00000100 -> 0x000cd952
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x000cdd7a -> 0x000cdf00
Nov  8 23:05:54 knummi kernel: [    0.000000]     0: 0x00100001 -> 0x00230000
Nov  8 23:05:54 knummi kernel: [    0.000000] On node 0 totalpages: 2087524
Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA zone: 64 pages used for memmap 
Nov  8 23:05:54 knummi kernel: [    0.000000]   DMA zone: 5 pages reserved
Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA32 zone: 16320 pages used for memmap Nov 8 23:05:54 knummi kernel: [ 0.000000] DMA32 zone: 822040 pages, LIFO batch:31 Nov 8 23:05:54 knummi kernel: [ 0.000000] Normal zone: 19456 pages used for memmap Nov 8 23:05:54 knummi kernel: [ 0.000000] Normal zone: 1225727 pages, LIFO batch:31 
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x808
Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0]) Nov 8 23:05:54 knummi kernel: [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24]) Nov 8 23:05:54 knummi kernel: [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55 Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) 
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IRQ0 used by override.
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IRQ2 used by override.
Nov  8 23:05:54 knummi kernel: [    0.000000] ACPI: IRQ9 used by override.
Nov 8 23:05:54 knummi kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Nov 8 23:05:54 knummi kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 Nov 8 23:05:54 knummi kernel: [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs 
Nov  8 23:05:54 knummi kernel: [    0.000000] nr_irqs_gsi: 72
Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cd952000 - 00000000cd99f000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cd99f000 - 00000000cd9a8000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cd9a8000 - 00000000cdae0000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdae0000 - 00000000cdaf1000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdaf1000 - 00000000cdb04000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdb04000 - 00000000cdb06000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdb06000 - 00000000cdb0f000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdb0f000 - 00000000cdb15000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdb15000 - 00000000cdb77000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdb77000 - 00000000cdd7a000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000cdf00000 - 00000000f8000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fec20000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec20000 - 00000000fec21000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec21000 - 00000000fed00000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000 Nov 8 23:05:54 knummi kernel: [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000 Nov 8 23:05:54 knummi kernel: [ 0.000000] Allocating PCI resources starting at cdf00000 (gap: cdf00000:2a100000) Nov 8 23:05:54 knummi kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Nov 8 23:05:54 knummi kernel: [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 Nov 8 23:05:54 knummi kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s81152 r8192 d21248 u262144 Nov 8 23:05:54 knummi kernel: [ 0.000000] pcpu-alloc: s81152 r8192 d21248 u262144 alloc=1*2097152 
Nov  8 23:05:54 knummi kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Nov 8 23:05:54 knummi kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2051679 
Nov  8 23:05:54 knummi kernel: [    0.000000] Policy zone: Normal
Nov 8 23:05:54 knummi kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.1.0-tmo5 root=UUID=69fbf031-8b40-4167-860c-2024ab4f8ae9 ro Nov 8 23:05:54 knummi kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 
Nov  8 23:05:54 knummi kernel: [    0.000000] Checking aperture...
Nov  8 23:05:54 knummi kernel: [    0.000000] No AGP bridge found
Nov 8 23:05:54 knummi kernel: [ 0.000000] Node 0: aperture @ f8000000 size 64 MB Nov 8 23:05:54 knummi kernel: [ 0.000000] Memory: 8127572k/9175040k available (5772k kernel code, 824944k absent, 222524k reserved, 5213k data, 952k init) Nov 8 23:05:54 knummi kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 
Nov  8 23:05:54 knummi kernel: [    0.000000] Hierarchical RCU implementation.
Nov 8 23:05:54 knummi kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. 
Nov  8 23:05:54 knummi kernel: [    0.000000] NR_IRQS:16640 nr_irqs:1288 16
Nov  8 23:05:54 knummi kernel: [    0.000000] Extended CMOS year: 2000
Nov  8 23:05:54 knummi kernel: [    0.000000] spurious 8259A interrupt: IRQ7.
Nov  8 23:05:54 knummi kernel: [    0.000000] Console: colour VGA+ 80x25
Nov  8 23:05:54 knummi kernel: [    0.000000] console [tty0] enabled
Nov 8 23:05:54 knummi kernel: [ 0.000000] allocated 67108864 bytes of page_cgroup Nov 8 23:05:54 knummi kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups 
Nov  8 23:05:54 knummi kernel: [    0.000000] hpet clockevent registered
Nov  8 23:05:54 knummi kernel: [    0.000000] Fast TSC calibration using PIT
Nov  8 23:05:54 knummi kernel: [    0.000000] Detected 3411.228 MHz processor.
Nov 8 23:05:54 knummi kernel: [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.45 BogoMIPS (lpj=3411228) Nov 8 23:05:54 knummi kernel: [ 0.001124] pid_max: default: 32768 minimum: 301 
Nov  8 23:05:54 knummi kernel: [    0.001203] Security Framework initialized
Nov  8 23:05:54 knummi kernel: [    0.001269] AppArmor: AppArmor initialized
Nov 8 23:05:54 knummi kernel: [ 0.002374] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Nov 8 23:05:54 knummi kernel: [ 0.004459] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Nov 8 23:05:54 knummi kernel: [ 0.005408] Mount-cache hash table entries: 256 Nov 8 23:05:54 knummi kernel: [ 0.005567] Initializing cgroup subsys cpuacct Nov 8 23:05:54 knummi kernel: [ 0.005628] Initializing cgroup subsys memory Nov 8 23:05:54 knummi kernel: [ 0.005692] Initializing cgroup subsys devices Nov 8 23:05:54 knummi kernel: [ 0.005751] Initializing cgroup subsys freezer Nov 8 23:05:54 knummi kernel: [ 0.005810] Initializing cgroup subsys net_cls 
Nov  8 23:05:54 knummi kernel: [    0.005887] tseg: 00cdf00000
Nov  8 23:05:54 knummi kernel: [    0.005889] CPU: Physical Processor ID: 0
Nov  8 23:05:54 knummi kernel: [    0.005947] CPU: Processor Core ID: 0
Nov  8 23:05:54 knummi kernel: [    0.006002] mce: CPU supports 6 MCE banks
Nov 8 23:05:54 knummi kernel: [ 0.006065] using AMD E400 aware idle routine 
Nov  8 23:05:54 knummi kernel: [    0.007355] ACPI: Core revision 20110623
Nov 8 23:05:54 knummi kernel: [ 0.010011] ftrace: allocating 21951 entries in 87 pages Nov 8 23:05:54 knummi kernel: [ 0.011334] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Nov 8 23:05:54 knummi kernel: [ 0.021960] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03 Nov 8 23:05:54 knummi kernel: [ 0.022998] Performance Events: AMD PMU driver. 
Nov  8 23:05:54 knummi kernel: [    0.022998] ... version:                0
Nov  8 23:05:54 knummi kernel: [    0.022998] ... bit width:              48
Nov  8 23:05:54 knummi kernel: [    0.022998] ... generic registers:      4
Nov 8 23:05:54 knummi kernel: [ 0.022998] ... value mask: 0000ffffffffffff Nov 8 23:05:54 knummi kernel: [ 0.022998] ... max period: 00007fffffffffff 
Nov  8 23:05:54 knummi kernel: [    0.022998] ... fixed-purpose events:   0
Nov 8 23:05:54 knummi kernel: [ 0.022998] ... event mask: 000000000000000f 
Nov  8 23:05:54 knummi kernel: [    0.022998] Booting Node   0, Processors  #1
Nov  8 23:05:54 knummi kernel: [    0.022998] smpboot cpu 1: start_ip = 98000
Nov  8 23:05:54 knummi kernel: [    0.094002] System has AMD C1E enabled
Nov  8 23:05:54 knummi kernel: [    0.094037]  #2
Nov  8 23:05:54 knummi kernel: [    0.094038] smpboot cpu 2: start_ip = 98000
Nov  8 23:05:54 knummi kernel: [    0.094123] Switch to broadcast mode on CPU1
Nov  8 23:05:54 knummi kernel: [    0.165995] Switch to broadcast mode on CPU2
Nov  8 23:05:54 knummi kernel: [    0.166033]  #3
Nov  8 23:05:54 knummi kernel: [    0.166034] smpboot cpu 3: start_ip = 98000
Nov  8 23:05:54 knummi kernel: [    0.237986] Brought up 4 CPUs
Nov  8 23:05:54 knummi kernel: [    0.237985] Switch to broadcast mode on CPU3
Nov 8 23:05:54 knummi kernel: [ 0.238102] Total of 4 processors activated (27290.84 BogoMIPS). 
Nov  8 23:05:54 knummi kernel: [    0.239064] Switch to broadcast mode on CPU0
Nov  8 23:05:54 knummi kernel: [    0.239064] devtmpfs: initialized
Nov 8 23:05:54 knummi kernel: [ 0.239108] PM: Registering ACPI NVS region at cd952000 (315392 bytes) Nov 8 23:05:54 knummi kernel: [ 0.239108] PM: Registering ACPI NVS region at cdae0000 (69632 bytes) Nov 8 23:05:54 knummi kernel: [ 0.239108] PM: Registering ACPI NVS region at cdb04000 (8192 bytes) Nov 8 23:05:54 knummi kernel: [ 0.239168] PM: Registering ACPI NVS region at cdb0f000 (24576 bytes) Nov 8 23:05:54 knummi kernel: [ 0.239234] PM: Registering ACPI NVS region at cdb77000 (2109440 bytes) 
Nov  8 23:05:54 knummi kernel: [    0.240557] print_constraints: dummy:
Nov 8 23:05:54 knummi kernel: [ 0.240632] RTC time: 21:05:41, date: 11/08/11 Nov 8 23:05:54 knummi kernel: [ 0.240716] NET: Registered protocol family 16 Nov 8 23:05:54 knummi kernel: [ 0.241026] node 0 link 0: io port [b000, ffff] 
Nov  8 23:05:54 knummi kernel: [    0.241028] TOM: 00000000d0000000 aka 3328M
Nov 8 23:05:54 knummi kernel: [ 0.241086] Fam 10h mmconf [e0000000, efffffff] Nov 8 23:05:54 knummi kernel: [ 0.241088] node 0 link 0: mmio [d0000000, fef0ffff] ==> [d0000000, dfffffff] and [f0000000, fef0ffff] 
Nov  8 23:05:54 knummi kernel: [    0.241092] TOM2: 0000000230000000 aka 8960M
Nov  8 23:05:54 knummi kernel: [    0.241150] bus: [00, 1f] on node 0 link 0
Nov 8 23:05:54 knummi kernel: [ 0.241152] bus: 00 index 0 [io 0x0000-0xffff] Nov 8 23:05:54 knummi kernel: [ 0.241153] bus: 00 index 1 [mem 0xd0000000-0xdfffffff] Nov 8 23:05:54 knummi kernel: [ 0.241155] bus: 00 index 2 [mem 0xf0000000-0xffffffff] Nov 8 23:05:54 knummi kernel: [ 0.241156] bus: 00 index 3 [mem 0x230000000-0xfcffffffff] Nov 8 23:05:54 knummi kernel: [ 0.241163] Extended Config Space enabled on 1 nodes 
Nov  8 23:05:54 knummi kernel: [    0.241236] ACPI: bus type pci registered
Nov 8 23:05:54 knummi kernel: [ 0.241328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) 
Nov  8 23:05:54 knummi kernel: [    0.241409] PCI: not using MMCONFIG
Nov 8 23:05:54 knummi kernel: [ 0.241466] PCI: Using configuration type 1 for base access Nov 8 23:05:54 knummi kernel: [ 0.241526] PCI: Using configuration type 1 for extended access 
Nov  8 23:05:54 knummi kernel: [    0.242054] bio: create slab <bio-0> at 0
Nov  8 23:05:54 knummi kernel: [    0.242056] ACPI: Added _OSI(Module Device)
Nov 8 23:05:54 knummi kernel: [ 0.242056] ACPI: Added _OSI(Processor Device) Nov 8 23:05:54 knummi kernel: [ 0.242111] ACPI: Added _OSI(3.0 _SCP Extensions) Nov 8 23:05:54 knummi kernel: [ 0.242169] ACPI: Added _OSI(Processor Aggregator Device) 
Nov  8 23:05:54 knummi kernel: [    0.243105] ACPI: EC: Look up EC in DSDT
Nov 8 23:05:54 knummi kernel: [ 0.243739] ACPI: Executed 2 blocks of module-level executable AML code Nov 8 23:05:54 knummi kernel: [ 0.249074] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) Nov 8 23:05:54 knummi kernel: [ 0.249267] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349) 
Nov  8 23:05:54 knummi kernel: [    0.249688] ACPI: Interpreter enabled
Nov  8 23:05:54 knummi kernel: [    0.249747] ACPI: (supports S0 S1 S3 S4 S5)
Nov 8 23:05:54 knummi kernel: [ 0.250025] ACPI: Using IOAPIC for interrupt routing Nov 8 23:05:54 knummi kernel: [ 0.250173] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Nov 8 23:05:54 knummi kernel: [ 0.250276] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources Nov 8 23:05:54 knummi kernel: [ 0.277589] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 
Nov  8 23:05:54 knummi kernel: [    0.277747] ACPI: No dock devices found.
Nov  8 23:05:54 knummi kernel: [    0.277805] HEST: Table not found.
