Re: USB-C Devices only show up if connected at boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26 January 2018 at 08:31, Mika Westerberg
<mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> On Fri, Jan 26, 2018 at 08:07:56AM +0000, Mike Lothian wrote:
>> Whether CONFIG_HOTPLUG_PCI_ACPI=y or CONFIG_HOTPLUG_PCI_ACPI=n the
>> device doesn't show unless echo 1 > /sys/bus/pci/rescan is issued
>
> That's not how it is supposed to work. Please send me full dmesg and in
> addition acpidump of the system (or attach it to the bugzilla bug). Also
> share your .config.

I've attached my full dmesg and .config to the bug. The acpidump info
can be found at https://bugzilla.kernel.org/show_bug.cgi?id=198051,
the current kernel has the attached patch to enable
AcpiGbl_ParseTableAsTermList, the bug also contains a dmesg without it
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux