On Saturday February 21, 2009, NBeing wrote: > Greetings all. I have some problems getting the g_ether and WinXP working. My > Info: > > Board: AT91SAM9261-EK (Atmel) > Kernel: 2.6.28.2 (Also Tried 2.6.24.3) > > I've read a bunch of posts here, IE "RNDIS Regression: > http://thread.gmane.org/gmane.linux.usb.general/15210";. They have a simular > problem to me but also said 2.6.24 worked fine (which I tried and had the same > problem)... You tried 2.6.24.3. I remember there was a regression that was fixed between this and 2.6.24.7 I'm willing to bet 2.6.24.7 will work for you (or 2.6.25 or 26 for that matter). (Note that it is an old kernel and you might want to upgrade...) You might want to try this: <http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=41566bcf35a8b23ce4715dadb5acfd1098c1d3e4> For 2.6.28 however, I do not know what the problem is. Hope this helps, Anand > > I've read the online tutorials I could find, mainly: > 1. Linux-USB Gadget API Framework (2005) - http://www.linux-usb.org/ > 2. GumStix ScreenShots (2006) - http://www.gumstix.org/tikiwiki/tiki-index.php? > page=Windows_XP_usbnet > 3. USB Networking - Setting up usbnet (2006) - > http://www.davehylands.com/linux/gumstix/usbnet/ > > They are all a few years old but I couldn't get them working. This is what > happens. > > --Init Information-- > # modprobe g_ether > g_ether gadget: using random self ethernet address > g_ether gadget: using random host ethernet address > usb0: MAC 02:dd:9b:79:81:66 > usb0: HOST MAC d2:4c:7f:34:4f:44 > g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 > g_ether gadget: g_ether ready > *Everything looks fine on the board I think, I can see usb0, and assign IP etc* > > --Connect to Windows XP SP3-- > Linux: g_ether gadget: full speed config #2: RNDIS > Windows: > a) Install Driver *following online tutorial* > b) Linux USB Ethernet/RNDIS Gadget (Yellow Explination Mark) > c) This device cannot start. (Code 10) > > > I've tried linux.inf files I found online, the origional through a UNIX2DOS, > and the origional. They all produce the same output. > > > I've used the "File-backed Storage" Gadget and it works fine for me. I can > also hook the board to the network with the Ethernet Jack on the Evaluation Kit > which works fine (I wont have an Ethernet Jack in Final Version though). > > As I'm very new to the USB stuff and couldn't find much tutorials online, would > there be anything I'm doing wrong? Some command-line arguments to the g_ether > command I should try, or something additional I need to do on Windows XP SP3? > Maybe someone has a modified linux.inf that I need? > > Note: I did try the "lsusb -v" "lspci -v" which showed nothing. There is > no "/proc/bus/usb/devices" on my board. I used Buildroot 2009.02 to create my > binaries. I'm not too sure how to get more information from Windows XP. > > Thanks In Advance > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