Nov 8 23:05:54 knummi kernel: [ 0.277863] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Nov 8 23:05:54 knummi kernel: [ 0.278053] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Nov 8 23:05:54 knummi kernel: [ 0.278255] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] Nov 8 23:05:54 knummi kernel: [ 0.278318] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] Nov 8 23:05:54 knummi kernel: [ 0.278381] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df] Nov 8 23:05:54 knummi kernel: [ 0.278443] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] Nov 8 23:05:54 knummi kernel: [ 0.278506] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] Nov 8 23:05:54 knummi kernel: [ 0.278583] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] Nov 8 23:05:54 knummi kernel: [ 0.278661] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff] Nov 8 23:05:54 knummi kernel: [ 0.278749] pci 0000:00:00.0: [1002:5a14] type 0 class 0x000600 Nov 8 23:05:54 knummi kernel: [ 0.278792] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604 Nov 8 23:05:54 knummi kernel: [ 0.278813] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.278815] pci 0000:00:02.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.278827] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604 Nov 8 23:05:54 knummi kernel: [ 0.278847] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.278849] pci 0000:00:04.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.278860] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604 Nov 8 23:05:54 knummi kernel: [ 0.278880] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.278882] pci 0000:00:06.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.278892] pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604 Nov 8 23:05:54 knummi kernel: [ 0.278911] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.278914] pci 0000:00:07.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.278925] pci 0000:00:0a.0: [1002:5a1d] type 1 class 0x000604 Nov 8 23:05:54 knummi kernel: [ 0.278945] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.278947] pci 0000:00:0a.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.278979] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 Nov 8 23:05:54 knummi kernel: [ 0.278993] pci 0000:00:11.0: reg 10: [io 0xf040-0xf047] Nov 8 23:05:54 knummi kernel: [ 0.279000] pci 0000:00:11.0: reg 14: [io 0xf030-0xf033] Nov 8 23:05:54 knummi kernel: [ 0.279006] pci 0000:00:11.0: reg 18: [io 0xf020-0xf027] Nov 8 23:05:54 knummi kernel: [ 0.279013] pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013] Nov 8 23:05:54 knummi kernel: [ 0.279020] pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f] Nov 8 23:05:54 knummi kernel: [ 0.279027] pci 0000:00:11.0: reg 24: [mem 0xfe50b000-0xfe50b3ff] Nov 8 23:05:54 knummi kernel: [ 0.279060] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279070] pci 0000:00:12.0: reg 10: [mem 0xfe50a000-0xfe50afff] Nov 8 23:05:54 knummi kernel: [ 0.279120] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279134] pci 0000:00:12.2: reg 10: [mem 0xfe509000-0xfe5090ff] 
Nov  8 23:05:54 knummi kernel: [    0.279182] pci 0000:00:12.2: supports D1 D2
Nov 8 23:05:54 knummi kernel: [ 0.279184] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot 
Nov  8 23:05:54 knummi kernel: [    0.279187] pci 0000:00:12.2: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.279202] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279211] pci 0000:00:13.0: reg 10: [mem 0xfe508000-0xfe508fff] Nov 8 23:05:54 knummi kernel: [ 0.279260] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279274] pci 0000:00:13.2: reg 10: [mem 0xfe507000-0xfe5070ff] 
Nov  8 23:05:54 knummi kernel: [    0.279322] pci 0000:00:13.2: supports D1 D2
Nov 8 23:05:54 knummi kernel: [ 0.279324] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot 
Nov  8 23:05:54 knummi kernel: [    0.279327] pci 0000:00:13.2: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.279341] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 Nov 8 23:05:54 knummi kernel: [ 0.279394] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 Nov 8 23:05:54 knummi kernel: [ 0.279410] pci 0000:00:14.2: reg 10: [mem 0xfe500000-0xfe503fff 64bit] Nov 8 23:05:54 knummi kernel: [ 0.279450] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.279453] pci 0000:00:14.2: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.279462] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 Nov 8 23:05:54 knummi kernel: [ 0.279515] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 Nov 8 23:05:54 knummi kernel: [ 0.279543] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279552] pci 0000:00:14.5: reg 10: [mem 0xfe506000-0xfe506fff] Nov 8 23:05:54 knummi kernel: [ 0.279600] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279609] pci 0000:00:16.0: reg 10: [mem 0xfe505000-0xfe505fff] Nov 8 23:05:54 knummi kernel: [ 0.279658] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.279672] pci 0000:00:16.2: reg 10: [mem 0xfe504000-0xfe5040ff] 
Nov  8 23:05:54 knummi kernel: [    0.279720] pci 0000:00:16.2: supports D1 D2
Nov 8 23:05:54 knummi kernel: [ 0.279722] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot 
Nov  8 23:05:54 knummi kernel: [    0.279725] pci 0000:00:16.2: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.279738] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 Nov 8 23:05:54 knummi kernel: [ 0.279750] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 Nov 8 23:05:54 knummi kernel: [ 0.279759] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 Nov 8 23:05:54 knummi kernel: [ 0.279769] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 Nov 8 23:05:54 knummi kernel: [ 0.279781] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 Nov 8 23:05:54 knummi kernel: [ 0.279821] pci 0000:01:00.0: [10de:0de1] type 0 class 0x000300 Nov 8 23:05:54 knummi kernel: [ 0.279829] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Nov 8 23:05:54 knummi kernel: [ 0.279838] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd7ffffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.279847] pci 0000:01:00.0: reg 1c: [mem 0xd8000000-0xd9ffffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.279853] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f] Nov 8 23:05:54 knummi kernel: [ 0.279859] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref] Nov 8 23:05:54 knummi kernel: [ 0.279896] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403 Nov 8 23:05:54 knummi kernel: [ 0.279904] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff] Nov 8 23:05:54 knummi kernel: [ 0.281983] pci 0000:00:02.0: PCI bridge to [bus 01-01] Nov 8 23:05:54 knummi kernel: [ 0.282046] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] Nov 8 23:05:54 knummi kernel: [ 0.282049] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] Nov 8 23:05:54 knummi kernel: [ 0.282052] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.282085] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 Nov 8 23:05:54 knummi kernel: [ 0.282097] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff] Nov 8 23:05:54 knummi kernel: [ 0.282115] pci 0000:02:00.0: reg 18: [mem 0xda104000-0xda104fff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.282127] pci 0000:02:00.0: reg 20: [mem 0xda100000-0xda103fff 64bit pref] 
Nov  8 23:05:54 knummi kernel: [    0.282160] pci 0000:02:00.0: supports D1 D2
Nov 8 23:05:54 knummi kernel: [ 0.282162] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.282165] pci 0000:02:00.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.283982] pci 0000:00:04.0: PCI bridge to [bus 02-02] Nov 8 23:05:54 knummi kernel: [ 0.284045] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] Nov 8 23:05:54 knummi kernel: [ 0.284048] pci 0000:00:04.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.284085] pci 0000:03:00.0: [197b:2362] type 0 class 0x000101 Nov 8 23:05:54 knummi kernel: [ 0.284107] pci 0000:03:00.0: reg 10: [io 0xc040-0xc047] Nov 8 23:05:54 knummi kernel: [ 0.284116] pci 0000:03:00.0: reg 14: [io 0xc030-0xc033] Nov 8 23:05:54 knummi kernel: [ 0.284126] pci 0000:03:00.0: reg 18: [io 0xc020-0xc027] Nov 8 23:05:54 knummi kernel: [ 0.284135] pci 0000:03:00.0: reg 1c: [io 0xc010-0xc013] Nov 8 23:05:54 knummi kernel: [ 0.284145] pci 0000:03:00.0: reg 20: [io 0xc000-0xc00f] Nov 8 23:05:54 knummi kernel: [ 0.284155] pci 0000:03:00.0: reg 24: [mem 0xfe410000-0xfe4101ff] Nov 8 23:05:54 knummi kernel: [ 0.284164] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] Nov 8 23:05:54 knummi kernel: [ 0.284189] pci 0000:03:00.0: PME# supported from D3hot 
Nov  8 23:05:54 knummi kernel: [    0.284192] pci 0000:03:00.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.285982] pci 0000:00:06.0: PCI bridge to [bus 03-03] Nov 8 23:05:54 knummi kernel: [ 0.286044] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] Nov 8 23:05:54 knummi kernel: [ 0.286047] pci 0000:00:06.0: bridge window [mem 0xfe400000-0xfe4fffff] Nov 8 23:05:54 knummi kernel: [ 0.286084] pci 0000:04:00.0: [1b21:1042] type 0 class 0x000c03 Nov 8 23:05:54 knummi kernel: [ 0.286100] pci 0000:04:00.0: reg 10: [mem 0xfe300000-0xfe307fff 64bit] Nov 8 23:05:54 knummi kernel: [ 0.286170] pci 0000:04:00.0: PME# supported from D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.286173] pci 0000:04:00.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.287981] pci 0000:00:07.0: PCI bridge to [bus 04-04] Nov 8 23:05:54 knummi kernel: [ 0.288044] pci 0000:00:07.0: bridge window [mem 0xfe300000-0xfe3fffff] Nov 8 23:05:54 knummi kernel: [ 0.288082] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200 Nov 8 23:05:54 knummi kernel: [ 0.288095] pci 0000:05:00.0: reg 10: [io 0xb000-0xb0ff] Nov 8 23:05:54 knummi kernel: [ 0.288117] pci 0000:05:00.0: reg 18: [mem 0xfe200000-0xfe200fff 64bit] Nov 8 23:05:54 knummi kernel: [ 0.288142] pci 0000:05:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] 
Nov  8 23:05:54 knummi kernel: [    0.288175] pci 0000:05:00.0: supports D1 D2
Nov 8 23:05:54 knummi kernel: [ 0.288177] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold 
Nov  8 23:05:54 knummi kernel: [    0.288180] pci 0000:05:00.0: PME# disabled
Nov 8 23:05:54 knummi kernel: [ 0.288197] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Nov 8 23:05:54 knummi kernel: [ 0.288283] pci 0000:00:0a.0: PCI bridge to [bus 05-05] Nov 8 23:05:54 knummi kernel: [ 0.288345] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] Nov 8 23:05:54 knummi kernel: [ 0.288347] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff] Nov 8 23:05:54 knummi kernel: [ 0.288368] pci 0000:06:05.0: [1131:7146] type 0 class 0x000480 Nov 8 23:05:54 knummi kernel: [ 0.288381] pci 0000:06:05.0: reg 10: [mem 0xfe101000-0xfe1011ff] Nov 8 23:05:54 knummi kernel: [ 0.288442] pci 0000:06:06.0: [1131:7146] type 0 class 0x000480 Nov 8 23:05:54 knummi kernel: [ 0.288455] pci 0000:06:06.0: reg 10: [mem 0xfe100000-0xfe1001ff] Nov 8 23:05:54 knummi kernel: [ 0.288539] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288606] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff] Nov 8 23:05:54 knummi kernel: [ 0.288609] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288611] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288612] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288614] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288616] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288617] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288619] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode) Nov 8 23:05:54 knummi kernel: [ 0.288633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288706] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288781] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] Nov 8 23:05:54 knummi kernel: [ 0.288837] pci0000:00: Requesting ACPI _OSC control (0x1d) Nov 8 23:05:54 knummi kernel: [ 0.288899] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Nov 8 23:05:54 knummi kernel: [ 0.288966] ACPI _OSC control for PCIe not granted, disabling ASPM Nov 8 23:05:54 knummi kernel: [ 0.292238] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.292665] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.293088] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.293512] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.293929] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.294329] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.294738] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.295145] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 Nov 8 23:05:54 knummi kernel: [ 0.295572] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none 
Nov  8 23:05:54 knummi kernel: [    0.295572] vgaarb: loaded
Nov 8 23:05:54 knummi kernel: [ 0.295572] vgaarb: bridge control possible 0000:01:00.0 
Nov  8 23:05:54 knummi kernel: [    0.295572] SCSI subsystem initialized
Nov  8 23:05:54 knummi kernel: [    0.295974] libata version 3.00 loaded.
Nov  8 23:05:54 knummi kernel: [    0.296041] wmi: Mapper loaded
Nov  8 23:05:54 knummi kernel: [    0.296097] PCI: Using ACPI for IRQ routing
Nov 8 23:05:54 knummi kernel: [ 0.302191] PCI: pci_cache_line_size set to 64 bytes Nov 8 23:05:54 knummi kernel: [ 0.302260] reserve RAM buffer: 000000000009d800 - 000000000009ffff Nov 8 23:05:54 knummi kernel: [ 0.302262] reserve RAM buffer: 00000000cd952000 - 00000000cfffffff Nov 8 23:05:54 knummi kernel: [ 0.302265] reserve RAM buffer: 00000000cdf00000 - 00000000cfffffff 
Nov  8 23:05:54 knummi kernel: [    0.302316] NetLabel: Initializing
Nov 8 23:05:54 knummi kernel: [ 0.302372] NetLabel: domain hash size = 128 Nov 8 23:05:54 knummi kernel: [ 0.302430] NetLabel: protocols = UNLABELED CIPSOv4 Nov 8 23:05:54 knummi kernel: [ 0.302497] NetLabel: unlabeled traffic allowed by default Nov 8 23:05:54 knummi kernel: [ 0.302568] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Nov 8 23:05:54 knummi kernel: [ 0.302568] hpet0: 3 comparators, 32-bit 14.318180 MHz counter 
Nov  8 23:05:54 knummi kernel: [    0.303987] Switching to clocksource hpet
Nov  8 23:05:54 knummi kernel: [    0.305972] Switched to NOHz mode on CPU #3
Nov  8 23:05:54 knummi kernel: [    0.305975] Switched to NOHz mode on CPU #2
Nov  8 23:05:54 knummi kernel: [    0.305978] Switched to NOHz mode on CPU #1
Nov  8 23:05:54 knummi kernel: [    0.305979] Switched to NOHz mode on CPU #0
Nov 8 23:05:54 knummi kernel: [ 0.308983] AppArmor: AppArmor Filesystem Enabled 
Nov  8 23:05:54 knummi kernel: [    0.309064] pnp: PnP ACPI init
Nov  8 23:05:54 knummi kernel: [    0.309127] ACPI: bus type pnp registered
Nov  8 23:05:54 knummi kernel: [    0.309269] pnp 00:00: [bus 00-ff]
Nov  8 23:05:54 knummi kernel: [    0.309271] pnp 00:00: [io  0x0cf8-0x0cff]
Nov 8 23:05:54 knummi kernel: [ 0.309273] pnp 00:00: [io 0x0000-0x03af window] Nov 8 23:05:54 knummi kernel: [ 0.309274] pnp 00:00: [io 0x03e0-0x0cf7 window] Nov 8 23:05:54 knummi kernel: [ 0.309275] pnp 00:00: [io 0x03b0-0x03df window] Nov 8 23:05:54 knummi kernel: [ 0.309277] pnp 00:00: [io 0x0d00-0xffff window] Nov 8 23:05:54 knummi kernel: [ 0.309278] pnp 00:00: [mem 0x000a0000-0x000bffff window] Nov 8 23:05:54 knummi kernel: [ 0.309280] pnp 00:00: [mem 0x000c0000-0x000dffff window] Nov 8 23:05:54 knummi kernel: [ 0.309281] pnp 00:00: [mem 0xd0000000-0xffffffff window] Nov 8 23:05:54 knummi kernel: [ 0.309282] pnp 00:00: [mem 0x00000000 window] Nov 8 23:05:54 knummi kernel: [ 0.309312] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Nov 8 23:05:54 knummi kernel: [ 0.309331] pnp 00:01: [mem 0xe0000000-0xefffffff] Nov 8 23:05:54 knummi kernel: [ 0.309363] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.309427] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) 
Nov  8 23:05:54 knummi kernel: [    0.309708] pnp 00:02: [io  0x040b]
Nov  8 23:05:54 knummi kernel: [    0.309709] pnp 00:02: [io  0x04d6]
Nov  8 23:05:54 knummi kernel: [    0.309710] pnp 00:02: [io  0x0c00-0x0c01]
Nov  8 23:05:54 knummi kernel: [    0.309712] pnp 00:02: [io  0x0c14]
Nov  8 23:05:54 knummi kernel: [    0.309713] pnp 00:02: [io  0x0c50-0x0c51]
Nov  8 23:05:54 knummi kernel: [    0.309714] pnp 00:02: [io  0x0c52]
Nov  8 23:05:54 knummi kernel: [    0.309715] pnp 00:02: [io  0x0c6c]
Nov  8 23:05:54 knummi kernel: [    0.309716] pnp 00:02: [io  0x0c6f]
Nov  8 23:05:54 knummi kernel: [    0.309717] pnp 00:02: [io  0x0cd0-0x0cd1]
Nov  8 23:05:54 knummi kernel: [    0.309718] pnp 00:02: [io  0x0cd2-0x0cd3]
Nov  8 23:05:54 knummi kernel: [    0.309720] pnp 00:02: [io  0x0cd4-0x0cd5]
Nov  8 23:05:54 knummi kernel: [    0.309721] pnp 00:02: [io  0x0cd6-0x0cd7]
Nov  8 23:05:54 knummi kernel: [    0.309722] pnp 00:02: [io  0x0cd8-0x0cdf]
Nov  8 23:05:54 knummi kernel: [    0.309723] pnp 00:02: [io  0x0800-0x089f]
Nov 8 23:05:54 knummi kernel: [ 0.309725] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] 
Nov  8 23:05:54 knummi kernel: [    0.309726] pnp 00:02: [io  0x0000-0x000f]
Nov  8 23:05:54 knummi kernel: [    0.309727] pnp 00:02: [io  0x0b20-0x0b3f]
Nov  8 23:05:54 knummi kernel: [    0.309728] pnp 00:02: [io  0x0900-0x090f]
Nov  8 23:05:54 knummi kernel: [    0.309730] pnp 00:02: [io  0x0910-0x091f]
Nov  8 23:05:54 knummi kernel: [    0.309731] pnp 00:02: [io  0xfe00-0xfefe]
Nov 8 23:05:54 knummi kernel: [ 0.309732] pnp 00:02: [io 0x0060-0x005f disabled] Nov 8 23:05:54 knummi kernel: [ 0.309734] pnp 00:02: [io 0x0064-0x0063 disabled] Nov 8 23:05:54 knummi kernel: [ 0.309735] pnp 00:02: [mem 0xfec00000-0xfec00fff] Nov 8 23:05:54 knummi kernel: [ 0.309736] pnp 00:02: [mem 0xfee00000-0xfee00fff] Nov 8 23:05:54 knummi kernel: [ 0.309738] pnp 00:02: [mem 0xfed80000-0xfed8ffff] Nov 8 23:05:54 knummi kernel: [ 0.309740] pnp 00:02: [mem 0xfed61000-0xfed70fff] Nov 8 23:05:54 knummi kernel: [ 0.309742] pnp 00:02: [mem 0xfec10000-0xfec10fff] Nov 8 23:05:54 knummi kernel: [ 0.309743] pnp 00:02: [mem 0xfed00000-0xfed00fff] Nov 8 23:05:54 knummi kernel: [ 0.309745] pnp 00:02: [mem 0xffc00000-0xffffffff] Nov 8 23:05:54 knummi kernel: [ 0.309795] system 00:02: [io 0x040b] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.309855] system 00:02: [io 0x04d6] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.309915] system 00:02: [io 0x0c00-0x0c01] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.309977] system 00:02: [io 0x0c14] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310044] system 00:02: [io 0x0c50-0x0c51] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310105] system 00:02: [io 0x0c52] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310165] system 00:02: [io 0x0c6c] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310225] system 00:02: [io 0x0c6f] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310286] system 00:02: [io 0x0cd0-0x0cd1] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310347] system 00:02: [io 0x0cd2-0x0cd3] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310409] system 00:02: [io 0x0cd4-0x0cd5] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310470] system 00:02: [io 0x0cd6-0x0cd7] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310531] system 00:02: [io 0x0cd8-0x0cdf] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310593] system 00:02: [io 0x0800-0x089f] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310654] system 00:02: [io 0x0b20-0x0b3f] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310716] system 00:02: [io 0x0900-0x090f] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310777] system 00:02: [io 0x0910-0x091f] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310839] system 00:02: [io 0xfe00-0xfefe] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.310900] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved Nov 8 23:05:54 knummi kernel: [ 0.310964] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311032] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311095] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311157] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311222] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311284] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311348] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 8 23:05:54 knummi kernel: [ 0.311413] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] 
Nov  8 23:05:54 knummi kernel: [    0.311415] pnp 00:03: [io  0x0290-0x02af]
Nov 8 23:05:54 knummi kernel: [ 0.311416] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] Nov 8 23:05:54 knummi kernel: [ 0.311443] system 00:03: [io 0x0290-0x02af] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311504] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) 
Nov  8 23:05:54 knummi kernel: [    0.311513] pnp 00:04: [dma 4]
Nov  8 23:05:54 knummi kernel: [    0.311514] pnp 00:04: [io  0x0000-0x000f]
Nov  8 23:05:54 knummi kernel: [    0.311515] pnp 00:04: [io  0x0081-0x0083]
Nov  8 23:05:54 knummi kernel: [    0.311517] pnp 00:04: [io  0x0087]
Nov  8 23:05:54 knummi kernel: [    0.311518] pnp 00:04: [io  0x0089-0x008b]
Nov  8 23:05:54 knummi kernel: [    0.311519] pnp 00:04: [io  0x008f]
Nov  8 23:05:54 knummi kernel: [    0.311520] pnp 00:04: [io  0x00c0-0x00df]
Nov 8 23:05:54 knummi kernel: [ 0.311534] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) 
Nov  8 23:05:54 knummi kernel: [    0.311540] pnp 00:05: [io  0x0070-0x0071]
Nov  8 23:05:54 knummi kernel: [    0.311546] pnp 00:05: [irq 8]
Nov 8 23:05:54 knummi kernel: [ 0.311560] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) 
Nov  8 23:05:54 knummi kernel: [    0.311564] pnp 00:06: [io  0x0061]
Nov 8 23:05:54 knummi kernel: [ 0.311577] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) 
Nov  8 23:05:54 knummi kernel: [    0.311590] pnp 00:07: [io  0x0010-0x001f]
Nov  8 23:05:54 knummi kernel: [    0.311591] pnp 00:07: [io  0x0022-0x003f]
Nov  8 23:05:54 knummi kernel: [    0.311592] pnp 00:07: [io  0x0044-0x005f]
Nov  8 23:05:54 knummi kernel: [    0.311593] pnp 00:07: [io  0x0062-0x0063]
Nov  8 23:05:54 knummi kernel: [    0.311594] pnp 00:07: [io  0x0065-0x006f]
Nov  8 23:05:54 knummi kernel: [    0.311596] pnp 00:07: [io  0x0072-0x007f]
Nov  8 23:05:54 knummi kernel: [    0.311597] pnp 00:07: [io  0x0080]
Nov  8 23:05:54 knummi kernel: [    0.311598] pnp 00:07: [io  0x0084-0x0086]
Nov  8 23:05:54 knummi kernel: [    0.311599] pnp 00:07: [io  0x0088]
Nov  8 23:05:54 knummi kernel: [    0.311600] pnp 00:07: [io  0x008c-0x008e]
Nov  8 23:05:54 knummi kernel: [    0.311601] pnp 00:07: [io  0x0090-0x009f]
Nov  8 23:05:54 knummi kernel: [    0.311603] pnp 00:07: [io  0x00a2-0x00bf]
Nov  8 23:05:54 knummi kernel: [    0.311604] pnp 00:07: [io  0x00e0-0x00ef]
Nov  8 23:05:54 knummi kernel: [    0.311605] pnp 00:07: [io  0x04d0-0x04d1]
Nov 8 23:05:54 knummi kernel: [ 0.311639] system 00:07: [io 0x04d0-0x04d1] has been reserved Nov 8 23:05:54 knummi kernel: [ 0.311701] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) 
Nov  8 23:05:54 knummi kernel: [    0.311706] pnp 00:08: [io  0x00f0-0x00ff]
Nov  8 23:05:54 knummi kernel: [    0.311709] pnp 00:08: [irq 13]
Nov 8 23:05:54 knummi kernel: [ 0.311723] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) Nov 8 23:05:54 knummi kernel: [ 0.311755] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) 
Nov  8 23:05:54 knummi kernel: [    0.311767] pnp 00:0a: [io  0x0060]
Nov  8 23:05:54 knummi kernel: [    0.311769] pnp 00:0a: [io  0x0064]
Nov  8 23:05:54 knummi kernel: [    0.311771] pnp 00:0a: [irq 1]
Nov 8 23:05:54 knummi kernel: [ 0.311790] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Nov 8 23:05:54 knummi kernel: [ 0.311860] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] Nov 8 23:05:54 knummi kernel: [ 0.311891] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 8 23:05:54 knummi kernel: [ 0.311940] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled] Nov 8 23:05:54 knummi kernel: [ 0.311942] pnp 00:0c: [mem 0xfec20000-0xfec200ff] Nov 8 23:05:54 knummi kernel: [ 0.311973] system 00:0c: [mem 0xfec20000-0xfec200ff] could not be reserved Nov 8 23:05:54 knummi kernel: [ 0.312043] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) Nov 8 23:05:54 knummi kernel: [ 0.312127] pnp 00:0d: [mem 0xfed00000-0xfed003ff] Nov 8 23:05:54 knummi kernel: [ 0.312152] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active) 
Nov  8 23:05:54 knummi kernel: [    0.312156] pnp: PnP ACPI: found 14 devices
Nov 8 23:05:54 knummi kernel: [ 0.312214] ACPI: ACPI bus type pnp unregistered Nov 8 23:05:54 knummi kernel: [ 0.318596] pci 0000:05:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] Nov 8 23:05:54 knummi kernel: [ 0.318678] PCI: max bus depth: 1 pci_try_num: 2 Nov 8 23:05:54 knummi kernel: [ 0.318699] pci 0000:00:06.0: BAR 15: assigned [mem 0xda000000-0xda0fffff pref] Nov 8 23:05:54 knummi kernel: [ 0.318777] pci 0000:00:0a.0: BAR 15: assigned [mem 0xda200000-0xda2fffff pref] Nov 8 23:05:54 knummi kernel: [ 0.318855] pci 0000:00:02.0: PCI bridge to [bus 01-01] Nov 8 23:05:54 knummi kernel: [ 0.318916] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] Nov 8 23:05:54 knummi kernel: [ 0.318978] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff] Nov 8 23:05:54 knummi kernel: [ 0.319047] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xd9ffffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.319126] pci 0000:00:04.0: PCI bridge to [bus 02-02] Nov 8 23:05:54 knummi kernel: [ 0.319187] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff] Nov 8 23:05:54 knummi kernel: [ 0.319250] pci 0000:00:04.0: bridge window [mem 0xda100000-0xda1fffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.319330] pci 0000:03:00.0: BAR 6: assigned [mem 0xda000000-0xda00ffff pref] Nov 8 23:05:54 knummi kernel: [ 0.319407] pci 0000:00:06.0: PCI bridge to [bus 03-03] Nov 8 23:05:54 knummi kernel: [ 0.319467] pci 0000:00:06.0: bridge window [io 0xc000-0xcfff] Nov 8 23:05:54 knummi kernel: [ 0.319529] pci 0000:00:06.0: bridge window [mem 0xfe400000-0xfe4fffff] Nov 8 23:05:54 knummi kernel: [ 0.319593] pci 0000:00:06.0: bridge window [mem 0xda000000-0xda0fffff pref] Nov 8 23:05:54 knummi kernel: [ 0.319671] pci 0000:00:07.0: PCI bridge to [bus 04-04] Nov 8 23:05:54 knummi kernel: [ 0.319732] pci 0000:00:07.0: bridge window [mem 0xfe300000-0xfe3fffff] Nov 8 23:05:54 knummi kernel: [ 0.319797] pci 0000:05:00.0: BAR 6: assigned [mem 0xda200000-0xda21ffff pref] Nov 8 23:05:54 knummi kernel: [ 0.319874] pci 0000:00:0a.0: PCI bridge to [bus 05-05] Nov 8 23:05:54 knummi kernel: [ 0.319934] pci 0000:00:0a.0: bridge window [io 0xb000-0xbfff] Nov 8 23:05:54 knummi kernel: [ 0.319997] pci 0000:00:0a.0: bridge window [mem 0xfe200000-0xfe2fffff] Nov 8 23:05:54 knummi kernel: [ 0.320065] pci 0000:00:0a.0: bridge window [mem 0xda200000-0xda2fffff pref] Nov 8 23:05:54 knummi kernel: [ 0.320144] pci 0000:00:14.4: PCI bridge to [bus 06-06] Nov 8 23:05:54 knummi kernel: [ 0.320206] pci 0000:00:14.4: bridge window [mem 0xfe100000-0xfe1fffff] Nov 8 23:05:54 knummi kernel: [ 0.320281] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 Nov 8 23:05:54 knummi kernel: [ 0.320345] pci 0000:00:02.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 0.320349] pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 Nov 8 23:05:54 knummi kernel: [ 0.320412] pci 0000:00:04.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 0.320417] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 Nov 8 23:05:54 knummi kernel: [ 0.320481] pci 0000:00:06.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 0.320484] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 Nov 8 23:05:54 knummi kernel: [ 0.320547] pci 0000:00:07.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 0.320552] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 Nov 8 23:05:54 knummi kernel: [ 0.320615] pci 0000:00:0a.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 0.320620] pci_bus 0000:00: resource 4 [io 0x0000-0x03af] Nov 8 23:05:54 knummi kernel: [ 0.320622] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] Nov 8 23:05:54 knummi kernel: [ 0.320623] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] Nov 8 23:05:54 knummi kernel: [ 0.320625] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] Nov 8 23:05:54 knummi kernel: [ 0.320626] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] Nov 8 23:05:54 knummi kernel: [ 0.320628] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] Nov 8 23:05:54 knummi kernel: [ 0.320629] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff] Nov 8 23:05:54 knummi kernel: [ 0.320631] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] Nov 8 23:05:54 knummi kernel: [ 0.320632] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff] Nov 8 23:05:54 knummi kernel: [ 0.320634] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.320636] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] Nov 8 23:05:54 knummi kernel: [ 0.320637] pci_bus 0000:02: resource 2 [mem 0xda100000-0xda1fffff 64bit pref] Nov 8 23:05:54 knummi kernel: [ 0.320639] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] Nov 8 23:05:54 knummi kernel: [ 0.320640] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff] Nov 8 23:05:54 knummi kernel: [ 0.320642] pci_bus 0000:03: resource 2 [mem 0xda000000-0xda0fffff pref] Nov 8 23:05:54 knummi kernel: [ 0.320644] pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff] Nov 8 23:05:54 knummi kernel: [ 0.320645] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff] Nov 8 23:05:54 knummi kernel: [ 0.320647] pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff] Nov 8 23:05:54 knummi kernel: [ 0.320648] pci_bus 0000:05: resource 2 [mem 0xda200000-0xda2fffff pref] Nov 8 23:05:54 knummi kernel: [ 0.320650] pci_bus 0000:06: resource 1 [mem 0xfe100000-0xfe1fffff] Nov 8 23:05:54 knummi kernel: [ 0.320652] pci_bus 0000:06: resource 4 [io 0x0000-0x03af] Nov 8 23:05:54 knummi kernel: [ 0.320653] pci_bus 0000:06: resource 5 [io 0x03e0-0x0cf7] Nov 8 23:05:54 knummi kernel: [ 0.320655] pci_bus 0000:06: resource 6 [io 0x03b0-0x03df] Nov 8 23:05:54 knummi kernel: [ 0.320656] pci_bus 0000:06: resource 7 [io 0x0d00-0xffff] Nov 8 23:05:54 knummi kernel: [ 0.320657] pci_bus 0000:06: resource 8 [mem 0x000a0000-0x000bffff] Nov 8 23:05:54 knummi kernel: [ 0.320659] pci_bus 0000:06: resource 9 [mem 0x000c0000-0x000dffff] Nov 8 23:05:54 knummi kernel: [ 0.320661] pci_bus 0000:06: resource 10 [mem 0xd0000000-0xffffffff] Nov 8 23:05:54 knummi kernel: [ 0.320682] NET: Registered protocol family 2 Nov 8 23:05:54 knummi kernel: [ 0.320898] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) Nov 8 23:05:54 knummi kernel: [ 0.321942] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) Nov 8 23:05:54 knummi kernel: [ 0.323880] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Nov 8 23:05:54 knummi kernel: [ 0.324178] TCP: Hash tables configured (established 524288 bind 65536) 
Nov  8 23:05:54 knummi kernel: [    0.324241] TCP reno registered
Nov 8 23:05:54 knummi kernel: [ 0.324308] UDP hash table entries: 4096 (order: 5, 131072 bytes) Nov 8 23:05:54 knummi kernel: [ 0.324411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) Nov 8 23:05:54 knummi kernel: [ 0.324565] NET: Registered protocol family 1 Nov 8 23:05:54 knummi kernel: [ 0.408135] pci 0000:01:00.0: Boot video device 
Nov  8 23:05:54 knummi kernel: [    0.408176] PCI: CLS 64 bytes, default 64
Nov 8 23:05:54 knummi kernel: [ 0.408211] Trying to unpack rootfs image as initramfs... Nov 8 23:05:54 knummi kernel: [ 0.555355] Freeing initrd memory: 11012k freed 
Nov  8 23:05:54 knummi kernel: [    0.559233] PCI-DMA: Disabling AGP.
Nov 8 23:05:54 knummi kernel: [ 0.559357] PCI-DMA: aperture base @ f8000000 size 65536 KB Nov 8 23:05:54 knummi kernel: [ 0.559418] init_memory_mapping: 00000000f8000000-00000000fc000000 
Nov  8 23:05:54 knummi kernel: [    0.559480]  00f8000000 - 00fc000000 page 2M
Nov  8 23:05:54 knummi kernel: [    0.559484] PCI-DMA: using GART IOMMU.
Nov 8 23:05:54 knummi kernel: [ 0.559542] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Nov 8 23:05:54 knummi kernel: [ 0.562673] audit: initializing netlink socket (disabled) Nov 8 23:05:54 knummi kernel: [ 0.562747] type=2000 audit(1320786340.561:1): initialized Nov 8 23:05:54 knummi kernel: [ 0.592518] HugeTLB registered 2 MB page size, pre-allocated 0 pages 
Nov  8 23:05:54 knummi kernel: [    0.627654] VFS: Disk quotas dquot_6.5.2
Nov 8 23:05:54 knummi kernel: [ 0.627760] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 
Nov  8 23:05:54 knummi kernel: [    0.628431] fuse init (API version 7.17)
Nov  8 23:05:54 knummi kernel: [    0.628573] msgmni has been set to 16024
Nov 8 23:05:54 knummi kernel: [ 0.628830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) 
Nov  8 23:05:54 knummi kernel: [    0.628908] io scheduler noop registered
Nov  8 23:05:54 knummi kernel: [    0.630183] io scheduler deadline registered
Nov 8 23:05:54 knummi kernel: [ 0.630275] io scheduler cfq registered (default) Nov 8 23:05:54 knummi kernel: [ 0.630709] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Nov 8 23:05:54 knummi kernel: [ 0.630781] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Nov 8 23:05:54 knummi kernel: [ 0.630941] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 
Nov  8 23:05:54 knummi kernel: [    0.631044] ACPI: Power Button [PWRB]
Nov 8 23:05:54 knummi kernel: [ 0.631123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 
Nov  8 23:05:54 knummi kernel: [    0.631201] ACPI: Power Button [PWRF]
Nov 8 23:05:54 knummi kernel: [ 0.631371] ACPI: acpi_idle registered with cpuidle Nov 8 23:05:54 knummi kernel: [ 0.631394] ACPI: processor limited to max C-state 1 
Nov  8 23:05:54 knummi kernel: [    0.677472] ERST: Table is not found!
Nov 8 23:05:54 knummi kernel: [ 0.677590] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled 
Nov  8 23:05:54 knummi kernel: [    0.679298] Linux agpgart interface v0.103
Nov  8 23:05:54 knummi kernel: [    0.680123] brd: module loaded
Nov  8 23:05:54 knummi kernel: [    0.680571] loop: module loaded
Nov  8 23:05:54 knummi kernel: [    0.680783] ahci 0000:00:11.0: version 3.0
Nov 8 23:05:54 knummi kernel: [ 0.680799] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Nov 8 23:05:54 knummi kernel: [ 0.680957] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode Nov 8 23:05:54 knummi kernel: [ 0.681059] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
Nov  8 23:05:54 knummi kernel: [    0.681601] scsi0 : ahci
Nov  8 23:05:54 knummi kernel: [    0.681720] scsi1 : ahci
Nov  8 23:05:54 knummi kernel: [    0.681819] scsi2 : ahci
Nov  8 23:05:54 knummi kernel: [    0.681920] scsi3 : ahci
Nov  8 23:05:54 knummi kernel: [    0.682035] scsi4 : ahci
Nov  8 23:05:54 knummi kernel: [    0.682136] scsi5 : ahci
Nov 8 23:05:54 knummi kernel: [ 0.682368] ata1: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b100 irq 19 Nov 8 23:05:54 knummi kernel: [ 0.682447] ata2: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b180 irq 19 Nov 8 23:05:54 knummi kernel: [ 0.682525] ata3: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b200 irq 19 Nov 8 23:05:54 knummi kernel: [ 0.682603] ata4: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b280 irq 19 Nov 8 23:05:54 knummi kernel: [ 0.682681] ata5: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b300 irq 19 Nov 8 23:05:54 knummi kernel: [ 0.682759] ata6: SATA max UDMA/133 abar m1024@0xfe50b000 port 0xfe50b380 irq 19 Nov 8 23:05:54 knummi kernel: [ 0.682945] ahci 0000:03:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 Nov 8 23:05:54 knummi kernel: [ 0.683109] ahci 0000:03:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode Nov 8 23:05:54 knummi kernel: [ 0.683197] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part Nov 8 23:05:54 knummi kernel: [ 0.683263] ahci 0000:03:00.0: setting latency timer to 64 
Nov  8 23:05:54 knummi kernel: [    0.683438] scsi6 : ahci
Nov  8 23:05:54 knummi kernel: [    0.683536] scsi7 : ahci
Nov 8 23:05:54 knummi kernel: [ 0.683631] ata7: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410100 irq 51 Nov 8 23:05:54 knummi kernel: [ 0.683709] ata8: SATA max UDMA/133 abar m512@0xfe410000 port 0xfe410180 irq 51 
Nov  8 23:05:54 knummi kernel: [    0.683967] Fixed MDIO Bus: probed
Nov  8 23:05:54 knummi kernel: [    0.684064] PPP generic driver version 2.4.2
Nov 8 23:05:54 knummi kernel: [ 0.684157] tun: Universal TUN/TAP device driver, 1.6 Nov 8 23:05:54 knummi kernel: [ 0.684216] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> Nov 8 23:05:54 knummi kernel: [ 0.684338] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 Nov 8 23:05:54 knummi kernel: [ 0.684400] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp Nov 8 23:05:54 knummi kernel: [ 0.684586] serio: i8042 KBD port at 0x60,0x64 irq 1 Nov 8 23:05:54 knummi kernel: [ 0.684706] mousedev: PS/2 mouse device common for all mice Nov 8 23:05:54 knummi kernel: [ 0.684854] rtc_cmos 00:05: RTC can wake from S4 Nov 8 23:05:54 knummi kernel: [ 0.684977] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 Nov 8 23:05:54 knummi kernel: [ 0.685078] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Nov 8 23:05:54 knummi kernel: [ 0.685146] md: raid1 personality registered for level 1 Nov 8 23:05:54 knummi kernel: [ 0.685284] device-mapper: uevent: version 1.0.3 Nov 8 23:05:54 knummi kernel: [ 0.685400] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx Nov 8 23:05:54 knummi kernel: [ 0.685549] device-mapper: multipath: version 1.3.0 loaded Nov 8 23:05:54 knummi kernel: [ 0.685611] device-mapper: multipath round-robin: version 1.0.0 loaded 
Nov  8 23:05:54 knummi kernel: [    0.685747] cpuidle: using governor ladder
Nov  8 23:05:54 knummi kernel: [    0.685805] cpuidle: using governor menu
Nov 8 23:05:54 knummi kernel: [ 0.685863] EFI Variables Facility v0.08 2004-May-17 
Nov  8 23:05:54 knummi kernel: [    0.686063] TCP cubic registered
Nov 8 23:05:54 knummi kernel: [ 0.686236] NET: Registered protocol family 10 Nov 8 23:05:54 knummi kernel: [ 0.686578] NET: Registered protocol family 17 Nov 8 23:05:54 knummi kernel: [ 0.686644] Registering the dns_resolver key type Nov 8 23:05:54 knummi kernel: [ 0.686802] PM: Hibernation image not present or could not be loaded. 
Nov  8 23:05:54 knummi kernel: [    0.686810] registered taskstats version 1
Nov  8 23:05:54 knummi kernel: [    0.703994]   Magic number: 3:373:95
Nov 8 23:05:54 knummi kernel: [ 0.704150] rtc_cmos 00:05: setting system clock to 2011-11-08 21:05:42 UTC (1320786342) Nov 8 23:05:54 knummi kernel: [ 0.704241] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00) Nov 8 23:05:54 knummi kernel: [ 0.704359] powernow-k8: 0 : pstate 0 (3400 MHz) Nov 8 23:05:54 knummi kernel: [ 0.704418] powernow-k8: 1 : pstate 1 (2700 MHz) Nov 8 23:05:54 knummi kernel: [ 0.704477] powernow-k8: 2 : pstate 2 (2200 MHz) Nov 8 23:05:54 knummi kernel: [ 0.704536] powernow-k8: 3 : pstate 3 (800 MHz) Nov 8 23:05:54 knummi kernel: [ 0.704864] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 
Nov  8 23:05:54 knummi kernel: [    0.704927] EDD information not available.
Nov 8 23:05:54 knummi kernel: [ 0.716127] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 Nov 8 23:05:54 knummi kernel: [ 0.988095] ata5: SATA link down (SStatus 0 SControl 300) Nov 8 23:05:54 knummi kernel: [ 0.988190] ata7: SATA link down (SStatus 0 SControl 300) Nov 8 23:05:54 knummi kernel: [ 0.988281] ata8: SATA link down (SStatus 0 SControl 300) Nov 8 23:05:54 knummi kernel: [ 1.142072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 8 23:05:54 knummi kernel: [ 1.142151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 8 23:05:54 knummi kernel: [ 1.142225] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 8 23:05:54 knummi kernel: [ 1.142874] ata2.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 Nov 8 23:05:54 knummi kernel: [ 1.142938] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Nov 8 23:05:54 knummi kernel: [ 1.143060] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 23:05:54 knummi kernel: [ 1.143214] ata3.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 Nov 8 23:05:54 knummi kernel: [ 1.143278] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA 
Nov  8 23:05:54 knummi kernel: [    1.144907] ata2.00: configured for UDMA/133
Nov  8 23:05:54 knummi kernel: [    1.145062] ata3.00: configured for UDMA/133
Nov 8 23:05:54 knummi kernel: [ 1.179642] ata1.00: ATA-7: ST3160812AS, 3.AAE, max UDMA/133 Nov 8 23:05:54 knummi kernel: [ 1.179704] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) Nov 8 23:05:54 knummi kernel: [ 1.188892] ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133 Nov 8 23:05:54 knummi kernel: [ 1.188954] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) 
Nov  8 23:05:54 knummi kernel: [    1.238000] ata1.00: configured for UDMA/133
Nov 8 23:05:54 knummi kernel: [ 1.238200] scsi 0:0:0:0: Direct-Access ATA ST3160812AS 3.AA PQ: 0 ANSI: 5 Nov 8 23:05:54 knummi kernel: [ 1.238374] sd 0:0:0:0: Attached scsi generic sg0 type 0 Nov 8 23:05:54 knummi kernel: [ 1.238485] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) Nov 8 23:05:54 knummi kernel: [ 1.238584] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 Nov 8 23:05:54 knummi kernel: [ 1.238681] sd 0:0:0:0: [sda] Write Protect is off Nov 8 23:05:54 knummi kernel: [ 1.238746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 8 23:05:54 knummi kernel: [ 1.238767] sd 1:0:0:0: Attached scsi generic sg1 type 0 Nov 8 23:05:54 knummi kernel: [ 1.238782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 8 23:05:54 knummi kernel: [ 1.238816] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Nov 8 23:05:54 knummi kernel: [ 1.238935] sd 1:0:0:0: [sdb] Write Protect is off Nov 8 23:05:54 knummi kernel: [ 1.238937] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Nov 8 23:05:54 knummi kernel: [ 1.239025] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 8 23:05:54 knummi kernel: [ 1.239284] scsi 2:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 Nov 8 23:05:54 knummi kernel: [ 1.239453] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Nov 8 23:05:54 knummi kernel: [ 1.239463] sd 2:0:0:0: Attached scsi generic sg2 type 0 Nov 8 23:05:54 knummi kernel: [ 1.239656] sd 2:0:0:0: [sdc] Write Protect is off Nov 8 23:05:54 knummi kernel: [ 1.239716] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Nov 8 23:05:54 knummi kernel: [ 1.239743] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
Nov  8 23:05:54 knummi kernel: [    1.247198] ata4.00: configured for UDMA/133
Nov 8 23:05:54 knummi kernel: [ 1.247321] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Nov 8 23:05:54 knummi kernel: [ 1.247474] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) Nov 8 23:05:54 knummi kernel: [ 1.247505] sd 3:0:0:0: Attached scsi generic sg3 type 0 
Nov  8 23:05:54 knummi kernel: [    1.247649]  sdb: sdb1 sdb2 sdb3
Nov 8 23:05:54 knummi kernel: [ 1.247663] sd 3:0:0:0: [sdd] Write Protect is off Nov 8 23:05:54 knummi kernel: [ 1.247664] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Nov 8 23:05:54 knummi kernel: [ 1.247674] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 8 23:05:54 knummi kernel: [ 1.248159] sd 1:0:0:0: [sdb] Attached SCSI disk 
Nov  8 23:05:54 knummi kernel: [    1.253332]  sdc: sdc1 sdc2 sdc3
Nov 8 23:05:54 knummi kernel: [ 1.253668] sd 2:0:0:0: [sdc] Attached SCSI disk 
Nov  8 23:05:54 knummi kernel: [    1.277633]  sda: sda1
Nov 8 23:05:54 knummi kernel: [ 1.277929] sd 0:0:0:0: [sda] Attached SCSI disk 
Nov  8 23:05:54 knummi kernel: [    1.307767]  sdd: sdd1 sdd2
Nov 8 23:05:54 knummi kernel: [ 1.307997] sd 3:0:0:0: [sdd] Attached SCSI disk Nov 8 23:05:54 knummi kernel: [ 1.564073] Refined TSC clocksource calibration: 3411.430 MHz. 
Nov  8 23:05:54 knummi kernel: [    1.564141] Switching to clocksource tsc
Nov 8 23:05:54 knummi kernel: [ 1.704072] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Nov 8 23:05:54 knummi kernel: [ 1.710033] ata6.00: ATAPI: _NEC DVD_RW ND-1300A, 1.0C, max UDMA/33 
Nov  8 23:05:54 knummi kernel: [    1.710096] ata6.00: applying bridge limits
Nov  8 23:05:54 knummi kernel: [    1.716279] ata6.00: configured for UDMA/33
Nov 8 23:05:54 knummi kernel: [ 1.720525] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-1300A 1.0C PQ: 0 ANSI: 5 Nov 8 23:05:54 knummi kernel: [ 1.723254] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Nov 8 23:05:54 knummi kernel: [ 1.723318] cdrom: Uniform CD-ROM driver Revision: 3.20 Nov 8 23:05:54 knummi kernel: [ 1.723456] sr 5:0:0:0: Attached scsi CD-ROM sr0 Nov 8 23:05:54 knummi kernel: [ 1.723508] sr 5:0:0:0: Attached scsi generic sg4 type 5 Nov 8 23:05:54 knummi kernel: [ 1.724609] Freeing unused kernel memory: 952k freed Nov 8 23:05:54 knummi kernel: [ 1.724838] Write protecting the kernel read-only data: 10240k Nov 8 23:05:54 knummi kernel: [ 1.725748] Freeing unused kernel memory: 352k freed Nov 8 23:05:54 knummi kernel: [ 1.729051] Freeing unused kernel memory: 1520k freed 
Nov  8 23:05:54 knummi kernel: [    1.740766] udev[118]: starting version 163
Nov 8 23:05:54 knummi kernel: [ 1.753413] usbcore: registered new interface driver usbfs Nov 8 23:05:54 knummi kernel: [ 1.753486] usbcore: registered new interface driver hub Nov 8 23:05:54 knummi kernel: [ 1.761229] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Nov 8 23:05:54 knummi kernel: [ 1.761315] r8169 0000:02:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 Nov 8 23:05:54 knummi kernel: [ 1.761416] r8169 0000:02:00.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 1.761466] r8169 0000:02:00.0: irq 72 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.761762] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c6e000, 14:da:e9:52:13:d3, XID 0c900800 IRQ 72 Nov 8 23:05:54 knummi kernel: [ 1.762749] usbcore: registered new device driver usb Nov 8 23:05:54 knummi kernel: [ 1.763442] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Nov 8 23:05:54 knummi kernel: [ 1.763506] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 Nov 8 23:05:54 knummi kernel: [ 1.763604] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Nov 8 23:05:54 knummi kernel: [ 1.763685] ehci_hcd 0000:00:12.2: EHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.763820] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 Nov 8 23:05:54 knummi kernel: [ 1.763904] ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 Nov 8 23:05:54 knummi kernel: [ 1.763907] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 Nov 8 23:05:54 knummi kernel: [ 1.763929] ehci_hcd 0000:00:12.2: debug port 1 Nov 8 23:05:54 knummi kernel: [ 1.763991] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Nov 8 23:05:54 knummi kernel: [ 1.763998] ehci_hcd 0000:00:12.2: MWI active Nov 8 23:05:54 knummi kernel: [ 1.763999] ehci_hcd 0000:00:12.2: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.764096] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe509000 Nov 8 23:05:54 knummi kernel: [ 1.764338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Nov 8 23:05:54 knummi kernel: [ 1.764339] ohci_hcd: block sizes: ed 80 td 96 Nov 8 23:05:54 knummi kernel: [ 1.765429] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Nov 8 23:05:54 knummi kernel: [ 1.765435] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN Nov 8 23:05:54 knummi kernel: [ 1.766367] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Nov 8 23:05:54 knummi kernel: [ 1.766445] r8169 0000:05:00.0: PCI INT A -> GSI 47 (level, low) -> IRQ 47 Nov 8 23:05:54 knummi kernel: [ 1.766531] r8169 0000:05:00.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 1.766578] r8169 0000:05:00.0: irq 73 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.767857] r8169 0000:05:00.0: eth1: RTL8168b/8111b at 0xffffc90000c6c000, 00:25:86:e0:32:a7, XID 18000000 IRQ 73 Nov 8 23:05:54 knummi kernel: [ 1.768283] [drm] Initialized drm 1.1.0 20060810 Nov 8 23:05:54 knummi kernel: [ 1.773093] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 Nov 8 23:05:54 knummi kernel: [ 1.773179] usb usb1: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 1.773184] usb usb1: udev 1, busnum 1, minor = 0 Nov 8 23:05:54 knummi kernel: [ 1.773185] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Nov 8 23:05:54 knummi kernel: [ 1.773248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 1.773326] usb usb1: Product: EHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.773385] usb usb1: Manufacturer: Linux 3.1.0-tmo5 ehci_hcd Nov 8 23:05:54 knummi kernel: [ 1.773445] usb usb1: SerialNumber: 0000:00:12.2 
Nov  8 23:05:54 knummi kernel: [    1.773558] usb usb1: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 1.773560] usb usb1: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 1.773566] usb usb1: adding 1-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    1.773626] hub 1-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 1.773628] hub 1-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    1.773629] hub 1-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.773689] hub 1-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    1.773815] hub 1-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 1.773816] hub 1-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 1.773818] hub 1-0:1.0: individual port over-current protection Nov 8 23:05:54 knummi kernel: [ 1.773819] hub 1-0:1.0: power on to power good time: 20ms Nov 8 23:05:54 knummi kernel: [ 1.773823] hub 1-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 1.773824] hub 1-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 1.775533] nouveau 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 Nov 8 23:05:54 knummi kernel: [ 1.775601] nouveau 0000:01:00.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 1.776564] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1080a1) Nov 8 23:05:54 knummi kernel: [ 1.779207] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Nov 8 23:05:54 knummi kernel: [ 1.779277] ehci_hcd 0000:00:13.2: EHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.779340] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 Nov 8 23:05:54 knummi kernel: [ 1.779424] ehci_hcd 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 Nov 8 23:05:54 knummi kernel: [ 1.779428] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 Nov 8 23:05:54 knummi kernel: [ 1.779448] ehci_hcd 0000:00:13.2: debug port 1 Nov 8 23:05:54 knummi kernel: [ 1.779509] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Nov 8 23:05:54 knummi kernel: [ 1.779516] ehci_hcd 0000:00:13.2: MWI active Nov 8 23:05:54 knummi kernel: [ 1.779517] ehci_hcd 0000:00:13.2: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.779528] ehci_hcd 0000:00:13.2: irq 21, io mem 0xfe507000 Nov 8 23:05:54 knummi kernel: [ 1.779591] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Nov 8 23:05:54 knummi kernel: [ 1.779596] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN Nov 8 23:05:54 knummi kernel: [ 1.779926] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN Nov 8 23:05:54 knummi kernel: [ 1.845727] [drm] nouveau 0000:01:00.0: ... appears to be valid Nov 8 23:05:54 knummi kernel: [ 1.845789] [drm] nouveau 0000:01:00.0: BIT BIOS found Nov 8 23:05:54 knummi kernel: [ 1.845853] [drm] nouveau 0000:01:00.0: Bios version 70.08.29.00 Nov 8 23:05:54 knummi kernel: [ 1.845915] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 Nov 8 23:05:54 knummi kernel: [ 1.845978] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 Nov 8 23:05:54 knummi kernel: [ 1.846060] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000302 00020030 Nov 8 23:05:54 knummi kernel: [ 1.846124] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000300 00000000 Nov 8 23:05:54 knummi kernel: [ 1.846186] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 08011392 00020020 Nov 8 23:05:54 knummi kernel: [ 1.846249] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04022310 00000000 Nov 8 23:05:54 knummi kernel: [ 1.846313] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 Nov 8 23:05:54 knummi kernel: [ 1.846379] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 Nov 8 23:05:54 knummi kernel: [ 1.846457] [drm] nouveau 0000:01:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08 Nov 8 23:05:54 knummi kernel: [ 1.846536] [drm] nouveau 0000:01:00.0: 2: 0x00000200: type 0x00 idx 2 tag 0xff Nov 8 23:05:54 knummi kernel: [ 1.846616] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x6BB6 Nov 8 23:05:54 knummi kernel: [ 1.866851] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x71FC Nov 8 23:05:54 knummi kernel: [ 1.873977] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x8391 Nov 8 23:05:54 knummi kernel: [ 1.874057] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x8395 Nov 8 23:05:54 knummi kernel: [ 1.874179] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x847D Nov 8 23:05:54 knummi kernel: [ 1.874257] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0x84E2 Nov 8 23:05:54 knummi kernel: [ 1.894337] [drm] nouveau 0000:01:00.0: 0x6B29: Condition still not met after 20ms, skipping following opcodes Nov 8 23:05:54 knummi kernel: [ 1.894445] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 Nov 8 23:05:54 knummi kernel: [ 1.894524] usb usb2: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 1.894528] usb usb2: udev 1, busnum 2, minor = 128 Nov 8 23:05:54 knummi kernel: [ 1.894529] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Nov 8 23:05:54 knummi kernel: [ 1.894593] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 1.894670] usb usb2: Product: EHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.894730] usb usb2: Manufacturer: Linux 3.1.0-tmo5 ehci_hcd Nov 8 23:05:54 knummi kernel: [ 1.894790] usb usb2: SerialNumber: 0000:00:13.2 Nov 8 23:05:54 knummi kernel: [ 1.894872] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 50 (level, low) -> IRQ 50 
Nov  8 23:05:54 knummi kernel: [    1.894966] usb usb2: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 1.894968] usb usb2: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 1.894973] usb usb2: adding 2-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    1.894985] hub 2-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 1.894987] hub 2-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    1.894988] hub 2-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.895056] hub 2-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    1.895113] hub 2-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 1.895114] hub 2-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 1.895116] hub 2-0:1.0: individual port over-current protection Nov 8 23:05:54 knummi kernel: [ 1.895117] hub 2-0:1.0: power on to power good time: 20ms Nov 8 23:05:54 knummi kernel: [ 1.895120] hub 2-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 1.895121] hub 2-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 1.900019] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23 Nov 8 23:05:54 knummi kernel: [ 1.900097] ehci_hcd 0000:00:16.2: EHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.900159] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 Nov 8 23:05:54 knummi kernel: [ 1.900241] ehci_hcd 0000:00:16.2: reset hcs_params 0x101404 dbg=1 cc=1 pcc=4 ordered !ppc ports=4 Nov 8 23:05:54 knummi kernel: [ 1.900244] ehci_hcd 0000:00:16.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 Nov 8 23:05:54 knummi kernel: [ 1.900261] ehci_hcd 0000:00:16.2: debug port 1 Nov 8 23:05:54 knummi kernel: [ 1.900321] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Nov 8 23:05:54 knummi kernel: [ 1.900327] ehci_hcd 0000:00:16.2: MWI active Nov 8 23:05:54 knummi kernel: [ 1.900329] ehci_hcd 0000:00:16.2: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.900338] ehci_hcd 0000:00:16.2: irq 23, io mem 0xfe504000 Nov 8 23:05:54 knummi kernel: [ 1.900401] ehci_hcd 0000:00:16.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Nov 8 23:05:54 knummi kernel: [ 1.900406] ehci_hcd 0000:00:16.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN Nov 8 23:05:54 knummi kernel: [ 1.900418] xhci_hcd 0000:04:00.0: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 1.900421] xhci_hcd 0000:04:00.0: xHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.900483] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 Nov 8 23:05:54 knummi kernel: [ 1.904943] xhci_hcd 0000:04:00.0: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.904950] xhci_hcd 0000:04:00.0: irq 50, io mem 0xfe300000 Nov 8 23:05:54 knummi kernel: [ 1.905054] xhci_hcd 0000:04:00.0: irq 74 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.905057] xhci_hcd 0000:04:00.0: irq 75 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.905061] xhci_hcd 0000:04:00.0: irq 76 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.905065] xhci_hcd 0000:04:00.0: irq 77 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.905068] xhci_hcd 0000:04:00.0: irq 78 for MSI/MSI-X Nov 8 23:05:54 knummi kernel: [ 1.905119] usb usb4: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 1.905123] usb usb4: udev 1, busnum 4, minor = 384 Nov 8 23:05:54 knummi kernel: [ 1.905124] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 Nov 8 23:05:54 knummi kernel: [ 1.905187] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 1.905264] usb usb4: Product: xHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.905324] usb usb4: Manufacturer: Linux 3.1.0-tmo5 xhci_hcd Nov 8 23:05:54 knummi kernel: [ 1.905384] usb usb4: SerialNumber: 0000:04:00.0 Nov 8 23:05:54 knummi kernel: [ 1.906009] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 
Nov  8 23:05:54 knummi kernel: [    1.906100] usb usb4: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 1.906102] usb usb4: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 1.906104] xHCI xhci_add_endpoint called for root hub Nov 8 23:05:54 knummi kernel: [ 1.906105] xHCI xhci_check_bandwidth called for root hub Nov 8 23:05:54 knummi kernel: [ 1.906108] usb usb4: adding 4-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    1.906121] hub 4-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 1.906122] hub 4-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    1.906123] hub 4-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.906183] hub 4-0:1.0: 2 ports detected
Nov  8 23:05:54 knummi kernel: [    1.906241] hub 4-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 1.906242] hub 4-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 1.906243] hub 4-0:1.0: individual port over-current protection 
Nov  8 23:05:54 knummi kernel: [    1.906245] hub 4-0:1.0: Single TT
Nov 8 23:05:54 knummi kernel: [ 1.906246] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) Nov 8 23:05:54 knummi kernel: [ 1.906247] hub 4-0:1.0: power on to power good time: 20ms Nov 8 23:05:54 knummi kernel: [ 1.906249] hub 4-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 1.906251] hub 4-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 1.906283] xhci_hcd 0000:04:00.0: xHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.906344] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 Nov 8 23:05:54 knummi kernel: [ 1.906424] xhci_hcd 0000:04:00.0: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.906434] usb usb5: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 1.906436] usb usb5: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 1.906439] usb usb5: udev 1, busnum 5, minor = 512 Nov 8 23:05:54 knummi kernel: [ 1.906440] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003 Nov 8 23:05:54 knummi kernel: [ 1.906503] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 1.906580] usb usb5: Product: xHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.906639] usb usb5: Manufacturer: Linux 3.1.0-tmo5 xhci_hcd Nov 8 23:05:54 knummi kernel: [ 1.906700] usb usb5: SerialNumber: 0000:04:00.0 
Nov  8 23:05:54 knummi kernel: [    1.910029] usb usb5: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 1.910030] usb usb5: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 1.910032] xHCI xhci_add_endpoint called for root hub Nov 8 23:05:54 knummi kernel: [ 1.910033] xHCI xhci_check_bandwidth called for root hub Nov 8 23:05:54 knummi kernel: [ 1.910036] usb usb5: adding 5-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    1.910048] hub 5-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 1.910049] hub 5-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    1.910050] hub 5-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.910110] hub 5-0:1.0: 2 ports detected
Nov  8 23:05:54 knummi kernel: [    1.910168] hub 5-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 1.910169] hub 5-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 1.910170] hub 5-0:1.0: individual port over-current protection Nov 8 23:05:54 knummi kernel: [ 1.910171] hub 5-0:1.0: TT requires at most 8 FS bit times (666 ns) Nov 8 23:05:54 knummi kernel: [ 1.910173] hub 5-0:1.0: power on to power good time: 20ms Nov 8 23:05:54 knummi kernel: [ 1.910175] hub 5-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 1.910176] hub 5-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 1.910206] usb usb3: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 1.910210] usb usb3: udev 1, busnum 3, minor = 256 Nov 8 23:05:54 knummi kernel: [ 1.910211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 Nov 8 23:05:54 knummi kernel: [ 1.910274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 1.910351] usb usb3: Product: EHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.910410] usb usb3: Manufacturer: Linux 3.1.0-tmo5 ehci_hcd Nov 8 23:05:54 knummi kernel: [ 1.910471] usb usb3: SerialNumber: 0000:00:16.2 
Nov  8 23:05:54 knummi kernel: [    1.910571] usb usb3: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 1.910573] usb usb3: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 1.910576] usb usb3: adding 3-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    1.910588] hub 3-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 1.910589] hub 3-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    1.910591] hub 3-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.910649] hub 3-0:1.0: 4 ports detected
Nov  8 23:05:54 knummi kernel: [    1.910707] hub 3-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 1.910708] hub 3-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 1.910709] hub 3-0:1.0: individual port over-current protection Nov 8 23:05:54 knummi kernel: [ 1.910710] hub 3-0:1.0: power on to power good time: 20ms Nov 8 23:05:54 knummi kernel: [ 1.910712] hub 3-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 1.910714] hub 3-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 1.913035] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Nov 8 23:05:54 knummi kernel: [ 1.913110] ohci_hcd 0000:00:12.0: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.913178] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6 
Nov  8 23:05:54 knummi kernel: [    1.913264] QUIRK: Enable AMD PLL fix
Nov 8 23:05:54 knummi kernel: [ 1.913266] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk Nov 8 23:05:54 knummi kernel: [ 1.913277] ohci_hcd 0000:00:12.0: created debug files Nov 8 23:05:54 knummi kernel: [ 1.913278] ohci_hcd 0000:00:12.0: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.913287] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe50a000 Nov 8 23:05:54 knummi kernel: [ 1.968026] ohci_hcd 0000:00:12.0: OHCI controller state Nov 8 23:05:54 knummi kernel: [ 1.968028] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers Nov 8 23:05:54 knummi kernel: [ 1.968031] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 Nov 8 23:05:54 knummi kernel: [ 1.968034] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 Nov 8 23:05:54 knummi kernel: [ 1.968037] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF Nov 8 23:05:54 knummi kernel: [ 1.968040] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH Nov 8 23:05:54 knummi kernel: [ 1.968047] ohci_hcd 0000:00:12.0: hcca frame #0005 Nov 8 23:05:54 knummi kernel: [ 1.968050] ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) Nov 8 23:05:54 knummi kernel: [ 1.968053] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 Nov 8 23:05:54 knummi kernel: [ 1.968055] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE Nov 8 23:05:54 knummi kernel: [ 1.968058] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 1.968061] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 1.968064] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 1.968067] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 1.968070] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 1.968075] usb usb6: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 1.968078] usb usb6: udev 1, busnum 6, minor = 640 Nov 8 23:05:54 knummi kernel: [ 1.968080] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Nov 8 23:05:54 knummi kernel: [ 1.968143] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 1.968220] usb usb6: Product: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.968279] usb usb6: Manufacturer: Linux 3.1.0-tmo5 ohci_hcd Nov 8 23:05:54 knummi kernel: [ 1.968339] usb usb6: SerialNumber: 0000:00:12.0 
Nov  8 23:05:54 knummi kernel: [    1.968451] usb usb6: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 1.968452] usb usb6: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 1.968456] usb usb6: adding 6-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    1.968468] hub 6-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 1.968469] hub 6-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    1.968470] hub 6-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    1.968530] hub 6-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    1.968588] hub 6-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 1.968589] hub 6-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 1.968590] hub 6-0:1.0: no over-current protection Nov 8 23:05:54 knummi kernel: [ 1.968591] hub 6-0:1.0: power on to power good time: 4ms Nov 8 23:05:54 knummi kernel: [ 1.968595] hub 6-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 1.968596] hub 6-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 1.968623] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0 Nov 8 23:05:54 knummi kernel: [ 1.972023] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Nov 8 23:05:54 knummi kernel: [ 1.972092] ohci_hcd 0000:00:13.0: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 1.972154] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7 Nov 8 23:05:54 knummi kernel: [ 1.972234] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk Nov 8 23:05:54 knummi kernel: [ 1.972243] ohci_hcd 0000:00:13.0: created debug files Nov 8 23:05:54 knummi kernel: [ 1.972244] ohci_hcd 0000:00:13.0: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 1.972252] ohci_hcd 0000:00:13.0: irq 20, io mem 0xfe508000 Nov 8 23:05:54 knummi kernel: [ 2.010118] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.010122] hub 4-0:1.0: port 1: status 0101 change 0001 Nov 8 23:05:54 knummi kernel: [ 2.010124] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.010130] hub 4-0:1.0: port 2: status 0101 change 0001 Nov 8 23:05:54 knummi kernel: [ 2.010180] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.010182] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000 
Nov  8 23:05:54 knummi kernel: [    2.015241] md: bind<sdc2>
Nov  8 23:05:54 knummi kernel: [    2.016921] md: bind<sdc3>
Nov  8 23:05:54 knummi kernel: [    2.018425] md: bind<sdc1>
Nov 8 23:05:54 knummi kernel: [ 2.027022] ohci_hcd 0000:00:13.0: OHCI controller state Nov 8 23:05:54 knummi kernel: [ 2.027025] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers Nov 8 23:05:54 knummi kernel: [ 2.027028] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 Nov 8 23:05:54 knummi kernel: [ 2.027031] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 Nov 8 23:05:54 knummi kernel: [ 2.027033] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF Nov 8 23:05:54 knummi kernel: [ 2.027036] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH Nov 8 23:05:54 knummi kernel: [ 2.027043] ohci_hcd 0000:00:13.0: hcca frame #0005 Nov 8 23:05:54 knummi kernel: [ 2.027046] ohci_hcd 0000:00:13.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) Nov 8 23:05:54 knummi kernel: [ 2.027049] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 Nov 8 23:05:54 knummi kernel: [ 2.027051] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE Nov 8 23:05:54 knummi kernel: [ 2.027054] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.027057] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.027060] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.027063] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.027065] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.027073] usb usb7: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 2.027076] usb usb7: udev 1, busnum 7, minor = 768 Nov 8 23:05:54 knummi kernel: [ 2.027077] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 Nov 8 23:05:54 knummi kernel: [ 2.027141] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 2.027219] usb usb7: Product: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 2.027278] usb usb7: Manufacturer: Linux 3.1.0-tmo5 ohci_hcd 
Nov  8 23:05:54 knummi kernel: [    2.027336] md: bind<sdb3>
Nov 8 23:05:54 knummi kernel: [ 2.027396] usb usb7: SerialNumber: 0000:00:13.0 
Nov  8 23:05:54 knummi kernel: [    2.027506] usb usb7: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.027508] usb usb7: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.027511] usb usb7: adding 7-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    2.027522] hub 7-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 2.027523] hub 7-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    2.027524] hub 7-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.027590] hub 7-0:1.0: 5 ports detected
Nov  8 23:05:54 knummi kernel: [    2.027651] hub 7-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 2.027652] hub 7-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 2.027653] hub 7-0:1.0: no over-current protection Nov 8 23:05:54 knummi kernel: [ 2.027654] hub 7-0:1.0: power on to power good time: 4ms Nov 8 23:05:54 knummi kernel: [ 2.027658] hub 7-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 2.027659] hub 7-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 2.027688] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0 Nov 8 23:05:54 knummi kernel: [ 2.028417] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Nov 8 23:05:54 knummi kernel: [ 2.028488] ohci_hcd 0000:00:14.5: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 2.028552] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8 
Nov  8 23:05:54 knummi kernel: [    2.028578] bio: create slab <bio-1> at 1
Nov 8 23:05:54 knummi kernel: [ 2.028617] md/raid1:md2: active with 2 out of 2 mirrors Nov 8 23:05:54 knummi kernel: [ 2.028632] md2: detected capacity change from 0 to 8184070144 Nov 8 23:05:54 knummi kernel: [ 2.028808] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk Nov 8 23:05:54 knummi kernel: [ 2.028822] ohci_hcd 0000:00:14.5: created debug files Nov 8 23:05:54 knummi kernel: [ 2.028823] ohci_hcd 0000:00:14.5: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 2.028826] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe506000 
Nov  8 23:05:54 knummi kernel: [    2.029936] md: bind<sdb1>
Nov 8 23:05:54 knummi kernel: [ 2.031098] md/raid1:md0: active with 2 out of 2 mirrors Nov 8 23:05:54 knummi kernel: [ 2.031210] md0: detected capacity change from 0 to 2006843392 
Nov  8 23:05:54 knummi kernel: [    2.031766]  md2: unknown partition table
Nov  8 23:05:54 knummi kernel: [    2.033700]  md0: unknown partition table
Nov 8 23:05:54 knummi kernel: [ 2.068024] hub 6-0:1.0: state 7 ports 5 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.083023] ohci_hcd 0000:00:14.5: OHCI controller state Nov 8 23:05:54 knummi kernel: [ 2.083025] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers Nov 8 23:05:54 knummi kernel: [ 2.083028] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3 Nov 8 23:05:54 knummi kernel: [ 2.083030] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 Nov 8 23:05:54 knummi kernel: [ 2.083033] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF Nov 8 23:05:54 knummi kernel: [ 2.083036] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH Nov 8 23:05:54 knummi kernel: [ 2.083043] ohci_hcd 0000:00:14.5: hcca frame #0005 Nov 8 23:05:54 knummi kernel: [ 2.083046] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2) Nov 8 23:05:54 knummi kernel: [ 2.083049] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 Nov 8 23:05:54 knummi kernel: [ 2.083051] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE Nov 8 23:05:54 knummi kernel: [ 2.083054] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.083057] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.083061] usb usb8: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 2.083065] usb usb8: udev 1, busnum 8, minor = 896 Nov 8 23:05:54 knummi kernel: [ 2.083066] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 Nov 8 23:05:54 knummi kernel: [ 2.083129] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 2.083206] usb usb8: Product: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 2.083265] usb usb8: Manufacturer: Linux 3.1.0-tmo5 ohci_hcd Nov 8 23:05:54 knummi kernel: [ 2.083326] usb usb8: SerialNumber: 0000:00:14.5 
Nov  8 23:05:54 knummi kernel: [    2.083495] usb usb8: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.083496] usb usb8: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.083499] usb usb8: adding 8-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    2.083510] hub 8-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 2.083511] hub 8-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    2.083512] hub 8-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.083572] hub 8-0:1.0: 2 ports detected
Nov  8 23:05:54 knummi kernel: [    2.083630] hub 8-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 2.083631] hub 8-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 2.083632] hub 8-0:1.0: no over-current protection Nov 8 23:05:54 knummi kernel: [ 2.083633] hub 8-0:1.0: power on to power good time: 4ms Nov 8 23:05:54 knummi kernel: [ 2.083636] hub 8-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 2.083637] hub 8-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 2.086023] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Nov 8 23:05:54 knummi kernel: [ 2.086093] ohci_hcd 0000:00:16.0: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 2.086155] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9 Nov 8 23:05:54 knummi kernel: [ 2.086235] ohci_hcd 0000:00:16.0: enabled AMD prefetch quirk Nov 8 23:05:54 knummi kernel: [ 2.086245] ohci_hcd 0000:00:16.0: created debug files Nov 8 23:05:54 knummi kernel: [ 2.086246] ohci_hcd 0000:00:16.0: supports USB remote wakeup Nov 8 23:05:54 knummi kernel: [ 2.086254] ohci_hcd 0000:00:16.0: irq 22, io mem 0xfe505000 Nov 8 23:05:54 knummi kernel: [ 2.110028] hub 4-0:1.0: state 7 ports 2 chg 0006 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.110037] hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s Nov 8 23:05:54 knummi kernel: [ 2.141045] ohci_hcd 0000:00:16.0: OHCI controller state Nov 8 23:05:54 knummi kernel: [ 2.141047] ohci_hcd 0000:00:16.0: OHCI 1.0, NO legacy support registers Nov 8 23:05:54 knummi kernel: [ 2.141050] ohci_hcd 0000:00:16.0: control 0x283 RWC HCFS=operational CBSR=3 Nov 8 23:05:54 knummi kernel: [ 2.141053] ohci_hcd 0000:00:16.0: cmdstatus 0x00000 SOC=0 Nov 8 23:05:54 knummi kernel: [ 2.141055] ohci_hcd 0000:00:16.0: intrstatus 0x00000004 SF Nov 8 23:05:54 knummi kernel: [ 2.141058] ohci_hcd 0000:00:16.0: intrenable 0x8000005a MIE RHSC UE RD WDH Nov 8 23:05:54 knummi kernel: [ 2.141066] ohci_hcd 0000:00:16.0: hcca frame #0005 Nov 8 23:05:54 knummi kernel: [ 2.141069] ohci_hcd 0000:00:16.0: roothub.a 02001204 POTPGT=2 NOCP NPS NDP=4(4) Nov 8 23:05:54 knummi kernel: [ 2.141071] ohci_hcd 0000:00:16.0: roothub.b 00000000 PPCM=0000 DR=0000 Nov 8 23:05:54 knummi kernel: [ 2.141074] ohci_hcd 0000:00:16.0: roothub.status 00008000 DRWE Nov 8 23:05:54 knummi kernel: [ 2.141077] ohci_hcd 0000:00:16.0: roothub.portstatus [0] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.141080] ohci_hcd 0000:00:16.0: roothub.portstatus [1] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.141082] ohci_hcd 0000:00:16.0: roothub.portstatus [2] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.141085] ohci_hcd 0000:00:16.0: roothub.portstatus [3] 0x00000100 PPS Nov 8 23:05:54 knummi kernel: [ 2.141090] usb usb9: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 2.141093] usb usb9: udev 1, busnum 9, minor = 1024 Nov 8 23:05:54 knummi kernel: [ 2.141095] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 Nov 8 23:05:54 knummi kernel: [ 2.141158] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 8 23:05:54 knummi kernel: [ 2.141235] usb usb9: Product: OHCI Host Controller Nov 8 23:05:54 knummi kernel: [ 2.141294] usb usb9: Manufacturer: Linux 3.1.0-tmo5 ohci_hcd Nov 8 23:05:54 knummi kernel: [ 2.141355] usb usb9: SerialNumber: 0000:00:16.0 
Nov  8 23:05:54 knummi kernel: [    2.141464] usb usb9: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.141466] usb usb9: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.141469] usb usb9: adding 9-0:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    2.141479] hub 9-0:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 2.141481] hub 9-0:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    2.141482] hub 9-0:1.0: USB hub found
Nov  8 23:05:54 knummi kernel: [    2.141542] hub 9-0:1.0: 4 ports detected
Nov  8 23:05:54 knummi kernel: [    2.141599] hub 9-0:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 2.141600] hub 9-0:1.0: no power switching (usb 1.0) Nov 8 23:05:54 knummi kernel: [ 2.141602] hub 9-0:1.0: no over-current protection Nov 8 23:05:54 knummi kernel: [ 2.141603] hub 9-0:1.0: power on to power good time: 4ms Nov 8 23:05:54 knummi kernel: [ 2.141606] hub 9-0:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 2.141607] hub 9-0:1.0: trying to enable port power on non-switchable hub Nov 8 23:05:54 knummi kernel: [ 2.141639] ehci_hcd 0000:00:16.2: HS companion for 0000:00:16.0 Nov 8 23:05:54 knummi kernel: [ 2.143049] [drm] nouveau 0000:01:00.0: 3 available performance level(s) Nov 8 23:05:54 knummi kernel: [ 2.143113] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 50MHz shader 101MHz voltage 880mV timing 0 Nov 8 23:05:54 knummi kernel: [ 2.143195] [drm] nouveau 0000:01:00.0: 1: memory 324MHz core 405MHz shader 810MHz voltage 900mV timing 1 Nov 8 23:05:54 knummi kernel: [ 2.143277] [drm] nouveau 0000:01:00.0: 3: memory 800MHz core 700MHz shader 1400MHz voltage 990mV timing 2 Nov 8 23:05:54 knummi kernel: [ 2.144736] [TTM] Zone kernel: Available graphics memory: 4103680 kiB. Nov 8 23:05:54 knummi kernel: [ 2.144799] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. Nov 8 23:05:54 knummi kernel: [ 2.144861] [TTM] Initializing pool allocator. Nov 8 23:05:54 knummi kernel: [ 2.144925] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM Nov 8 23:05:54 knummi kernel: [ 2.148292] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) Nov 8 23:05:54 knummi kernel: [ 2.151292] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Nov 8 23:05:54 knummi kernel: [ 2.151382] [drm] No driver support for vblank timestamp query. Nov 8 23:05:54 knummi kernel: [ 2.161033] hub 4-0:1.0: port 1 not reset yet, waiting 50ms Nov 8 23:05:54 knummi kernel: [ 2.263034] usb 4-1: new low speed USB device number 2 using xhci_hcd Nov 8 23:05:54 knummi kernel: [ 2.280034] usb 4-1: skipped 1 descriptor after interface Nov 8 23:05:54 knummi kernel: [ 2.280349] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep 
Nov  8 23:05:54 knummi kernel: [    2.280447] usb 4-1: default language 0x0409
Nov 8 23:05:54 knummi kernel: [ 2.281754] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 2.282572] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 2.282677] usb 4-1: udev 2, busnum 4, minor = 385 Nov 8 23:05:54 knummi kernel: [ 2.282679] usb 4-1: New USB device found, idVendor=046d, idProduct=c01b Nov 8 23:05:54 knummi kernel: [ 2.282771] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Nov 8 23:05:54 knummi kernel: [ 2.282867] usb 4-1: Product: USB-PS/2 Optical Mouse 
Nov  8 23:05:54 knummi kernel: [    2.282960] usb 4-1: Manufacturer: Logitech
Nov  8 23:05:54 knummi kernel: [    2.283116] usb 4-1: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.283119] usb 4-1: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.283125] usb 4-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes Nov 8 23:05:54 knummi kernel: [ 2.284083] usb 4-1: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 2.284389] usb 4-1: adding 4-1:1.0 (config #1, interface 0) Nov 8 23:05:54 knummi kernel: [ 2.284429] hub 4-0:1.0: port 2, status 0101, change 0000, 12 Mb/s Nov 8 23:05:54 knummi kernel: [ 2.286078] usbhid 4-1:1.0: usb_probe_interface Nov 8 23:05:54 knummi kernel: [ 2.286080] usbhid 4-1:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    2.288059] md: bind<sdb2>
Nov 8 23:05:54 knummi kernel: [ 2.289070] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-1/4-1:1.0/input/input3 Nov 8 23:05:54 knummi kernel: [ 2.289259] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:04:00.0-1/input0 Nov 8 23:05:54 knummi kernel: [ 2.289393] usbcore: registered new interface driver usbhid 
Nov  8 23:05:54 knummi kernel: [    2.289486] usbhid: USB HID core driver
Nov 8 23:05:54 knummi kernel: [ 2.335025] hub 4-0:1.0: port 2 not reset yet, waiting 50ms Nov 8 23:05:54 knummi kernel: [ 2.341703] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x1a0000, bo ffff88021edc9800 Nov 8 23:05:54 knummi kernel: [ 2.341852] fbcon: nouveaufb (fb0) is primary device Nov 8 23:05:54 knummi kernel: [ 2.382433] Console: switching to colour frame buffer device 240x75 Nov 8 23:05:54 knummi kernel: [ 2.382513] md/raid1:md1: active with 2 out of 2 mirrors Nov 8 23:05:54 knummi kernel: [ 2.382530] md1: detected capacity change from 0 to 990011064320 
Nov  8 23:05:54 knummi kernel: [    2.385164]  md1: unknown partition table
Nov 8 23:05:54 knummi kernel: [ 2.385325] fb0: nouveaufb frame buffer device 
Nov  8 23:05:54 knummi kernel: [    2.385336] drm: registered panic notifier
Nov 8 23:05:54 knummi kernel: [ 2.385349] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 Nov 8 23:05:54 knummi kernel: [ 2.438061] usb 4-2: new high speed USB device number 3 using xhci_hcd Nov 8 23:05:54 knummi kernel: [ 2.452158] usb 4-2: udev 3, busnum 4, minor = 386 Nov 8 23:05:54 knummi kernel: [ 2.452160] usb 4-2: New USB device found, idVendor=04b4, idProduct=6560 Nov 8 23:05:54 knummi kernel: [ 2.452169] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 
Nov  8 23:05:54 knummi kernel: [    2.452221] usb 4-2: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.452223] usb 4-2: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.453077] usb 4-2: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 2.453124] usb 4-2: adding 4-2:1.0 (config #1, interface 0) 
Nov  8 23:05:54 knummi kernel: [    2.453143] hub 4-2:1.0: usb_probe_interface
Nov 8 23:05:54 knummi kernel: [ 2.453145] hub 4-2:1.0: usb_probe_interface - got id 
Nov  8 23:05:54 knummi kernel: [    2.453146] hub 4-2:1.0: USB hub found
Nov 8 23:05:54 knummi kernel: [ 2.453165] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep 
Nov  8 23:05:54 knummi kernel: [    2.453196] hub 4-2:1.0: 4 ports detected
Nov  8 23:05:54 knummi kernel: [    2.453200] hub 4-2:1.0: standalone hub
Nov 8 23:05:54 knummi kernel: [ 2.453202] hub 4-2:1.0: individual port power switching Nov 8 23:05:54 knummi kernel: [ 2.453203] hub 4-2:1.0: individual port over-current protection Nov 8 23:05:54 knummi kernel: [ 2.454306] usb 4-2: Successful Endpoint Configure command 
Nov  8 23:05:54 knummi kernel: [    2.454357] hub 4-2:1.0: TT per port
Nov 8 23:05:54 knummi kernel: [ 2.454359] hub 4-2:1.0: TT requires at most 8 FS bit times (666 ns) Nov 8 23:05:54 knummi kernel: [ 2.454360] hub 4-2:1.0: Port indicators are supported Nov 8 23:05:54 knummi kernel: [ 2.454362] hub 4-2:1.0: power on to power good time: 100ms Nov 8 23:05:54 knummi kernel: [ 2.454712] usb 4-2: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 2.454752] hub 4-2:1.0: local power source is good Nov 8 23:05:54 knummi kernel: [ 2.454754] hub 4-2:1.0: enabling power on all ports Nov 8 23:05:54 knummi kernel: [ 2.454926] hub 7-0:1.0: state 7 ports 5 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.454928] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.454930] hub 9-0:1.0: state 7 ports 4 chg 0000 evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.554054] hub 4-2:1.0: port 1: status 0301 change 0001 Nov 8 23:05:54 knummi kernel: [ 2.554168] hub 4-2:1.0: port 3: status 0101 change 0001 Nov 8 23:05:54 knummi kernel: [ 2.554248] hub 4-2:1.0: port 4: status 0101 change 0001 Nov 8 23:05:54 knummi kernel: [ 2.563566] md: linear personality registered for level -1 Nov 8 23:05:54 knummi kernel: [ 2.564576] md: multipath personality registered for level -4 Nov 8 23:05:54 knummi kernel: [ 2.565611] md: raid0 personality registered for level 0 Nov 8 23:05:54 knummi kernel: [ 2.567535] async_tx: api initialized (async) 
Nov  8 23:05:54 knummi kernel: [    2.584042] raid6: int64x1   2906 MB/s
Nov  8 23:05:54 knummi kernel: [    2.601037] raid6: int64x2   4109 MB/s
Nov  8 23:05:54 knummi kernel: [    2.618040] raid6: int64x4   2984 MB/s
Nov  8 23:05:54 knummi kernel: [    2.635043] raid6: int64x8   2679 MB/s
Nov  8 23:05:54 knummi kernel: [    2.652038] raid6: sse2x1    4714 MB/s
Nov 8 23:05:54 knummi kernel: [ 2.655043] hub 4-2:1.0: state 7 ports 4 chg 001a evt 0000 Nov 8 23:05:54 knummi kernel: [ 2.655079] hub 4-2:1.0: port 1, status 0301, change 0000, 1.5 Mb/s 
Nov  8 23:05:54 knummi kernel: [    2.669026] raid6: sse2x2    7789 MB/s
Nov  8 23:05:54 knummi kernel: [    2.686025] raid6: sse2x4    9007 MB/s
Nov 8 23:05:54 knummi kernel: [ 2.686028] raid6: using algorithm sse2x4 (9007 MB/s) Nov 8 23:05:54 knummi kernel: [ 2.686214] xor: automatically using best checksumming function: generic_sse 
Nov  8 23:05:54 knummi kernel: [    2.691024]    generic_sse: 13932.000 MB/sec
Nov 8 23:05:54 knummi kernel: [ 2.691028] xor: using function: generic_sse (13932.000 MB/sec) Nov 8 23:05:54 knummi kernel: [ 2.691432] md: raid6 personality registered for level 6 Nov 8 23:05:54 knummi kernel: [ 2.691437] md: raid5 personality registered for level 5 Nov 8 23:05:54 knummi kernel: [ 2.691441] md: raid4 personality registered for level 4 Nov 8 23:05:54 knummi kernel: [ 2.694513] md: raid10 personality registered for level 10 Nov 8 23:05:54 knummi kernel: [ 2.718088] usb 4-2.1: new low speed USB device number 4 using xhci_hcd Nov 8 23:05:54 knummi kernel: [ 2.739791] usb 4-2.1: skipped 1 descriptor after interface Nov 8 23:05:54 knummi kernel: [ 2.739794] usb 4-2.1: skipped 1 descriptor after interface Nov 8 23:05:54 knummi kernel: [ 2.740048] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 2.740141] usb 4-2.1: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 2.742099] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 2.742762] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 2.742824] usb 4-2.1: udev 4, busnum 4, minor = 387 Nov 8 23:05:54 knummi kernel: [ 2.742825] usb 4-2.1: New USB device found, idVendor=0111, idProduct=0111 Nov 8 23:05:54 knummi kernel: [ 2.742831] usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Nov 8 23:05:54 knummi kernel: [ 2.742836] usb 4-2.1: Product: PS/2-Cable To USB Converter V:2.2 
Nov  8 23:05:54 knummi kernel: [    2.742840] usb 4-2.1: Manufacturer: 607
Nov  8 23:05:54 knummi kernel: [    2.742922] usb 4-2.1: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.742924] usb 4-2.1: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.742930] usb 4-2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes Nov 8 23:05:54 knummi kernel: [ 2.742939] usb 4-2.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes Nov 8 23:05:54 knummi kernel: [ 2.744145] usb 4-2.1: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 2.744360] usb 4-2.1: adding 4-2.1:1.0 (config #1, interface 0) Nov 8 23:05:54 knummi kernel: [ 2.745332] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 2.745438] usbhid 4-2.1:1.0: usb_probe_interface Nov 8 23:05:54 knummi kernel: [ 2.745439] usbhid 4-2.1:1.0: usb_probe_interface - got id Nov 8 23:05:54 knummi kernel: [ 2.748013] input: 607 PS/2-Cable To USB Converter V:2.2 as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-2/4-2.1/4-2.1:1.0/input/input4 Nov 8 23:05:54 knummi kernel: [ 2.748085] generic-usb 0003:0111:0111.0002: input,hidraw1: USB HID v1.00 Keyboard [607 PS/2-Cable To USB Converter V:2.2] on usb-0000:04:00.0-2.1/input0 Nov 8 23:05:54 knummi kernel: [ 2.748103] usb 4-2.1: adding 4-2.1:1.1 (config #1, interface 1) Nov 8 23:05:54 knummi kernel: [ 2.748118] usbhid 4-2.1:1.1: usb_probe_interface Nov 8 23:05:54 knummi kernel: [ 2.748119] usbhid 4-2.1:1.1: usb_probe_interface - got id Nov 8 23:05:54 knummi kernel: [ 2.750943] input: 607 PS/2-Cable To USB Converter V:2.2 as /devices/pci0000:00/0000:00:07.0/0000:04:00.0/usb4/4-2/4-2.1/4-2.1:1.1/input/input5 Nov 8 23:05:54 knummi kernel: [ 2.751028] generic-usb 0003:0111:0111.0003: input,hidraw2: USB HID v1.10 Joystick [607 PS/2-Cable To USB Converter V:2.2] on usb-0000:04:00.0-2.1/input1 Nov 8 23:05:54 knummi kernel: [ 2.751079] hub 4-2:1.0: port 3, status 0101, change 0000, 12 Mb/s Nov 8 23:05:54 knummi kernel: [ 2.813073] usb 4-2.3: new full speed USB device number 5 using xhci_hcd Nov 8 23:05:54 knummi kernel: [ 2.874025] usb 4-2.3: skipped 1 descriptor after interface Nov 8 23:05:54 knummi kernel: [ 2.874027] usb 4-2.3: udev 5, busnum 4, minor = 388 Nov 8 23:05:54 knummi kernel: [ 2.874029] usb 4-2.3: New USB device found, idVendor=0a12, idProduct=0001 Nov 8 23:05:54 knummi kernel: [ 2.874035] usb 4-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 
Nov  8 23:05:54 knummi kernel: [    2.874099] usb 4-2.3: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 2.874101] usb 4-2.3: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 2.876061] usb 4-2.3: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 2.877319] usb 4-2.3: adding 4-2.3:1.0 (config #1, interface 0) Nov 8 23:05:54 knummi kernel: [ 2.877357] usb 4-2.3: adding 4-2.3:1.1 (config #1, interface 1) Nov 8 23:05:54 knummi kernel: [ 2.877377] usb 4-2.3: adding 4-2.3:1.2 (config #1, interface 2) Nov 8 23:05:54 knummi kernel: [ 2.877416] hub 4-2:1.0: port 4, status 0101, change 0000, 12 Mb/s Nov 8 23:05:54 knummi kernel: [ 2.939074] usb 4-2.4: new high speed USB device number 6 using xhci_hcd Nov 8 23:05:54 knummi kernel: [ 3.167171] usb 4-2.4: skipped 1 descriptor after configuration Nov 8 23:05:54 knummi kernel: [ 3.167173] usb 4-2.4: skipped 8 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167175] usb 4-2.4: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 3.167177] usb 4-2.4: skipped 43 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167181] usb 4-2.4: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 3.167183] usb 4-2.4: skipped 4 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167184] usb 4-2.4: skipped 2 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167185] usb 4-2.4: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 3.167187] usb 4-2.4: skipped 2 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167188] usb 4-2.4: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 3.167189] usb 4-2.4: skipped 2 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167191] usb 4-2.4: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 3.167192] usb 4-2.4: skipped 2 descriptors after interface Nov 8 23:05:54 knummi kernel: [ 3.167193] usb 4-2.4: skipped 1 descriptor after endpoint Nov 8 23:05:54 knummi kernel: [ 3.168313] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 3.168942] usb 4-2.4: default language 0x0409 Nov 8 23:05:54 knummi kernel: [ 3.171119] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep Nov 8 23:05:54 knummi kernel: [ 3.171709] usb 4-2.4: udev 6, busnum 4, minor = 389 Nov 8 23:05:54 knummi kernel: [ 3.171711] usb 4-2.4: New USB device found, idVendor=046d, idProduct=0825 Nov 8 23:05:54 knummi kernel: [ 3.171718] usb 4-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 Nov 8 23:05:54 knummi kernel: [ 3.171722] usb 4-2.4: SerialNumber: C6CC2D90 
Nov  8 23:05:54 knummi kernel: [    3.171786] usb 4-2.4: usb_probe_device
Nov 8 23:05:54 knummi kernel: [ 3.171787] usb 4-2.4: configuration #1 chosen from 1 choice Nov 8 23:05:54 knummi kernel: [ 3.172746] usb 4-2.4: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 3.172788] usb 4-2.4: adding 4-2.4:1.0 (config #1, interface 0) Nov 8 23:05:54 knummi kernel: [ 3.172816] usb 4-2.4: adding 4-2.4:1.1 (config #1, interface 1) Nov 8 23:05:54 knummi kernel: [ 3.172829] usb 4-2.4: adding 4-2.4:1.2 (config #1, interface 2) Nov 8 23:05:54 knummi kernel: [ 3.172842] usb 4-2.4: adding 4-2.4:1.3 (config #1, interface 3) Nov 8 23:05:54 knummi kernel: [ 3.172866] hub 4-2:1.0: state 7 ports 4 chg 0000 evt 0010 Nov 8 23:05:54 knummi kernel: [ 3.204063] ohci_hcd 0000:00:12.0: auto-stop root hub Nov 8 23:05:54 knummi kernel: [ 3.204078] ohci_hcd 0000:00:13.0: auto-stop root hub Nov 8 23:05:54 knummi kernel: [ 3.204087] ohci_hcd 0000:00:14.5: auto-stop root hub Nov 8 23:05:54 knummi kernel: [ 3.204099] ohci_hcd 0000:00:16.0: auto-stop root hub Nov 8 23:05:54 knummi kernel: [ 7.773853] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null) 
Nov  8 23:05:54 knummi kernel: [    9.962309] udev[474]: starting version 163
Nov  8 23:05:54 knummi kernel: [   11.085439] Bluetooth: Core ver 2.16
Nov 8 23:05:54 knummi kernel: [ 11.085456] NET: Registered protocol family 31 Nov 8 23:05:54 knummi kernel: [ 11.085457] Bluetooth: HCI device and connection manager initialized Nov 8 23:05:54 knummi kernel: [ 11.085459] Bluetooth: HCI socket layer initialized Nov 8 23:05:54 knummi kernel: [ 11.085460] Bluetooth: L2CAP socket layer initialized Nov 8 23:05:54 knummi kernel: [ 11.085464] Bluetooth: SCO socket layer initialized Nov 8 23:05:54 knummi kernel: [ 11.091855] MCE: In-kernel MCE decoding enabled. Nov 8 23:05:54 knummi kernel: [ 11.095935] Bluetooth: Generic Bluetooth USB driver ver 0.6 Nov 8 23:05:54 knummi kernel: [ 11.095949] btusb 4-2.3:1.0: usb_probe_interface Nov 8 23:05:54 knummi kernel: [ 11.095951] btusb 4-2.3:1.0: usb_probe_interface - got id Nov 8 23:05:54 knummi kernel: [ 11.170439] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 
Nov  8 23:05:54 knummi kernel: [   11.183447] EDAC MC: Ver: 2.1.0
Nov  8 23:05:54 knummi kernel: [   11.305541] Linux media interface: v0.10
Nov  8 23:05:54 knummi kernel: [   11.393060] AMD64 EDAC driver v3.4.0
Nov  8 23:05:54 knummi kernel: [   11.393178] EDAC amd64: DRAM ECC disabled.
Nov 8 23:05:54 knummi kernel: [ 11.393184] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Nov 8 23:05:54 knummi kernel: [ 11.393185] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. Nov 8 23:05:54 knummi kernel: [ 11.393186] (Note that use of the override may cause unknown side effects.) Nov 8 23:05:54 knummi kernel: [ 11.406270] EXT4-fs (md1): re-mounted. Opts: user_xattr,errors=remount-ro Nov 8 23:05:54 knummi kernel: [ 11.507951] Intel AES-NI instructions are not detected. Nov 8 23:05:54 knummi kernel: [ 11.518111] btusb 4-2.3:1.2: usb_probe_interface Nov 8 23:05:54 knummi kernel: [ 11.518114] btusb 4-2.3:1.2: usb_probe_interface - got id Nov 8 23:05:54 knummi kernel: [ 11.518130] usbcore: registered new interface driver btusb Nov 8 23:05:54 knummi kernel: [ 11.553026] Linux video capture interface: v2.00 Nov 8 23:05:54 knummi kernel: [ 11.556489] uvcvideo 4-2.4:1.0: usb_probe_interface Nov 8 23:05:54 knummi kernel: [ 11.556492] uvcvideo 4-2.4:1.0: usb_probe_interface - got id Nov 8 23:05:54 knummi kernel: [ 11.556508] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825) Nov 8 23:05:54 knummi kernel: [ 11.556899] usb 4-2.4: Successful Endpoint Configure command Nov 8 23:05:54 knummi kernel: [ 11.565397] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,errors=remount-ro Nov 8 23:05:54 knummi kernel: [ 11.705757] saa7146: register extension 'budget_av'. Nov 8 23:05:54 knummi kernel: [ 11.705823] budget_av 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Nov 8 23:05:54 knummi kernel: [ 11.705869] saa7146: found saa7146 @ mem ffffc900117ae000 (revision 1, irq 20) (0x153b,0x1157). Nov 8 23:05:54 knummi kernel: [ 11.705873] saa7146 (0): dma buffer size 192512 Nov 8 23:05:54 knummi kernel: [ 11.705875] DVB: registering new adapter (Terratec Cinergy 1200 DVB-T) Nov 8 23:05:54 knummi kernel: [ 11.723928] adapter failed MAC signature check Nov 8 23:05:54 knummi kernel: [ 11.723930] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff Nov 8 23:05:54 knummi kernel: [ 11.791031] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Nov 8 23:05:54 knummi kernel: [ 11.820062] hda_codec: ALC892: BIOS auto-probing. Nov 8 23:05:54 knummi kernel: [ 11.827179] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 Nov 8 23:05:54 knummi kernel: [ 11.827364] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 
Nov  8 23:05:54 knummi kernel: [   11.827367] hda_intel: Disabling MSI
Nov 8 23:05:54 knummi kernel: [ 11.827400] snd_hda_intel 0000:01:00.1: setting latency timer to 64 Nov 8 23:05:54 knummi kernel: [ 11.955418] KNC1-0: MAC addr = 00:0a:ac:11:01:c6 Nov 8 23:05:54 knummi kernel: [ 12.000993] r8169 0000:02:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2) Nov 8 23:05:54 knummi kernel: [ 12.011185] r8169 0000:02:00.0: eth0: link down Nov 8 23:05:54 knummi kernel: [ 12.011190] r8169 0000:02:00.0: eth0: link down Nov 8 23:05:54 knummi kernel: [ 12.011841] ADDRCONF(NETDEV_UP): eth0: link is not ready Nov 8 23:05:54 knummi kernel: [ 12.078069] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 Nov 8 23:05:54 knummi kernel: [ 12.117059] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 Nov 8 23:05:54 knummi kernel: [ 12.156060] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 Nov 8 23:05:54 knummi kernel: [ 12.172106] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... Nov 8 23:05:54 knummi kernel: [ 12.172211] budget-av: ci interface initialised. Nov 8 23:05:54 knummi kernel: [ 12.172258] budget_av 0000:06:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Nov 8 23:05:54 knummi kernel: [ 12.172294] saa7146: found saa7146 @ mem ffffc9001195c000 (revision 1, irq 21) (0x153b,0x1157). Nov 8 23:05:54 knummi kernel: [ 12.172298] saa7146 (1): dma buffer size 192512 Nov 8 23:05:54 knummi kernel: [ 12.172300] DVB: registering new adapter (Terratec Cinergy 1200 DVB-T) Nov 8 23:05:54 knummi kernel: [ 12.191064] adapter failed MAC signature check Nov 8 23:05:54 knummi kernel: [ 12.191066] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff Nov 8 23:05:54 knummi kernel: [ 12.196033] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 Nov 8 23:05:54 knummi kernel: [ 12.199674] kjournald starting. Commit interval 5 seconds Nov 8 23:05:54 knummi kernel: [ 12.214251] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7 Nov 8 23:05:54 knummi kernel: [ 12.214295] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8 Nov 8 23:05:54 knummi kernel: [ 12.214336] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9 Nov 8 23:05:54 knummi kernel: [ 12.214375] input: HDA NVidia HDMI/DP as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10 Nov 8 23:05:54 knummi kernel: [ 12.289248] EXT3-fs (md0): using internal journal Nov 8 23:05:54 knummi kernel: [ 12.289252] EXT3-fs (md0): mounted filesystem with ordered data mode Nov 8 23:05:54 knummi kernel: [ 12.532260] KNC1-1: MAC addr = 00:0a:ac:11:02:44 Nov 8 23:05:54 knummi kernel: [ 12.633258] DVB: registering adapter 1 frontend 0 (Philips TDA10046H DVB-T)... Nov 8 23:05:54 knummi kernel: [ 12.633463] budget-av: ci interface initialised. Nov 8 23:05:54 knummi kernel: [ 13.154236] r8169 0000:05:00.0: eth1: link down Nov 8 23:05:54 knummi kernel: [ 13.154880] ADDRCONF(NETDEV_UP): eth1: link is not ready Nov 8 23:05:55 knummi kernel: [ 13.596502] sshd (1114): /proc/1114/oom_adj is deprecated, please use /proc/1114/oom_score_adj instead. Nov 8 23:05:55 knummi kernel: [ 14.101409] r8169 0000:02:00.0: eth0: link up Nov 8 23:05:55 knummi kernel: [ 14.102101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Nov 8 23:05:56 knummi kernel: [ 14.821373] r8169 0000:05:00.0: eth1: link up Nov 8 23:05:56 knummi kernel: [ 14.822023] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Nov 8 23:05:58 knummi kernel: [ 16.940121] audit_printk_skb: 57 callbacks suppressed Nov 8 23:05:58 knummi kernel: [ 16.940123] type=1400 audit(1320786358.734:31): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1207 comm="apparmor_parser" Nov 8 23:05:59 knummi kernel: [ 17.245545] ip_tables: (C) 2000-2006 Netfilter Core Team Nov 8 23:05:59 knummi kernel: [ 17.816220] Netfilter messages via NETLINK v0.30. Nov 8 23:05:59 knummi kernel: [ 17.828933] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) Nov 8 23:05:59 knummi kernel: [ 17.974851] ip6_tables: (C) 2000-2006 Netfilter Core Team Nov 8 23:05:59 knummi kernel: [ 17.975149] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 Nov 8 23:05:59 knummi kernel: [ 17.975151] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. Nov 8 23:05:59 knummi kernel: [ 18.010707] ctnetlink v0.93: registering with nfnetlink. Nov 8 23:05:59 knummi kernel: [ 18.076707] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully Nov 8 23:06:00 knummi kernel: [ 18.410271] xt_time: kernel timezone is +0200 
Nov  8 23:06:00 knummi kernel: [   18.518999] Bridge firewalling registered
Nov  8 23:06:00 knummi kernel: [   18.779421] u32 classifier
Nov  8 23:06:00 knummi kernel: [   18.779423]     Actions configured
Nov 8 23:06:03 knummi kernel: [ 21.568088] xhci_hcd 0000:04:00.0: xHCI host not responding to stop endpoint command. Nov 8 23:06:03 knummi kernel: [ 21.568098] xhci_hcd 0000:04:00.0: Assuming host is dying, halting host. Nov 8 23:06:03 knummi kernel: [ 21.568154] Bluetooth: hci0 urb ffff880220c78b40 failed to resubmit (22) Nov 8 23:06:03 knummi kernel: [ 21.568283] Bluetooth: hci0 urb ffff88021f1e29c0 failed to resubmit (22) Nov 8 23:06:03 knummi kernel: [ 21.568399] Bluetooth: hci0 urb ffff88021f1e20c0 failed to resubmit (22) Nov 8 23:06:03 knummi kernel: [ 21.568520] xhci_hcd 0000:04:00.0: HC died; cleaning up Nov 8 23:06:03 knummi kernel: [ 21.568647] hub 4-0:1.0: state 0 ports 2 chg 0000 evt 0000 Nov 8 23:06:03 knummi kernel: [ 21.568656] usb 4-2.4: modprobe timed out on ep0out len=0/0 Nov 8 23:06:03 knummi kernel: [ 21.568669] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. Nov 8 23:06:03 knummi kernel: [ 21.568677] usb 4-1: USB disconnect, device number 2 
Nov  8 23:06:03 knummi kernel: [   21.568683] usb 4-1: unregistering device
Nov 8 23:06:03 knummi kernel: [ 21.568690] usb 4-1: unregistering interface 4-1:1.0 Nov 8 23:06:03 knummi kernel: [ 21.568698] uvcvideo: Failed to query (129) UVC probe control : -19 (exp. 26). Nov 8 23:06:03 knummi kernel: [ 21.568723] uvcvideo: Failed to initialize the device (-5). Nov 8 23:06:03 knummi kernel: [ 21.568962] snd-usb-audio 4-2.4:1.2: usb_probe_interface Nov 8 23:06:03 knummi kernel: [ 21.568976] snd-usb-audio 4-2.4:1.2: usb_probe_interface - got id Nov 8 23:06:03 knummi kernel: [ 21.568983] usbcore: registered new interface driver uvcvideo 
Nov  8 23:06:03 knummi kernel: [   21.568989] USB Video Class driver (1.1.1)
Nov 8 23:06:03 knummi kernel: [ 21.584409] usb 4-1: usb_disable_device nuking all URBs Nov 8 23:06:03 knummi kernel: [ 21.584462] usb 4-2.4: Not enough bandwidth for altsetting 1 Nov 8 23:06:03 knummi kernel: [ 21.584475] 6:3:1: cannot set freq 16000 to ep 0x86 Nov 8 23:06:03 knummi kernel: [ 21.584508] usb 4-2.4: Not enough bandwidth for altsetting 2 Nov 8 23:06:03 knummi kernel: [ 21.584515] 6:3:2: cannot set freq 24000 to ep 0x86 Nov 8 23:06:03 knummi kernel: [ 21.584533] usb 4-2.4: Not enough bandwidth for altsetting 3 Nov 8 23:06:03 knummi kernel: [ 21.584540] 6:3:3: cannot set freq 32000 to ep 0x86 Nov 8 23:06:03 knummi kernel: [ 21.584560] usb 4-2.4: Not enough bandwidth for altsetting 4 Nov 8 23:06:03 knummi kernel: [ 21.584566] 6:3:4: cannot set freq 48000 to ep 0x86 Nov 8 23:06:03 knummi kernel: [ 21.584584] usb 4-2.4: Not enough bandwidth for altsetting 0 Nov 8 23:06:03 knummi kernel: [ 21.584973] usb 4-2: USB disconnect, device number 3 Nov 8 23:06:03 knummi kernel: [ 21.584980] usb 4-2.1: USB disconnect, device number 4 
Nov  8 23:06:03 knummi kernel: [   21.584987] usb 4-2.1: unregistering device
Nov 8 23:06:03 knummi kernel: [ 21.584993] usb 4-2.1: unregistering interface 4-2.1:1.0 Nov 8 23:06:03 knummi kernel: [ 21.585345] usbcore: registered new interface driver snd-usb-audio Nov 8 23:06:03 knummi kernel: [ 21.600419] usb 4-2.1: unregistering interface 4-2.1:1.1 Nov 8 23:06:03 knummi kernel: [ 21.610455] usb 4-2.1: usb_disable_device nuking all URBs Nov 8 23:06:03 knummi kernel: [ 21.614251] usb 4-2.3: USB disconnect, device number 5 
Nov  8 23:06:03 knummi kernel: [   21.614259] usb 4-2.3: unregistering device
Nov 8 23:06:03 knummi kernel: [ 21.614266] usb 4-2.3: unregistering interface 4-2.3:1.0 Nov 8 23:06:03 knummi kernel: [ 21.615037] usb 4-2.3: unregistering interface 4-2.3:1.1 Nov 8 23:06:03 knummi kernel: [ 21.615116] usb 4-2.3: unregistering interface 4-2.3:1.2 Nov 8 23:06:03 knummi kernel: [ 21.615164] usb 4-2.3: usb_disable_device nuking all URBs Nov 8 23:06:03 knummi kernel: [ 21.616854] usb 4-2.4: USB disconnect, device number 6 
Nov  8 23:06:03 knummi kernel: [   21.616862] usb 4-2.4: unregistering device
Nov 8 23:06:03 knummi kernel: [ 21.616869] usb 4-2.4: unregistering interface 4-2.4:1.0 Nov 8 23:06:03 knummi kernel: [ 21.616945] usb 4-2.4: unregistering interface 4-2.4:1.1 Nov 8 23:06:03 knummi kernel: [ 21.616990] usb 4-2.4: unregistering interface 4-2.4:1.2 Nov 8 23:06:03 knummi kernel: [ 21.617535] usb 4-2.4: unregistering interface 4-2.4:1.3 Nov 8 23:06:03 knummi kernel: [ 21.617595] usb 4-2.4: usb_disable_device nuking all URBs 
Nov  8 23:06:03 knummi kernel: [   21.617794] usb 4-2: unregistering device
Nov 8 23:06:03 knummi kernel: [ 21.617802] usb 4-2: unregistering interface 4-2:1.0 Nov 8 23:06:03 knummi kernel: [ 21.617887] usb 4-2: usb_disable_device nuking all URBs Nov 8 23:06:03 knummi kernel: [ 21.618069] hub 5-0:1.0: state 0 ports 2 chg 0000 evt 0000 Nov 8 23:06:03 knummi kernel: [ 21.792610] type=1400 audit(1320786363.587:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2212 comm="apparmor_parser" Nov 8 23:06:03 knummi kernel: [ 21.792674] type=1400 audit(1320786363.587:33): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2212 comm="apparmor_parser" Nov 8 23:06:04 knummi kernel: [ 22.678116] ADDRCONF(NETDEV_UP): virbr0: link is not ready Nov 8 23:06:05 knummi kernel: [ 23.661842] Adding 7992252k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:7992252k 
Nov  8 23:06:06 knummi kernel: [   24.146040] eth0: no IPv6 routers present
Nov  8 23:06:06 knummi kernel: [   25.082047] eth1: no IPv6 routers present
Nov 8 23:06:18 knummi kernel: [ 36.258492] EXT4-fs (md1): re-mounted. Opts: user_xattr,errors=remount-ro,commit=0 Nov 8 23:06:18 knummi kernel: [ 36.263331] EXT4-fs (sda1): re-mounted. Opts: user_xattr,errors=remount-ro,commit=0 

Regards,
Tomi Orava


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux